Mine Planning and Equipment Selection

A New Solution Supporting the Designing Process of Mining Operations in Underground Coal Mines

Pages 53-63

Edyta, Brzychczy

Principles of Cyclic-Flow Technology in the Development of Deep Pits

Pages 65-73

Bukeikhanova, S. (et al.)

The Mining Technology of a Thick Overburden Layer Covering a Group of Flat Dipping Coal Seams

Pages 75-80

Fomin, S. I. (et al.)

Evaluation of Rock Mass Characteristics Using Measurement While Drilling in Boliden Minerals Aitik Copper Mine, Sweden

Pages 81-91

Ghosh, Rajib (et al.)

Geo-statistical Simulation for Open Pit Design Optimization and Mine Economic Analysis in Decision-Making

Pages 93-103

Jalloh, Abu Bakarr (et al.)

Sea-Floor Massive Sulfide Mining – Its Possibility and Difficulties to Emerge as a Future Business

Pages 105-112

Masuda, Nobuyuki (et al.)

Optimizing of Long-Term Mine Planning in Large Lignite Deposits

Pages 113-124

Minnecker, Corinna (et al.)

Justification of Countours Belonging to the Stages of Mining Steeply Dipping Deposits Using the Solution of the Problem of Nonlinear Programming

Pages 125-132

Moldabayev, Serik Kurashovich (et al.)

Development of a Decision Tool for Mine Planning Purposes – Ventilation on Demand

Pages 133-141

Noll, Sascha (et al.)

Evaluation of Top Coal Yielding Potential in Longwall All Top Coal Caving Mining

Pages 143-149

Oraee-Mirzamani, Behdeen

Mine Design Selection Considering Sustainable Development

Pages 151-163

Morteza, Osanloo (et al.)

Ventilation Design of Long Sub-surface Headings during Drivage

Pages 165-174

Pandey, Jai Krishna

Highwall Mining in India

Pages 175-187

Dixit, S. K. (et al.)

Underground Mine Dewatering System Below +500 MASL South Ciurug

Pages 189-196

Prilendi, Denny

Determining the Most Effective Factors on Open Pit Mine Plans and Their Interactions

Pages 197-207

Mahdi, Rahmanpour (et al.)

Minimizing the Time of Reaching the Final Depth in the Pit of the First Train When Extracting the Elongated Steep-Dipping Deposits

Pages 209-216

Rakishev, Bayan Rakishevich (et al.)

Technical and Economy Study of Polymetallic Nodules Seabed Mining

Pages 217-225

Rybár, Pavol (et al.)

Preliminary Study on Design of Longwall Mining from Final Highwall at Mae Moh Lignite Mine in Thailand

Pages 227-234

Shibata, Shitoku (et al.)

The Increase of Gold Ore Production Effectiveness on the Opencast of JSC “VASIL’EVSKIY RUDNIK”

Pages 235-242

Vorobiev, A. E. (et al.)

Comparative Study on the Standardization System Construction in Coal Industry between China and Abroad

Pages 243-249

Lei, Wang (et al.)

Opencast Quarries: Vibration Assessing Methods

Pages 253-260

Degan, Guido Alfaro (et al.)

Damage Analysis in Rock Rotary Tricones Bit – A Case Study

Pages 261-269

Barzegar, Milad (et al.)

The Analysis of Cuttability Properties of Model Samples Prepared with Different Strength

Pages 271-278

Bilim, Niyazi (et al.)

Beneficiation of Bitumen Deposit at Selenice (Albania)

Pages 279-289

Ciccu, Raimondo (et al.)

Possibilities and Restrictions for the New Generation of Mining Machines Using Mechanical Excavation Methods in Complex Drift Driving Systems in Underground Hard-Rock Mining

Pages 291-301

Dietze, Anne (et al.)

Cutting Parameters Optimization for Difficult Excavating Conditions with Bucket Wheel Excavators on Gracanica Opencast Mine in Gacko

Pages 303-310

Ignajtovic, Dragan (et al.)

Selecting the Appropriate Cutting Technique for a Given Rock – Part I

Pages 311-320

Keller, Andreas (et al.)

Bucket Wheel Excavator Boom Length Optimization for Selective Operation on Radljevo Opencast Mine in Kolubara Coal Basin

Pages 321-333

Pavlovic, Vladimir (et al.)

