Light Metals 2020

Ionic Effect of NaCl and KCl on the Flotation of Diaspore and Kaolinite Using Sodium Oleate as Collector

Pages 40-46

Fang, Chaojun (et al.)

Quantifying the Effect of Seeds on Gibbsite Crystallization—Mathematical Modelling of Particle Size Distribution

Pages 47-53

Franco, Thiago T. (et al.)

Experimental Study on Flow Field Characteristics in Seed Precipitation Tank and Influence on Physical Properties of Al(OH)3 Products

Pages 54-59

Zou, Xiangyu (et al.)

Application of Advanced Oxidative Process for Organic Compounds Removal from Bayer Liquor

Pages 60-64

Soplin, Miguel Antonio (et al.)

A Review of Comprehensive Utilization of High-Iron Red Mud of China

Pages 65-71

Zhang, Ting’an (et al.)

Conversion Behavior of Iron-Containing Minerals in the Process of Dissolving High-Iron Bauxite by Starch Hydrothermal Method

Pages 72-84

He, Yongfei (et al.)

Disc Magnetic Separator Applied to the Extraction of Magnetite in Bauxite Residue

Pages 85-91

Robert, Y. (et al.)

Recovery of Iron from High-Iron Bayer Red Mud by Smelting Reduction

Pages 92-97

Wang, Kun (et al.)

Bayer Process Towards the Circular Economy—Metal Recovery from Bauxite Residue

Pages 98-106

Freitas Marques Araújo, Paula (et al.)

Bayer Process Towards the Circular Economy—Soil Conditioners from Bauxite Residue

Pages 107-114

Holanda, Roseanne Barata (et al.)

Brazilian Bauxite Residue Physical–Chemical Characterization and Acidic Neutralization Potential

Pages 115-123

Silva, Patricia Magalhães Pereira (et al.)

Effect of Concentrations and Pressures of CO2 on Calcification–Carbonation Treatment of Bauxite Residue

Pages 124-128

Chao, Xi (et al.)

Comprehensive Utilization of Red Mud Through the Recovery of Valuable Metals and Reuse of the Residue

Pages 129-135

Lyu, Fei (et al.)

A Review of Research on Alumina Extraction from High-Alumina Fly Ash and a New Method for Preparing Alumina by Electrotransformation

Pages 136-142

Han, Xiu-xiu (et al.)

Effect of Sodium Alkali Concentration on Calcification–Carbonization Process

Pages 143-150

Chen, Yang (et al.)

Stress Characterization of Bore-Chilled Sand Cast Aluminum Engine Blocks in As-Cast and T7 Condition with Application of Neutron Diffraction

Pages 153-157

Stroh, J. (et al.)

Molecular Dynamics Simulations of the Solidification of Pure Aluminium

Pages 158-167

Papanikolaou, Michail (et al.)

Nanoindentation and Cavitation-Induced Fragmentation Study of Primary Al3Zr Intermetallics Formed in Al Alloys

Pages 168-173

Priyadarshi, Abhinav (et al.)

In Situ Neutron Diffraction Solidification Analyses of Rare Earth Reinforced Hypoeutectic and Hypereutectic Aluminum–Silicon Alloys

Pages 174-178

Stroh, J. (et al.)

Influence of TiB2 Particles on Modification of Mg2Si Eutectic Phase in Al–Zn–Si–Mg–Cu Cast Alloys

Pages 179-184

Kim, Byung Joo (et al.)

A Statistical Analysis to Study the Effect of Silicon Content, Surface Roughness, Droplet Size and Elapsed Time on Wettability of Hypoeutectic Cast Aluminum–Silicon Alloys

Pages 185-193

Kordijazi, Amir (et al.)

Aluminum Trace Elements Analyses Using Epsilon 1 Meso EDXRF Technique

Pages 194-203

Al Halwachi, Hussain

Effect of Cooling Rate During Solidification of Aluminum–Chromium Alloy

Pages 204-209

Muthusamy, G. (et al.)

