1. Realization of high-efficiency and high-output characteristics of magnetic power generators using single-phase angle transformation and three-phase six-wire winding (this opens in a new tab) | Ching-Chuan Lin, Chang-Ren Chen |
2. Carbon nanotubes: a review on properties, synthesis methods and applications in micro and nanotechnology (this opens in a new tab) | Rizwan Shoukat, Muhammad Imran Khan |
3. The status and perspectives of nanostructured materials and fabrication processes for wearable piezoresistive sensors (this opens in a new tab) | William Chiappim et al. |
4. Optimization of MEMS capacitive accelerometer (this opens in a new tab) | Mourad Benmessaoud, Mekkakia Maaza Nasreddine |
5. Material selection for optimum design of MEMS pressure sensors (this opens in a new tab) | Zahid Mehmood, Ibraheem Haneef, Florin Udrea |
6. Development of an E-nose system using machine learning methods to predict ventilator-associated pneumonia (this opens in a new tab) | Yu-Hsuan Liao et al. |
7. An overview of additive manufacturing (3D printing) for microfabrication (this opens in a new tab) | Bharat Bhushan, Matt Caspers |
8. Microgripper design and evaluation for automated µ-wire assembly: a survey (this opens in a new tab) | H. Llewellyn-Evans, C. A. Griffiths, A. Fahmy |
9. Design principles and considerations for the ‘ideal’ silicon piezoresistive pressure sensor: a focused review (this opens in a new tab) | S. Santosh Kumar, B. D. Pant |
10. Lab-on-a-chip: a component view (this opens in a new tab) | Y. C. Lim, A. Z. Kouzani, W. Duan |
11. Piezoelectric micropumps: state of the art review (this opens in a new tab) | Hamid Asadi Dereshgi, Huseyin Dal, Mustafa Zahid Yildiz |
12. Assessing the electricity energy efficiency of university campus exterior lighting system and proposing energy-saving strategies for carbon emission reduction (this opens in a new tab) | Alper Kerem |
13. Research development of silicon MEMS gyroscopes: a review (this opens in a new tab) | Guo Zhanshe, Cheng Fucheng, Li Boyu, Cao Le, Lu Chao, Song Ke |
14. External temperature sensor assisted a new low power photoplethysmography readout system for accurate measurement of the bio-signs (this opens in a new tab) | Rajeev Kumar Pandey, Paul C.-P. Chao |
15. Carbon nanotubes/nanofibers (CNTs/CNFs): a review on state of the art synthesis methods (this opens in a new tab) | Rizwan Shoukat, Muhammad Imran Khan |
16. Unidirectional voltage converter for battery electric vehicle ultrafast charger (this opens in a new tab) | Jerzy Ryszard Szymanski, Marta Zurek-Mortka, Dulal Acharjee |
17. Solvent-based bonding of PMMA–PMMA for microfluidic applications (this opens in a new tab) | Mohammad M. Faghih, M. Keith Sharp |
18. Wide bandgap semiconductor thin films for piezoelectric and piezoresistive MEMS sensors applied at high temperatures: an overview (this opens in a new tab) | M. A. Fraga, H. Furlan, R. S. Pessoa, M. Massi |
19. Sensing viscosity and density of glycerol–water mixtures utilizing a suspended plate MEMS resonator (this opens in a new tab) | Samir Cerimovic et al. |
20. High-throughput battery materials testing based on test cell arrays and dispense/jet printed electrodes (this opens in a new tab) | Robert Hahn et al. |
21. A review on RF micro-electro-mechanical-systems (MEMS) switch for radio frequency applications (this opens in a new tab) | Kurmendra, Rajesh Kumar |
22. Validation of evaluation model and evaluation indicators comprised Kansei Engineering and eye movement with EEG: an example of medical nursing bed (this opens in a new tab) | Zhiyong Zhou, Jianxin Cheng, Wheijane Wei, Laichung Lee |
23. Anisotropic etching of silicon in KOH + Triton X-100 for 45° micromirror applications (this opens in a new tab) | Krzysztof P. Rola |
24. Microfluidic ratio metering devices fabricated in PMMA by CO2 laser (this opens in a new tab) | M. Tweedie, P. D. Maguire |
25. A review on piezoelectric energy harvesting (this opens in a new tab) | E. L. Pradeesh, S. Udhayakumar, M. G. Vasundhara, G. K. Kalavathi |