Blast Free Mining in Indian Surface Coal Mines – Current Trend

Pages 335-357

Pradhan, G. K. (et al.)

Rock Destruction by Shearing on Surface of Elemetary Prisms

Pages 359-366

Rakhmankulov, R. R. (et al.)

Mechanical Excavation and Drilling and Blasting – A Comparison Using Discrete Event Simulation

Pages 367-377

Skawina, Bartłomiej (et al.)

Modeling of Short Term Production Scheduling with the Objective Grade Control

Pages 379-387

Yavarzadeh, Saeid (et al.)

Backfill Practices for Sublevel Stoping System

Pages 391-402

Emad, Muhammad Zaka (et al.)

Development of Grouting Material for Fly Ash Backfilling by Application of Chemical Injection

Pages 403-410

Shimada, Hideki (et al.)

Bolting Procedures in Outokumpu’s Kemi Mine

Pages 411-420

Gustafson, Anna (et al.)

Mechanical Properties of New Concrete-Filled Steel Tubular Support

Pages 421-430

Xuebin, Li (et al.)

Wedge Analysis for Determining Ground Support Demand in Pongkor GMBU Underground Mine PT. Antam (Persero) Tbk

Pages 431-445

Pratama, Ryan (et al.)

Strength Assessments of Concrete-Filled Steel Tubular Support of Soft Rock Roadway

Pages 447-456

Qu, Guanglong (et al.)

Stability Analysis and Design of Highway Mitigation Which Is the Base of the Victorious Sole Access to the Pongkor Gold Mine PT. ANTAM, (Persero) Tbk

Pages 457-469

Sriwidada, W. (et al.)

Design and Dimensioning of Mine Support Suitable for Mine “Elazite”

Pages 471-479

Draganov, Lilian (et al.)

Numerical Models Currently Being Developed for Use in Mining Industry

Pages 481-490

Gharehdash, Saba (et al.)

Geotechnical Considerations for Mining Method Selection of a Potential Underground Iron Ore Mine in Mideastern, Turkey

Pages 491-500

Tutluoglu, Levend (et al.)

Analysis of Roof Caving Characteristics at a Coal Mine by Using Full Scale 3D Numerical Modeling

Pages 501-509

Ünver, Bahtiyar (et al.)

Electromagnetic Radiation Response of Surrounding Rock Stress Relaxation Zone in Excavation Roadway and Its Application

Pages 511-520

Li, Zhonghui (et al.)

Early-Warning of Rockbursts Based on Time Series Analysis of Electromagnetic Radiation Data

Pages 521-527

Liu, Xiao-fei (et al.)

Stress-Strain-Electrical Resistance Characterization of Rock Material under Triaxial Loading

Pages 529-539

Mesutoğlu, Mehmet (et al.)

Slope Stability Analysis by Hoek–Brown Failure Criterion

Pages 541-550

Shashenko, Oleksandr Mykolayovych (et al.)

Design Improvements for a True Triaxial Cell to Monitor Initiation and Propagation of Damage and Body Cracks during Testing

Pages 551-560

Schwartzkopff, Adam Karl (et al.)

Application of Electromagnetic Radiation (EMR) Technology in Monitoring and Warning of Coal and Rock Dynamic Disasters

Pages 561-568

Wang, En-yuan (et al.)

Impact of Diesel Equipment on Ventilation in Quebec Underground Mines

Pages 571-579

Mafuta, Rody K. (et al.)

Coal and Gas Outburst Prevention Technology and Management System for Chinese Coal Mines: A Review

Pages 581-600

Hao, Fuchang (et al.)

Fatal Accidents and Rockfalls in Peruvian Underground Mines

Pages 601-609

Iramina, Wilson S. (et al.)

Importance of the Gas Factor in the Process of Formation of Outburst Zones in Coal Veins

Pages 611-618

Rustam, Khojayev (et al.)

Geological Factors Controlling H2S in Coal Seams

Pages 619-627

Deng, Qigen (et al.)

Numerical Simulation of the Influence of Water Inrush on Underground Coal Mining Stability in Vietnam

Pages 629-636

Nguyen, Quang Phich (et al.)

Investigation of Spontaneous Combustion of Coal in Underground Coal Mining

Pages 637-644

Ozdeniz, Hadi (et al.)

Development Strategy to Prevent Accidents in Indonesian Surface Coal Mines

Pages 645-657

Permana, H. (et al.)