Effects of Si on the Electrical Conductivity, Microhardness, Microstructure and Hot Tearing of Al–0.8Fe–0.5Mg–0.4Ni Alloys

Pages 210-215

Kotiadis, Stephanie (et al.)

The Efficacy of Replacing Metallic Cerium in Aluminum–Cerium Alloys with LREE Mischmetal

Pages 216-221

Sims, Zachary C. (et al.)

Effects of Sc and Y on the As-Cast Microstructure of AA6086

Pages 222-226

Žist, Sandi (et al.)

Ternary Interactions and Implications for Third Element Alloying Potency in Al–Ce-Based Alloys

Pages 227-232

Henderson, Hunter B. (et al.)

Development and Analysis of Al7075 Alloy Materials Using Press and Sinter Processing

Pages 233-240

Johnson, Steven C. (et al.)

Formation of Rare Earth Intermetallics in Al–Cu Cast Alloys

Pages 241-246

Mahmoud, M. G. (et al.)

Retrogression Forming and Reaging of AA7075-T6 Alclad to Produce Stampings with Peak Strength

Pages 247-252

Rader, Katherine E. (et al.)

High Cycle Fatigue Properties of the Zr-Modified Al–Si–Cu–Mg Alloy at Elevated Temperatures

Pages 253-260

Liu, Guangyu (et al.)

Effect of Mo on Elevated-Temperature Low-Cycle Fatigue Behavior of Al-Si 356 Cast Alloy

Pages 261-266

Chen, S. (et al.)

State Parameter-Based Simulation of Temperature- and Strain Rate Dependent Flow Curves of Al-Alloys

Pages 267-271

Viernstein, Bernhard (et al.)

Coarsening-Resistance of a Severely Deformed Al-0.2 wt% Sc Alloy

Pages 272-276

Huang, Yan

The Effect of Modified Strain-Induced Melt Activation (Modified SIMA) Process on the Microstructure and Mechanical Properties of Al-7Si Alloy

Pages 277-282

Choudhary, Chandan (et al.)

Effect of Mg on Flow Behavior of Al–Mg Alloys and Its Constitutive Modeling Using Finite Element Analysis

Pages 283-288

Ahmad, Shahin (et al.)

Influence of Thermal Treatment and Design Parameters on the Fatigue Life of Automotive Control Arm Fabricated from A357 Semi-solid Alloy

Pages 289-296

Attia, Mohamed (et al.)

The Formation of Al6(Fe, Mn) Phase in Die-Cast Al–Mg Alloys

Pages 297-300

Zhu, Xiangzhen (et al.)

Spark Plasma Sintering of Graphene Nanoplatelets Reinforced Aluminium 6061 Alloy Composites

Pages 301-311

Khan, Mahmood (et al.)

Effects of Mn and Mo Micro-additions on Al–Zr–Sc–Er–Si Mechanical Properties

Pages 312-317

Shu, Shipeng (et al.)

Nanotreating High-Zinc Al–Zn–Mg–Cu Alloy by TiC Nanoparticles

Pages 318-323

Yuan, Jie (et al.)

Microstructure and Mechanical Response of an Artificially Aged Al–Mg–Si Alloy: Experiments and Modeling

Pages 324-330

Kim, Yoojin (et al.)

Effect of Zn Additions on the Mechanical Properties of High Strength Al–Si–Mg–Cu Alloys

Pages 331-337

Jung, Sung Su (et al.)

Utilization of 3D Printed Materials in Expendable Pattern Casting Process

Pages 338-344

Handayani, Dika (et al.)

Hemming Evolution of 6xxx Aluminum Alloys in the Course of Natural Aging Following the Continuous Annealing

Pages 345-351

Lalpoor, M. (et al.)

The Effect of Deformation Mode and Microstructure on the IGC Susceptibility of Al–Mg–Si–Cu Alloys for Automotive Applications

Pages 352-361

Müller-Jena, R. (et al.)

Evolution of Grain Refinement in AA5083 Sheet Metal Processed by ECAP

Pages 362-369

Illgen, Christian (et al.)

