Logo - springer
Slogan - springer

Materials - Surfaces, Interfaces, Thin Films, Corrosion, Coatings | Journal of Coatings Technology and Research

We’re working on a new version of this journal site - preview it now
Journal of Coatings Technology and Research

Journal of Coatings Technology and Research

Editor-in-Chief: Mark Nichols

ISSN: 1547-0091 (print version)

Journal no. 11998

Instructions for Authors

Journal of Coatings Technology and Research

General 

Manuscripts submitted to this journal must not be under simultaneous consideration by any other publisher and should not have been published elsewhere in substantially similar form. No part of a paper which has been published by JCTR may be reproduced or published elsewhere without the written permission of the publisher.

Online Manuscript Submission 

Authors must submit their manuscripts online.Please connect directly to the site and upload all of your manuscript files following the instructions given on the screen.

Classes of Papers Considered for Publication 

JCTR welcomes for review original articles that advance the state of knowledge of the science and technology of functional, protective and decorative surface coatings, the materials comprising such coatings, and their manufacture, use, properties and performance. The surface coatings of particular interest include, but are not limited to, paints, inks and related coatings and their raw materials.
JCTR welcomes for review original articles that advance the state of knowledge of the science and technology of functional, protective and decorative surface coatings, the materials comprising such coatings, and their manufacture, use, properties and performance. The surface coatings of particular interest include, but are not limited to, paints, inks and related coatings and their raw materials.
The following classes of papers can be submitted to the journal:
RESEARCH papers describing original fundamental and applied investigations of the chemistry, physics, materials science, and related engineering studies relevant to surface coatings;
APPLICATIONS papers emphasizing the use of experimental methods for the solution of significant technological problems in the design, formulation, manufacture, application, use and performance of surface coatings;
REVIEW articles providing broad, critical overviews of current and emerging advances in coatings science;
SHORT COMMUNICATIONS for publication of significant original research results of limited scope (notes) or of immediate importance and impact (letters).
Authors submitting review articles or short communications should designate them as such in a cover letter.
Papers in which proprietary products or processes are promoted for commercial purposes are specifically not acceptable for publication in JCTR. Manuscripts focused principally on commercial practice, business and manufacturing features, and related topics should be submitted to the member journal of American Coatings Association: JCT COATINGSTECH for consideration. Please consult ACA Editorial Office of the journal for further information on submissions for the member journal.

General Requirements 

Submit the full author name, job title, address, phone, fax and email for all authors listed on the paper. Indicate which of the authors is to receive all communications regarding the paper including author queries and proofs.
The title of the paper should be explicit, descriptive and concise. A short abstract of 150 to 200 words, indicating the object and scope of the paper as well as the results achieved, should appear on the first page. Please also include three to five keywords, and please insert page numbers on your manuscript. Headings and subheadings should be used throughout the text to divide the subject matter into its important, logical parts. Typical headings include: Introduction, Experimental Methods and Materials, Results, Discussion, Conclusions, Acknowledgments, Appendixes and References.
Metric units are used in the journal. The International System of Units (SI Units) is the only acceptable system. If it is desired to give measurements in English units, or other non-standard or non-SI units, such values may be included in parentheses following the SI values and units. Authors are directed to refer to ‘Standard Number E 380’ of the American Society for Testing and Materials for a complete description of the SI Units. Authors are also required to follow spelling conventions of American English, rather than British English, e.g. color (not colour), analyze (not analyse).

Illustrations 

Figures should be sharp, noise-free, and of good contrast. We regret that we cannot provide drafting or art service. Each figure should be mentioned in the text and numbered consecutively using Arabic numerals. All lettering should be large enough to permit legible reduction. Suggested figure formats are TIFF, GIF, EPS, PPT and Postscript. Files should be at least 300 dpi. Graphs and their captions should be essentially self-explanatory.
Color figures will be accommodated only at editorial discretion and only when required to convey the technical content of illustrations, as for example in presentation of micrographs that cannot be properly rendered in gray scale. In general, line drawings will be printed in black and white, and authors should appropriately differentiate data points and curves by shape rather than color on such figures. Figures not meeting these requirements will be returned to the author(s) for appropriate revision.
Figures and illustrations may appear in color in the online version of the journal at no extra charge to the author. Color figures for inclusion in either or both the print version and the online version of the journal need to be submitted with the final version of the paper. Authors may be charged for color figures in the printed version of the journal.

