Manufacturing Engineering

1. Front Matter

   Pages i-xii

   PDF

2. Investigations on the Development of Heated Build Platform for Additive Manufacturing of Large-Size Parts

   • Sagar Kailas Gawali, Narendra Kumar, Prashant K. Jain

   Pages 1-17

3. On the Numerical Investigation of Material Deposition in Fused Filament Fabrication

   • Anand Singh Yadav, Narendra Kumar, Prashant K. Jain

   Pages 19-36

4. An Experimental Investigation on Fabricating Objects for Origami Applications Through Fused Filament Fabrication (FFF)

   • Jitesh Katre, Prashant K. Jain

   Pages 37-50

5. Study of Microstructure, Hardness and Dimensional Accuracy in Al-6061 Centrifugally Cast Pipe

   • Abdul Rouf Ganai, Balbir Singh

   Pages 51-60

6. Micro-hardness Study of Ni–P, Ni–W–P, and Ni–P/Ni–W–P Electroless Coating

   • Rishav Kumar Baranwal, Arghya Mukherjee, Souparna Banerjee, Subhasish Sarkar, Gautam Majumdar

   Pages 61-71

7. Mechanical Stability of Fabricated Superhydrophobic Aluminium Alloy and Enhancement of Its Oleophobic Characteristics

   • Rishabh Raj, Saurabh Kango, Sarbjot S. Sandhu

   Pages 73-84

8. Design and Development of High-Velocity Submerged Water Jet Cavitation Erosion Test Rig

   • Anuj Bansal, Jonny Singla, Shivam Pandey, Prem Raj

   Pages 85-93

9. Development of Durable Super-Hydrophobic Surface on WC–Co–Cr Coated ASTM A988 Stainless Steel Substrate

   • Vijay Kumar, Rajeev Verma

   Pages 95-108

10. Experimental Validation of Thermal Properties on Composite Thermal Barrier Coating

    • Muhammed Naseem O, Rajeev Verma

    Pages 109-120

11. Surface Modification of Al–4.5%Cu/MoS2 Composites by Laser Surface Melting

    • Praveen Kumar Bannaravuri, Anil Kumar Birru, Uday S. Dixit

    Pages 121-137

12. Configuration Design Development of Internal Bore GTAW Welding

    • Harsh Radadiya, Ashish Yadav, Jaydeep Joshi, Arun Kumar Chakraborty, Navneet Khanna

    Pages 139-157

13. Effect of Tool Rotation on Metal Removal Rate During Electro-Discharge Machining of Hastelloy C-276

    • Nikhil Jain, Jinesh Kumar Jain, Bhuvnesh Bhardwaj

    Pages 159-171

14. Vibration Analysis of BTA Deep Hole Drilling Machine

    • Ahmed M. Zakwan, Nilesh Raykar

    Pages 173-182

15. Influence of Process Parameters on Tool Wear Rate for Rotary Cu Tool Electrode in Electrical Discharge Drilling

    • Rakesh Kumar, Anand Pandey, Pooja Sharma, Ashish Goyal, Satish Namdev

    Pages 183-193

16. Machinability Study of Zirconia Material by Micro-ECDM

    • Manoj Kumar, Rahul Omprakash Vaishya, Narendra Mohan Suri

    Pages 195-209

17. Experimental Investigation on the Effect of Grinding Infeed and Pass Counts on Grindability of Mild Steel

    • Pranab Kumar Kundu, Bishan Raj Rai, Manish Mukhopadhyay

    Pages 211-219

18. Effect of Cryogenic Treatment on Mechanical and Metallurgical Properties of SS410

    • Amrinder Singh, Anuj Bansal, Jagtar Singh, Anil Kumar Singla

    Pages 221-229

19. Effect of Tool Rotation on Surface Roughness During Electro Discharge Machining of Hastelloy C-276

    • Nikhil Jain, Jinesh Kumar Jain, Bhuvnesh Bhardwaj

    Pages 231-243

20. Advances in Electrical Discharge Machining: State-of-the-Art

    • Krishnakant Dhakar, Milind Dandekar, Mohit Tyagi

    Pages 245-254

This volume comprises select peer-reviewed contributions from the International Conference on Production and Industrial Engineering (CPIE) 2019. The contents focus on latest research in production and manufacturing engineering including case studies with analytical models and latest numerical approaches. The topics covered include micro, nano, and non-conventional machining, additive manufacturing, casting and forming, joining processes, vibrations and acoustics, materials and processing, product design and development, industrial automation, CAD/CAM and robotics, and sustainability in manufacturing. The book can be useful for students, researchers, and professionals working in manufacturing and production engineering, and other allied fields.