Mechanical and Microstructural Behavior of Dissimilar AA2014-T6 and AA7075-T6 Aluminium Alloys Joined by Friction Stir Welding

Pages 370-379

Adil, Mohammad (et al.)

High Strength Nanotreated Filler Material for TIG Welding of AA6061

Pages 380-385

Sokoluk, Maximilian (et al.)

Optimization of Thermo-Mechanical Processes of Continuous Casting Products Using High Magnesium Aluminum Alloys in Automotive Industry Applications

Pages 386-399

Demir, Görkem (et al.)

Plastic Flow of AA6013-T6 at Elevated Temperatures and Subsequent Reaging to Regain Full Strength

Pages 400-405

Rader, Katherine E. (et al.)

Influence of Chemical Composition and Pre-deformation on the Age-Hardening Response of Al-Mg-Si Alloys

Pages 406-411

Wimmer, A.

Hot Deformation and Die-Quenching of 6000-Series Alloys—The Effect of Quench-Interruption Temperature

Pages 412-418

Pettersen, Tanja (et al.)

Descriptors and Predictors: New Tools for the Predictive Modelling of Production Paths and the Properties of Aluminum-Based End-Products

Pages 419-424

Kevorkijan, Varužan

Effect of Extrusion Parameters on Microstructural and Mechanical Properties of EN AW 6063

Pages 425-432

Güner, Mehmet Buğra (et al.)

Simulation Study on Equal Channel Right Angular Extrusion Process of Aluminum Alloy 6061

Pages 433-439

Jiang, Wenhuan (et al.)

Characterization of Dynamic Material Property of AlSi10 Mg Aluminum Alloy Under High Strain Rate Compressive Loading

Pages 440-444

Salah Uddin, Md (et al.)

Current Efficiency for Direct Production of an Aluminium–Titanium Alloy by Electrolysis in a Laboratory Cell

Pages 445-451

Awayssa, Omar (et al.)

Corrosion Inhibition Effect of Aloe Saponaria Gel on the Corrosion Resistance of Aluminum

Pages 452-459

Friedrich, Malena Soledad (et al.)

Experimental Investigation of MgAl2O4 Spinel Formation in Oxidation of Al–Mg Alloys

Pages 460-464

Yoon, Young-Ok (et al.)

Impact of Dispersion Hardening by Alumina Nano Particles on Mechanical Properties of Al 1100

Pages 465-470

Zhukov, Ilya (et al.)

Investigation of Temperature Variation During Friction Drilling of 6082 and 7075 Al-Alloys

Pages 471-477

Hamzawy, Nadia (et al.)

Study on the Anti-EMF of Al-Er Master Alloy Prepared by Er2O3 as Erbium Source

Pages 478-482

Kang, Hongguang (et al.)

Comparison Between Different Laminated Aluminum Busbars Expansion Joints in Terms of Mechanical Performance and Relative Costs

Pages 485-494

Schneider, André Felipe (et al.)

Demo Retrofit Study of a Chinese Inspired Cell Technology

Pages 495-509

Dupuis, Marc (et al.)

Mass Transport by Waves on the Bath Metal Interface in Electrolysis Cell

Pages 510-516

Rakotondramanana, L. (et al.)

Numerical Investigation of Flow Field Effect on Ledge Shape in Aluminum Reduction Cell by Coupled Thermo-Flow Model

Pages 517-526

Zhang, Hongliang (et al.)

Study of Heat Distribution Due to ACD Variations for Anode Setting

Pages 527-534

Wong, Choon-Jie (et al.)

Anodic Incident Detection through Multivariate Analysis of Individual Anode Current Signals

Pages 535-542

LaJambe, David (et al.)

Fault Detection and Diagnosis of Alumina Feeding System Using Individual Anode Current Measurement

Pages 543-549

Yao, Yuchen (et al.)

Change of Anode Operation Pattern from Single to Double Staircase at Albras

Pages 550-555

Silva, Camila R. (et al.)

An Advanced Nonlinear Control Approach for Aluminum Reduction Process

Pages 556-565

Shi, Jing (et al.)

