Indentation and scratch tests on sputtered amorphous CNX films deposited on plasma-nitrided Ti-6Al-4V Yongqing FuNee Lam LohJun Wei OriginalPaper 01 October 2000 Pages: 499 - 505
Response of ductile metal sheet parameters to the cone angle of indenting conical tool and fracture toughness evaluation Malik M. NazeerM. Afzal KhanA.-ul Haq OriginalPaper 01 October 2000 Pages: 489 - 498
Carbide and hardness development in the heat-affected zone of tempered and postweld heat-treated 2.25Cr-1Mo steel weldments B. E. PeddleC. A. Pickles OriginalPaper 01 October 2000 Pages: 477 - 488
Anelastic deformation measurements in structural engineering alloys J. D. Cotton OriginalPaper Pages: 463 - 466
Kinetics of plasma nitriding and renitriding of 3% Cr-Mo-V steel E. RolinskiD. ClubineR. Notman OriginalPaper Pages: 457 - 462
Microstructural features of prematurely failed hot-strip mill work rolls: Some studies in spalling propensity Amitava RayM. S. PrasadS. Jha OriginalPaper Pages: 449 - 456
An investigation of the reduction in tensile strength and fatigue life of pre-corroded 7075-T6 aluminum alloy B. ObertK. NgoT. P. Sivam OriginalPaper Pages: 441 - 448
Determining the effect of microstructure and heat treatment on the mechanical strengthening behavior of an aluminum alloy containing lithium precipitation hardened with the δ′ Al3Li intermetallic phase James M. FragomeniBen M. Hillberry OriginalPaper Pages: 428 - 440
Reactive magnetron sputtering of indium tin oxide films on acrylics—Electrical resistivity and optical properties Jow-Lay HuangYin-Tsan JahSu-Shia Lin OriginalPaper Pages: 424 - 427
Recrystallization behavior of rolled ingots of 6061 and 6069 aluminum alloys X. LiM. E. KassnerS. C. Bergsma OriginalPaper Pages: 416 - 423
The Jominy end quench for light-weight alloy development J. W. NewkirkD. S. MacKenzie OriginalPaper Pages: 408 - 415
Corrosion fatigue behavior of the high-strength magnesium alloy AZ 80 M. HilpertL. Wagner OriginalPaper Pages: 402 - 407
Effects of microstructures on corrosion and stress corrosion behaviors of an Al-12.1 at.% Zn alloy M. S. YehL. C. TsaoT. H. Chuang OriginalPaper Pages: 396 - 401
A study of thermal parameters and interdendritic feeding in lost foam casting Qiming ChenC. Ravindran OriginalPaper Pages: 386 - 395
Investigation on the constitution and mechanical characteristic of composite containing silicon-carbide produced by electroless co-deposition Y. C. WuG. H. LiG. M. Song OriginalPaper Pages: 379 - 385
Characterization and sinterability of oxide-dispersion strengthened nickel powder produced by mechanical alloying K. E. MohamedH. P. BuchkremerD. Stover OriginalPaper Pages: 370 - 378
Regression analysis of the mechanical properties—Composition dependencies for cast low- and medium-carbon steels Y. Unigovsky OriginalPaper Pages: 365 - 369
Application of doppler broadening of annihilation radiation technique to evaluate the microhardness variations during isochronal annealing of Al and Al (Mn) alloys M. Abd El WahabW. Arafa OriginalPaper Pages: 355 - 358
Effect of aging on oxidation behavior of aluminum-albite composites at high temperatures S. C. Sharma OriginalPaper Pages: 344 - 349
Corrosion resistance of a new AL 6013-20 SiC(P) in salt spray chamber Zaki AhmadB. J. Abdul Aleem OriginalPaper Pages: 338 - 343
Behavior of Fe-Mn-Al-C steels during cyclic tests I. S. KalashnikovO. AcselradM. S. Khadyyev OriginalPaper Pages: 334 - 337
Application of shape memory alloy wire actuator for precision position control of a composite beam Gangbing SongP. C. LamB. N. Agrawa OriginalPaper Pages: 330 - 333
Tensile strengthening in the nickel-base superalloy IN738LC E. BalikciA. RamanR. A. Mirshams OriginalPaper Pages: 324 - 329
Environmental degradation of materials during wet storage of spent nuclear fuels Vivekanand KainP. K. DeP. Seetharamaih OriginalPaper Pages: 317 - 323