The Influence of the Noise on Mine Surveyer

Pages 659-664

Zverevich, Victor V. (et al.)

The Determination of Quartz Percentages in Coal Dust Emission during the Anthracite Coal Cutting by Mechanical Cutting Tool

Pages 665-676

Van, Phan Quang (et al.)

New Ore Deposits Opening: Aspects of Ecological Safety Ensuring

Pages 677-684

Butakov, Artem (et al.)

Comparative Criteria for a Dynamic Approach to Environmental Impact Assessment and Its Influence in Mine Planning

Pages 685-696

Castilla-Gomez, Jorge (et al.)

Innovative Dewatering Concepts for Open Cast Mines Using Horizontal Wells (HDD-Wells)

Pages 697-706

Eichler, Richard A. (et al.)

The Evolution of Disposal Methods in the Alumina Industry

Pages 707-717

Cigagna, Marco (et al.)

Evaluation of Blast Induced Vibration and Air Blast Measurements Nearby a Residential Area

Pages 719-727

Kekeç, Bilgehan (et al.)

The Analysis of the Mining University’s Research and Educational Centre Activity in the Area of Environmental Protection from the Negative Effect of Solid-Waste Storages

Pages 729-735

Kulikova, Maria (et al.)

The Condition of the Atmospheric Air in Ekibastuz City

Pages 737-738

Mardenov, M. P. (et al.)

Emissions of Fugitive Dust from Mine Dumps and Tailing Basins in South-Western Sardinia

Pages 739-747

Cigagna, Marco (et al.)

Determination of Safe Distance While Blasting at Open Pit Mine Zabrdica, Valjevo

Pages 749-758

Trajković, Slobodan (et al.)

Present and Trends of Reclamations within North Bohemian Brown-Coal District

Pages 761-772

Dirner, Vojtech (et al.)

Geochemical Characterization for Prediction of Acid Rock Drainage Potential in Hydrothermal Deposit

Pages 773-779

Gautama, Rudy Sayoga (et al.)

Introduction to Concurrent Mining and Reclamation for Coal Mines in China

Pages 781-789

Hu, Zhenqi (et al.)

Closure Risk Assessment in Atashkooh Stone Quarry Using Risk Matrix

Pages 791-802

Gheisari, Narges (et al.)

Study on Backfilling of Soil for Revegetation at the Rehabilitation Area in Indonesian Coal Mine

Pages 803-811

Hamanaka, Akihiro (et al.)

Large Reclamation Constructions in Suburbs of Sokolov Town in the Czech Republic

Pages 813-821

Leitgeb, Jiří (et al.)

Study on the Water Quality Prediction of Acid Mine Drainage from Many Different Perspectives

Pages 823-831

Matsumoto, Shinji (et al.)

Challenges in Modern Lignite Mining – Mass Management to Protect the Environment and the Budget

Pages 833-842

Simon, A. (et al.)

Dominance Level of Significant Features in Post-mining Landscapes as a Predictor of Perceived Scenic Beauty

Pages 843-853

Svobodova, Kamila (et al.)

Geotechnical and Hydrogeological Evaluation of Artificial Soils to Remediate Acid Mine Drainage and Improve Mine Rehabilitation – An Australian Case Study

Pages 855-865

Taylor, Michael (et al.)

The Use of Simulation in Fleet Selection and Equipment Sizing in Mining

Pages 869-877

Ortiz, Carlos Enrique Arroyo (et al.)

Modeling Principles at Development of Computer – Aided Design in Ore Mine

Pages 879-889

Bukeikhanov, D. G.

Artificial Intelligence and Prediction of Rock Fragmentation

Pages 891-898

Dhekne, P. Y. (et al.)

Application of CFD Programs and Supercomputing in Mining

Pages 899-910

Vladimir, Kebo (et al.)

Mining Production Information and Visualization Systems Based on Internet of Things

Pages 911-920

Oldřich, Kodym (et al.)

Pile Shape Measuring in Excavating and Loading by Wheel Loader

Pages 921-929

Koyachi, Noriho (et al.)

Utilize Jacobian Transformation to Build Up an Auto-voltage Tap Changer Selection System for Transformer Substations in Vietnamese Coal Mines

Pages 931-941

Thanh, Le Xuan (et al.)

Improvement of the Execution Time of a Cellular Automaton for Subsidence Prediction

Pages 943-953

Saavedra-Rosas, Jose (et al.)