Model Based Approach for Online Monitoring of Aluminum Production Process

Pages 566-571

Silva Moreira, Lucas José (et al.)

Predictive Analytics for Enhancing Productivity of Reduction Cells

Pages 572-578

Rajgire, Shanmukh (et al.)

Restart of Shutdown Pots: Troubles, Solutions and Comparison with Normal Pots to Improve Results

Pages 579-590

Rai, Ved Prakash (et al.)

Electrochemical Behaviour of Cu-Al Oxygen-Evolving Anodes in Low-Temperature Fluoride Melts and Suspensions

Pages 591-599

Yasinskiy, Andrey S. (et al.)

Alumina Concentration Measurements in Cryolite Melts

Pages 600-607

Bracamonte, Luis (et al.)

The Influence of Polarisation on the Wetting of Graphite in Cryolite-Alumina Melts

Pages 608-619

Åsheim, Henrik (et al.)

Oxidation Study of Zinc Sulfite on the Removal of Sulfur Dioxide from Aluminum Electrolysis Flue Gas by Zinc Oxide

Pages 620-625

Cao, Xuejiao (et al.)

Electrolysis of Low-temperature Suspensions: An Update

Pages 626-636

Yasinskiy, Andrey (et al.)

Adapting Modern Industrial Operation Parameters in a Standardized Laboratory Cell for Measuring Current Efficiency for Aluminium Deposition: Unexpected Challenges and Lessons Learned

Pages 637-643

Meirbekova, R. (et al.)

Aluminium Smelter Crust—Phase Distribution and Structure Analysis of Top Zone Layer

Pages 644-652

Wei, Shanghai (et al.)

Influence of Anode Cover Material Particle Size Composition on Its Physical Property and Insulation Performance

Pages 653-658

Li, Changlin (et al.)

Lab Scale Experiments on Alumina Raft Formation

Pages 659-663

Gylver, Sindre Engzelius (et al.)

Mass- and Heat Transfer During Dissolution of Alumina

Pages 664-671

Solheim, Asbjørn (et al.)

The Rate of HF Formation During Addition of Alumina to NaF-AlF3 Melts

Pages 672-679

Osen, Karen S. (et al.)

Validation of the Gravimetric Method to Properly Follow Alumina Dissolution in Cryolitic Bath

Pages 680-687

Alarie, Jonathan (et al.)

Development of a Mathematical Model to Simulate Raft Formation

Pages 688-695

Roger, T. (et al.)

Efficient Alumina Handling

Pages 696-703

Paepcke, Jan (et al.)

Status Analysis of Particle Size Distribution and Attrition Index of the Smelter Grade Alumina

Pages 704-709

Yang, Youjian (et al.)

The Effect of Hard Scale Deposition on the Wall Heat Flux of a Cold Finger

Pages 710-718

Clos, Daniel Perez (et al.)

The Application of Intelligent Breaking and Feeding Technology for Aluminium Reduction Pot

Pages 719-725

Hong, Bo (et al.)

Reducing the Carbon Footprint: Aluminium Smelting with Changing Energy Systems and the Risk of Carbon Leakage

Pages 726-734

Saevarsdottir, Gudrun (et al.)

Measurement System for Fugitive Emissions in Primary Aluminium Electrolysis

Pages 735-743

Olsen Myklebust, Håkon Aleksander Hartvedt (et al.)

Validation of QCL CF4 Gas Analyzer for Sensitivity and Selectivity

Pages 744-750

Aarhaug, Thor Anders

A Laboratory Study of the HF Generation Potential of Particulate Fluorides from Cell Emissions

Pages 751-757

Hung, Jenny H. (et al.)

Method Development to Estimate Total Low Voltage and High Voltage PFC Emissions

Pages 758-765

Espinoza-Nava, Luis (et al.)

Update on SO2 Scrubbing Applied in Primary Aluminium Smelters

Pages 766-776

Broek, Stephan

Optimization of a Gas Treatment Center Equipped with Extended Surface Bag Filters

Pages 777-784

Dontigny, Julie (et al.)