Phase transformation of a CuZnAl alloy during friction Xiaoxia ZhouYonghong PanXiuqin Wei OriginalPaper Pages: 311 - 316
Effect of microvoid formation on the tensile properties of dual-phase steel Ejaz AhmadTanvir ManzoorJ. I. Akhter OriginalPaper Pages: 306 - 310
Surface engineering with light alloys—Hard coatings, thin films, and plasma nitriding A. S. KorhonenE. Harju OriginalPaper Pages: 302 - 305
Effect of die-casting conditions on viscoelastic behavior of Mg alloy E. M. GutmanYa. B. UnigovskiZ. Koren OriginalPaper Pages: 297 - 301
A review of microsegregation induced banding phenomena in steels John D. Verhoeven ReviewPaper Pages: 286 - 296
Use of metallic glasses in molybdenum disilicide-stainless steel joining Rajendra U. VaidyaPartha RangaswamyDarryl P. Butt OriginalPaper Pages: 280 - 285
Composite microstructure of cold-drawn pearlitic steel and its role in stress corrosion behavior J. ToribioE. Ovejero OriginalPaper Pages: 272 - 279
An investigation on the elastic modulus and density of vacuum casted aluminum alloy 2024 containing lithium additions C. Meric OriginalPaper Pages: 266 - 271
An optimal heat treatment cycle for a 26Cr, 2Mo stainless steel Muhammad Iqbal QureshiMohammad Mujahid OriginalPaper Pages: 261 - 265
The degradation of corrosion resistance for Al 5083 alloy after thermal and superplastic forming processes J. C. ChangT. H. Chuang OriginalPaper Pages: 253 - 260
Electron microscopy structure study of laser-clad TiC-Ni particle-reinforced coating J. H. OuyangXiaodong LiT. C. Lei OriginalPaper 01 April 2000 Pages: 234 - 246
Structure and friction-reducing property of the sulfide layer produced by ion sulfuration Zhang NingZhuang Da-MingGuan Ming-Xi OriginalPaper 01 April 2000 Pages: 228 - 233
Effect of beta flecks on low-cycle fatigue properties of Ti-10V-2Fe-3Al Zeng WeidongZhou YigangYu Hanqing OriginalPaper 01 April 2000 Pages: 222 - 227
Microstructure design and heat treatment selection for casting alloys using the quality index C. H. Cáceres OriginalPaper 01 April 2000 Pages: 215 - 221
An investigation on quench cracking behavior of superalloy udimet 720LI using a fracture mechanics approach J. MaoK. -M. ChangD. Furrer OriginalPaper 01 April 2000 Pages: 204 - 214
Effect of austempering time on mechanical properties of a low manganese austempered ductile iron Susil K. PutatundaPavan K. Gadicherla OriginalPaper 01 April 2000 Pages: 193 - 203
The determination of initial blank shape by using the one-step finite element method and experimental verification D. W. JungS. J. Lee OriginalPaper 01 April 2000 Pages: 183 - 192
On predicting forming limits using hill’s yield criteria Siguang XuKlaus J. Weinmann OriginalPaper 01 April 2000 Pages: 174 - 182
On the initial stage of plastic deformation of metal alloys L. B. ZuevV. I. DanilovS. Yu Zavodchikov OriginalPaper 01 April 2000 Pages: 170 - 173
Study of workability limits of porous materials under different upsetting conditions by compressible rigid plastic finite element method X. Q. ZhangY. H. PengS. C. Wu OriginalPaper 01 April 2000 Pages: 164 - 169
Flexible graphite for gasketing, adsorption, electromagnetic interference shielding, vibration damping, electrochemical applications, and stress sensing D. D. L. Chung OriginalPaper 01 April 2000 Pages: 161 - 163
Effect of prior β-grain size on the hot deformation behavior of Ti-6Al-4V: Coarse vs coarser Y. V. R. K. PrasadT. SeshacharyuluW. G. Frazier OriginalPaper 01 April 2000 Pages: 153 - 160
Deformation of specimen during laser surface remelting Janez GrumRoman Šturm OriginalPaper 01 April 2000 Pages: 138 - 146
Hot strip processing of low carbon enameling grades in the range of 600 to 700 °C A. Van CauterJ. DilewijnsB. C. De Cooman OriginalPaper 01 April 2000 Pages: 131 - 137