• Micro Machining
• Nano Machining
• Non-Conventional Machining
• Additive Manufacturing
• Casting and Forming
• Joining Processes (Welding)
• Vibrations and Acoustics (Condition Monitoring)
• Materials and Processing
• Industrial Automation
• CAD/CAM and Robotics
• Industry 4.0
• IIOT
• CPIE 2019

• School of Mechanical, Industrial and Aeronautical Engineering, University of Witwatersrand, Johannesburg, South Africa

  Vishal S. Sharma

• Department of Mechanical Engineering, Indian Institute of Technology Guwahati, Guwahati, India

  Uday S. Dixit

• Department of Mechanical and Industrial Engineering, Norwegian University of Science and Technology, Trondheim, Norway

  Knut Sørby

• Department of Industrial and Production Engineering, Dr. B. R. Ambedkar National Institute of Technology, Jalandhar, India

  Arvind Bhardwaj, Rajeev Trehan

Dr. Vishal S. Sharma is currently working as Associate Professor at School of Mechanical, Industrial and Aeronautical Engineering at University of Witwatersrand, Johannesburg, South Africa. Prior to his joining at WITS University he was Professor at the Department of Industrial and Production Engineering at Dr. B. R. Ambedkar National Institute of Technology, Jalandhar. He obtained his bachelor’s degree (Production Engineering) from Shivaji University, Kolhapur in the year 1992; Masters in Mechanical (Production) Engineering from Punjab University Chandigarh in 1998; and his Ph.D. in Mechanical Engineering from Kurukshetra University in the year 2005. He also received a postdoctoral fellowship from ENSAM Cluny, France in 2010. He has three years of industrial exposure and 23 years of teaching experience at Dr B R Ambedkar National Institute of Technology Jalandhar, India. He has published more than 70 scientific papers in international journals and conferences, and edited morethan 10 books and proceedings. His current research interests include additive manufacturing and machining, condition monitoring and industrial IOT/Industry 4.0.


Dr. Uday S. Dixit is a Professor at the Department of Mechanical Engineering at IIT Guwahati. He received his bachelor’s degree (Mechanical Engineering) from IIT Roorkee in 1987; and his masters and Ph.D. (Mechanical Engineering) from IIT Kanpur in 1993 and 1998, respectively. He has published over 200 scientific papers in international journals and conferences and edited more than 12 books and proceedings. He has also undertaken 19 research and consultancy projects. In addition to developing course material on mechatronics for IGNOU, and on engineering mechanics for NPTEL, he has produced QIP course material in the area of “Finite Element Method in Engineering and its applications in manufacturing”, and “Introduction to Micro-manufacturing Technologies”. His research interests include plasticity, metal forming, laser-based manufacturing, finite element modeling, and optimization. He has authored/edited more than 15 books and proceedings.


Dr. Knut Sørby is a Professor at Department of Mechanical & Industrial Engineering at Norwegian University of Science and Technology (NTNU), Trondhiem, Norway. He completed PhD and Post-doc fellowship from NTNU, Norway. He is Research Adviser at Sandvik Teeness. Prof. Sørby is having keen interest in machining processes. He has worked on preparation of control programs for multi-axis machines, kinematics for multi-axis machines, efficient processing of complex shaped products, tool life modelling, machining cost models, optimization of machining efficiency, and milling and turning of nickel based alloys with ceramic cutting tools. He has developed vibration absorbers for cutting tools: design and optimization of damping systems for machining processes, modeling and design of damping systems for multiple modes of vibration in boring bars, theoretical and experimental modal analysis, numerical methods for simulation of time response, instrumentation and vibration monitoring, and systems for active vibration suppression. He is Board member of the Norwegian association for machining technology - Technical expert for Norwegian Accreditation in laboratory accreditation.


Dr. Arvind Bhardwaj received his Bachelor in Mechanical Engineering from the Punjab University, India in 1988, and PhD from the Kurukshetra University, India in 2006. He is working as a Professor in the Department of Industrial and Production Engineering at Dr. B.R. Ambedkar National Institute of Technology, Jalandhar (An Institute of National Repute established by Government of India), Punjab, India. He is also looking after the responsibility of Dean Research and Consultancy. He has one years of industrial and more than 27 years of teaching experience. His areasof research are supply chain management, operations management, optimisation of production systems and ergonomics. He has published more than 100 articles in various international journals and conferences.


Dr. Rajeev Trehan is working as an Associate Professor in the Department of Industrial and Production Engineering at Dr. B.R. Ambedkar National Institute of Technology, Jalandhar. He holds a PhD degree in Industrial Engineering. He has more than three years’ experience in industry and 17 years’ experience of teaching UG and PG students. He has guided 20 MTech thesis and having three PhD students. His area of interest is quality management, advanced manufacturing and has published more than 15 articles on these topics in different journals and conferences.

Policies and ethics