Update on the Abart Gas Treatment and Alumina Handling at the Karmøy Technology Pilot

Pages 785-790

Sørhuus, Anders (et al.)

The Australian Energy Crisis, Its Impact on Domestic Aluminium Smelting and Potential Solutions

Pages 791-802

Wong, David S. (et al.)

Recycling of the Flue Gas from Aluminium Electrolysis Cells

Pages 803-810

Solheim, Asbjørn (et al.)

Utilization of Waste Heat for Pre-heating of Anodes

Pages 811-816

Grimstad, Martin (et al.)

Toward Minimizing the of Co-evolution of PFC Emission in EGA Smelter

Pages 817-826

Jassim, Ali (et al.)

Development and Application of GP500+ Energy Saving Aluminum Reduction Cell

Pages 827-834

Xie, Zhuojun (et al.)

Hands-Free Casting at AMAG Casting GmbH—It Is Possible!

Pages 837-843

Prillhofer, Bernd (et al.)

User-Friendly Surveillance Tools to Prevent Bleed-Out During Cast Start

Pages 844-851

Badowski, M. (et al.)

Beryllium Reduction Potential in AlMg Cast Alloys

Pages 852-859

Steglich, J. (et al.)

Accurate Real-Time Elemental (LIBS) Analysis of Molten Aluminum and Aluminum Alloys

Pages 860-864

Gudmundsson, Sveinn Hinrik (et al.)

Industrial Verification of Two Rotor Fluxing in Large Crucibles

Pages 865-867

Haugen, Terje (et al.)

Dynafeed: An Improved Crucible Transfer System

Pages 868-872

Tremblay, André (et al.)

Metal Transfer from Furnace to Furnace—A Case Study

Pages 873-878

Dion-Martin, Olivier (et al.)

Heavily Loaded Areas in Aluminum Melting Furnaces and Possible Refractory Solutions

Pages 879-886

Schemmel, Thomas (et al.)

Mold Shape Control for Direct Chill Ingot Casting

Pages 887-891

Cordill, Craig

Continuous Monitoring of Butt Curl Development During DC Casting—Development and Application

Pages 892-900

Droste, Werner Ewald (et al.)

Constellium’s Mould Technology for Al Alloy Slab DC Casting

Pages 901-908

Jarry, Ph. (et al.)

Fluid Flow Analyses and Meniscus Behavior During the Horizontal Single Belt Casting (HSBC) of Aluminum Alloy AA6111 Strips

Pages 909-916

Guthrie, Roderick (et al.)

Effect of Water Flow Distribution on the Performance of Aluminium Small-Form Ingot Chains

Pages 917-922

Pan, Lei (et al.)

Small Scale Oxidation Experiments on AlMg Alloys in Various Gas Fired Furnace Atmospheres

Pages 923-929

Johansson, A. (et al.)

Study of the Oxidation of an Al-5Mg Alloy in Various Industrial Melting Furnace Atmospheres

Pages 930-935

Lodin, Johannes (et al.)

Batscan™, Constellium In-melt Ultrasonic Inclusion Detector: Industrial Performance

Pages 936-943

Achard, Jean-Louis (et al.)

Benchmark and Practical Application of State of the Art Hydrogen Monitoring

Pages 944-950

Pelss, A. (et al.)

Molten Aluminum Quality Evaluations for Thin Foil Products

Pages 951-958

Doğan, Çisem (et al.)

Industrial Verification of One- and Two-Chamber Siphon Degassing

Pages 959-962

Håkonsen, Arild (et al.)

Evaluation of CFF and BPF in Pilot Scale Filtration Tests

Pages 963-971

Syvertsen, M. (et al.)

Dynaprime Filtration Technology Experience at Alcoa Baie-Comeau

Pages 972-980

Caron, Francis (et al.)

Improving Ultrasonic Melt Treatment Efficiency Through Flow Management: Acoustic Pressure Measurements and Numerical Simulations

Pages 981-987

Subroto, Tungky (et al.)