Fundamentals for the Development of a Knowledge Management System for a Specialised Mining Contractor

Pages 955-966

Schöneshöfer, Moritz (et al.)

Application of Nonlinear Interpolation Based Methods in Open Pit Mines Planning and Design

Pages 967-978

Shishvan, Masoud Soleymani (et al.)

Study on the Propagation of Blast-Induced Ground Vibration and Its Control Measure in Open Pit Mine

Pages 979-986

Yamaguchi, T. (et al.)

Moving towards Real-Time Management of Mineral Reserves – A Geostatistical and Mine Optimization Closed-Loop Framework

Pages 989-999

Benndorf, Jörg

Monitoring of the Mineralogical Composition of Carboniferous Mine Wastes from the Hard Coal Mine “Bogdanka” (Lublin Coal Basin, Poland)

Pages 1001-1006

Bzowski, Zbigniew

Successful Use of Optimisation Software at RWE Generation SE to Support Coal Logistics Dispatching in the Rhenish Lignite Mining Area

Pages 1007-1015

Mittmann, Robert

Modeling Blending Process at Open-Pit Stockyards: A Northern Kazakhstan Mining Company Case Study

Pages 1017-1027

Statsenko, Larissa (et al.)

Analysis of Quarterly Production Scheduling Using Ore Blending Strategy Case Study Pit 7A and 15 Block a Tayan Bauxite Mine, PT ANTAM (Persero) Tbk.

Pages 1029-1036

Wibowo, Gembong Suryo (et al.)

Leaching of a Turkish Lateritic Nickel Ore in Nitric Acid Solution

Pages 1039-1045

Agacayak, Tevfik (et al.)

Mechanochemical Activation of the Ore and Coal Tailings in the Desintegrators

Pages 1047-1056

Golik, Vladimir I. (et al.)

Effective Ways of Extraction of Precious Metals from Resistant Ores

Pages 1057-1060

Alexandrova, T. N. (et al.)

Modern Directions of Perfection of Technology of Complex Processing of Low-Grade Aluminum Containing Raw Material with the Expansion of the Assortment of the Products

Pages 1061-1068

Sizyakova, E. V. (et al.)

Decrease of Power Consumption in Fine Grinding of Minerals

Pages 1069-1079

Pivnyak, G. G. (et al.)

Optimization Gold Cyanidation Process to Increase Gold Extraction at Pongkor Gold Mining Business Unit Indonesia

Pages 1081-1089

Pratomo, S. T. Adam

Effect of Operational Parameters on the Particle Size Distribution of Marble Wastes in Stirred Media Mill

Pages 1091-1100

Taner, Hasan Ali (et al.)

Activation of Technogenic Resources in Disintegrators

Pages 1101-1106

Golik, Vladimir I. (et al.)

Influence of Vegetable Polymers’ Nature on Carbon Materials Structure Formation

Pages 1107-1115

Yefremova, Svetlana (et al.)

Conveyor Belt Condition Evaluation via Non-Destructive Testing Techniques

Pages 1119-1126

Blazej, Ryszard (et al.)

Rock Excavation by Drilling and Blasting: Evaluation of the Performance of the Equipment in an Open Pit Limestone Quarry

Pages 1127-1142

Cardu, Marilena (et al.)

Evaluation of Haul Trucks Performance in a CSN Mine

Pages 1143-1150

Curi, Adilson (et al.)

System Reliability Investigation of Draglines Using Fault Tree Analysis

Pages 1151-1158

Demirel, Nuray (et al.)

LIBS – A New Approach on Automating Extraction Machinery in Firedamp Atmospheres

Pages 1159-1172

Nienhaus, Karl (et al.)

Fusion of Operations, Event-Log and Maintenance Data: A Case Study for Optimising Availability of Mining Shovels

Pages 1173-1194

Galar, Diego (et al.)

Determination of Optimal Time Intervals for the Dragline Maintenance Using Probabilistic Approaches

Pages 1195-1203

Gölbaşi, Onur (et al.)

The Potential of Automatic Identification and Augmented Reality in Mining

Pages 1205-1213

Vladimir, Kebo (et al.)