Impact of TiB2 Particle Size Distribution on Grain Refining Effectiveness

Pages 988-993

Minagawa, Akihiro

Effect of Nucleant Particle Size Distribution on the Grain Refining Efficiency of 7xxx Alloys

Pages 994-999

Salloum-Abou-Jaoude, G. (et al.)

Impact of Transition-Metal Elements on Grain Refiner Performance in AA6061

Pages 1000-1006

Tindall, Elli (et al.)

Application Ultrasonic Technology Processing for Aluminum Treatment While Casting Slabs on Industrial Equipment of UC RUSAL

Pages 1007-1012

Kostin, I. V. (et al.)

Influence of Liquid Jet Stirring and In-Situ Homogenization on the Intermetallics Formation During DC Casting of a 6xxx Al Alloy Rolling Ingot

Pages 1013-1018

Kumar, S. (et al.)

Digital Manufacturing for Foundries 4.0

Pages 1019-1025

Saxena, Prateek (et al.)

Integrating Fluid Simulation with Virtual Die Casting Machine for Industry 4.0 and Operator Training

Pages 1026-1031

Moreland, John (et al.)

Numerical Simulation of Wire Rod Casting of AA1370 and AA6101 Alloys

Pages 1032-1038

Lindholm, Dag (et al.)

Influence of Nozzle Shape on Near-Surface Segregation Formation During Twin-Roll Casting of Aluminum Strips

Pages 1039-1044

Grydin, Olexandr (et al.)

Effect of Ultrasonic Treatment on the Eutectic Phase and Cu Content in the Al Matrix of Large-Scale 2219 Al Alloy Ingot

Pages 1045-1051

Zhang, Li (et al.)

Influence of Alloying Additives on the Electrochemical Behavior of Cast Al-5Zn Alloys

Pages 1052-1055

Moussa, Mohamed Eissa (et al.)

Thermal Analysis and Microstructure of Al-12%Si-2.5%Cu-0.4%Mg Cast Alloy with Ce and/or La Rare Earth Metals

Pages 1056-1062

Tash, Mahmoud (et al.)

Numerical Simulation of Temperature Field in 6061 Aluminum Alloy Vertical Twin-Roll Casting Process

Pages 1063-1070

Xie, Chaopan (et al.)

Constellium R&D Approach in Recycling, From Lab to Industrial Scale

Pages 1073-1082

Pichat, A. (et al.)

Representative Sampling, Fractionation and Melting of Al-Scrap

Pages 1083-1090

Wibner, Stefan (et al.)

Recycling of Aluminium from Mixed Household Waste

Pages 1091-1100

Eggen, Sigvart (et al.)

An Assessment of Recyclability of Used Aluminium Coffee Capsules

Pages 1101-1109

Gökelma, Mertol (et al.)

Fractional Solidification for Purification of Recycled Aluminium Alloys

Pages 1110-1118

Venditti, Susanna (et al.)

A Rapid Method of Determining Salt Flux Melting Point and Composition

Pages 1119-1127

Peterson, Ray D.

Recovery of Aluminium Metal Using Ultrasonic Technique and Production of Al–Si Hypereutectic Alloys from 6063 Alloy’s Black Dross Using Silicon Lumps and Flux

Pages 1128-1136

Taha, G. M. (et al.)

Automatic Skimming Procedure for Reducing Aluminium Losses and Maintaining the Uniform Quality of the Molten Metal

Pages 1137-1140

Kevorkijan, Varužan (et al.)

Evaluation of the Effect of CO2 Cover Gas on the Rate of Oxidation of an AlMgSi Alloy

Pages 1141-1147

Solem, Cathrine Kyung Won (et al.)

The Development of Anode Shape, Size and Assembly Designs—Past, Present and Future Needs

Pages 1151-1160

Welch, Barry J.

10 Years of Anode Research and Development: Alcoa and Université Laval Experience

Pages 1161-1162

Tessier, Jayson (et al.)

Carbon Anode Raw Materials—Where Is the Cutting Edge?

Pages 1163-1165

Edwards, Les

Solids Flow Considerations and Their Impact in Smelter Carbon Plant Operations and Product Quality

Pages 1166-1170

Pittenger, Brian H. (et al.)

How to Improve the Environmental Efficiency of the Hall-Heroult Process While Producing and Using Carbon Anodes

Pages 1171-1173

Koulumies, Antti (et al.)

Trends in Anode Carbon Production Projects

Pages 1174-1175

Santangelo, Derek

Development of a Soft Sensor for Detecting Overpitched Green Anodes

Pages 1176-1182

Paris, Adéline (et al.)

Diffusion Measurements of CO2 Within Carbon Anodes for Aluminium Smelting

Pages 1183-1188

Putri, Epma (et al.)

Testing of SERMA Technology on Industrial Anodes for Quality Control for Aluminum Production

Pages 1189-1195

Kocaefe, Yasar (et al.)

Modelling of Gas Injection on Anode Baking Furnace and Application to Operations

Pages 1196-1202

Besson, Sandra (et al.)

Higher Baking and Production Levels in Anode Baking Furnaces and Associated Challenges

Pages 1203-1209

Ali, SyedArif (et al.)

Major Reconstruction of Central Casing of Open Top Baking Furnace with a View to Increase Its Lifespan and Reduce the Total Costs Comparing to Full Reconstruction

Pages 1210-1217

Zarganis, Christos (et al.)

Regulation and Management of Anode Baking Furnace Production Cycle During Green Anode Crisis

Pages 1218-1224

Samal, Kalpataru (et al.)

Sustainable Spent Pot Line Management Guidance

Pages 1225-1230

Nunez, Pernelle

Purification of Graphite by Thermal Vacuum Treatment of Spent Potlining

Pages 1231-1236

Sundby, Kristin (et al.)

The LCL&L Process: A Sustainable Solution for the Treatment and Recycling of Spent Pot Lining

Pages 1237-1242

Birry, Laurent (et al.)

Experimental Study on the Collecting Agent for Spent Potlining Flotation Index Optimization

Pages 1243-1250

Li, Nan (et al.)

Environmental Benefits of Using Spent Pot Lining (SPL) in Cement Production

Pages 1251-1260

Jawi, Mohammad Al (et al.)

Characteristic Analysis of Hazardous Waste from Aluminum Reduction Industry

Pages 1261-1266

Xie, Mingzhuang (et al.)

Energy Saving in Hall–Héroult Cell by Optimization of Anode Assembly Design

Pages 1267-1277

Shamroukh, Abdul-Mageed M. (et al.)

High Temperature Creep Behaviour of Carbon-Based Cathode Material for Aluminum Electrolysis

Pages 1278-1282

Wang, Wei (et al.)

Redesigning of Current Carrying Conductor—The Energy Reduction Initiative in Low Amperage Hall-Héroult Cell

Pages 1283-1290

Rai, Ved Prakash (et al.)

Ready-to-Use Cathodes for the Hall-Héroult Process

Pages 1291-1298

Pfeffer, Markus (et al.)

Mechanism Understanding of Sodium Penetration into Anthracite Cathodes: A Perspective from Diffusion Coefficients

Pages 1299-1308

Li, Jiaqi (et al.)

Anhydrous Carbon Pellets—An Engineered CPC Raw Material

Pages 1309-1318

Edwards, Les (et al.)

Influence of Particle Shape and Porosity on the Bulk Density of Anode Grade Petroleum Coke

Pages 1319-1326

Cannova, Frank (et al.)

An EXAFS and XANES Study of V, Ni, and Fe Speciation in Cokes for Anodes Used in Aluminum Production

Pages 1327-1328

Jahrsengene, Gøril (et al.)

Additive Selection for Coal Tar Pitch Modification in Aluminium Industry

Pages 1329-1337

Bureau, Julie (et al.)

Charcoal and Use of Green Binder for Use in Carbon Anodes in the Aluminium Industry

Pages 1338-1347

Sommerseth, Camilla (et al.)

Correction to: Effect of Concentrations and Pressures of CO2 on Calcification–Carbonation Treatment of Bauxite Residue

Pages C1-C1

Chao, Xi (et al.)