Growth Directions of the Electric Drive of the Mining and Transport Complex and Control and Diagnostic Systems of Electromechanical Equipment

Pages 1215-1220

Kozyaruk, Anatoliy Evtihievich

Bottomhole Formation Zone Completion through Ultra Deep Multibranch Channels: Experimental Research of a New Technology

Pages 1221-1229

Aleksandrovich, Lyagov Ilya

A New Cost-Effective Active Structural Health Monitoring Technology for Detecting Shear Bands in Poorly Cemented Sands Leading to Exploration Borehole Collapse

Pages 1231-1241

Melkoumian, Nouné Sophie (et al.)

Peat Surface Mining Methods and Equipment Selection

Pages 1243-1249

Mikhailov, Aleksandr

Rock Slope Surface Monitoring Technologies with Focus on Ground-Based Synthetic Aperture Radar

Pages 1251-1263

Mitri, Hani (et al.)

Feasibility of Using Electric Trucks in Deep Metal Mines

Pages 1265-1275

Paraszczak, Jacek (et al.)

Approaches for a Quality-Controlled Selective Mining in German Opencast Lignite Mines Using Different Sensor Technologies

Pages 1277-1284

Pfütze, Martin (et al.)

Self-propelled Mining Machine Monitoring System – Data Validation, Processing and Analysis

Pages 1285-1294

Zimroz, Radoslaw (et al.)

The Particularities of Russian Surface Mining Equipment Market

Pages 1297-1305

Anistratov, K. (et al.)

Schemes of Exploitation in Open Pit Mining

Pages 1307-1323

Arteaga, Felipe (et al.)

Financial Compensation for the Use of Mineral Resources at the Minas Gerais State – Brazil

Pages 1325-1334

Candia, Renan C. (et al.)

Influence of the Future Mine Radljevo at the Demography Viewed through Socio-economic Conditions of Local Population during Mine’s Development

Pages 1335-1345

Drljevic, Nadica

Mine Facility Location Selection in Open-Pit Mines Based on a New Multistep-Procedure

Pages 1347-1360

Fazeli, M. (et al.)

Challenges in the South African Platinum Sector

Pages 1361-1368

Genc, Bekir (et al.)

Analysis of Mine Mobile Fleet Maintenance vs. Mine Roads Maintenance for Optimum Performance

Pages 1369-1380

Hamoudeh, Youssef (et al.)

Using an Expert System as a Management Tool to Identify Alternative Solutions That Support the Development of Artisanal and Small-Scale Mining

Pages 1381-1389

Griessl, E. (et al.)

Development of Open Pit’s Technological Scheme Subject to Cleaning-Up of Manganese Ore Reserves

Pages 1391-1396

Gumenik, Il’ya L. (et al.)

Transition from Surface to Underground Mining in the Arctic Region: A Case Study from Svartliden Gold Mine, Sweden

Pages 1397-1408

Hassan, Syed Alley (et al.)

Analysis of the Status and Problems of Development of Mineral Resources Base of Mining and Metallurgical Complexes of the Countries Customs Union

Pages 1409-1417

Lissenkov, Alexandr Alexandrovich

Mine Planning and Equipment Selection Supply Chain of Rare Earth Elements (REEs)

Pages 1419-1426

Liu, Jiangxue (et al.)

Establishing a Sustainable Model to Reduce the Risk of Mine Closure

Pages 1427-1436

Mansouri, Mohajer (et al.)

Dealing with NIMBYism in Mining Operations

Pages 1437-1446

Menegaki, M. (et al.)

Techno-economic Review of a Rare Earth Elements Carbonatite Prospect

Pages 1447-1457

Tayelor, Richard (et al.)

Prospects of Complex Opening of Group of Middle-Sized and Small Iron-Ore Deposits

Pages 1459-1465

Yedilbayev, Abdraman (et al.)

Owner versus Contract Miner a South African Update

Pages 1467-1474

Rupprecht, Steven Michael

A Prototype Decision Making Tool of Coal Mine Planning Using System Dynamics Model

Pages 1475-1484

Sontamino, Phongpat (et al.)

Opportunity of Low Rank Coal Development in Indonesia

Pages 1485-1494

Winarno, Tri (et al.)

Significant Factors That Influence Motivation of Employees within the Mining Sector

Pages 1495-1502

Yasrebi, Amir Bijan (et al.)

Valuation of Mining Operation with Uncertainty and the Power of Waiting – A Real Option Method

Pages 1503-1512

Zhang, Kuangyuan (et al.)