References 

References should appear in a separate bibliography at the end of the paper, double-spaced, with items referred to by numerals and in order of appearance in the text. References in the text should be denoted by superscript numbers, e.g. 12. References should be complete, in the styles exemplified below:
(Book) Satas, D, Handbook of Pressure Sensitive Adhesive Technology. Van Nostrand Reinhold, New York (1989)
(Chapter in an Edited Book) Storti, G, Morbidelli, M, “Open-Loop Control of Polymerization Reactors.” In: Asua, JM (ed.) Polymer Dispersions. Principles and Applications, pp. 25-26. Kluwer Academic Publishers, Dordrecht (1997)
(Journal Article) Davidson, RS, “The Photodegradation of Some Naturally Occurring Polymers.” J. Photochem. Photobiol., B: Biology, 33 (1) 3-25 (1996)
(Conference Proceedings) Nguyen, T, Gu, X, Van Landingham, MR, Byrd, E, Martin, D, Ryntz, R, Martin, JW, “Degradation Modes of Polymeric Coatings Exposed to UV.” Proc. Coatings for Plastics Symposium, Troy, MI, July 2004
(Patent) Sarin, VK, Mulpuri, RP, “Chemical Vapor Deposition of Mullite Coatings.” US Patent 5,763,008, 1998

Submission of Revised Manuscripts 

Authors are required to incorporate changes to their articles resulting from technical review using a change-tracking feature, such as the Track Changes option under the Review menu in MS Word.

Proofing 

Please be sure to include your e-mail address on your paper. If your paper is accepted, we will provide proofs electronically. The proofread copy should be returned to the Publisher within 48 hours. Your cooperation is appreciated.

Copyright 

It is the policy of the American Coatings Association to own the copyright of all contributions they publish. To comply with U.S. Copyright Law, authors are required to sign a copyright transfer form before publication. This form returns to authors and their employers full rights to reuse their material for their own purposes. Authors must submit a signed copy of this form with their manuscript.

For Non-native English Speakers 

Manuscripts accepted for publication will be checked by copyeditors for spelling and formal style. For some papers, where English is not the author’s native language, substantial modification by an editor fluent in the author’s native language would be required. Bearing this in mind, authors unsure of their written English proficiency are strongly urged to have their manuscript edited by a native speaker prior to submission. Prospective articles in clear, grammatically correct English will help the technical editors and reviewers concentrate on the scientific content of the paper and thus smooth the peer review process.
The following editing service provides English language editing for scientific articles in all areas in which Springer publishes:
Edanz English editing for scientists
http://edantzediting.com/springer
Use of an editing service is neither a requirement nor a guarantee of acceptance for publication. However, the editors strongly encourage non-native English language authors to consider using an editing service, as an imprecise description of a process or result in an article submitted for consideration may result in rejection, unnecessary suggested revision, or delay.
Please contact the editing service directly to make arrangements for editing and payment.

English Language Editing 

For editors and reviewers to accurately assess the work presented in your manuscript you need to ensure the English language is of sufficient quality to be understood. If you need help with writing in English you should consider:
  • Asking a colleague who is a native English speaker to review your manuscript for clarity.
  • Visiting the English language tutorial which covers the common mistakes when writing in English.
  • Using a professional language editing service where editors will improve the English to ensure that your meaning is clear and identify problems that require your review. Two such services are provided by our affiliates Nature Research Editing Service and American Journal Experts. Springer authors are entitled to a 10% discount on their first submission to either of these services, simply follow the links below.
Please note that the use of a language editing service is not a requirement for publication in this journal and does not imply or guarantee that the article will be selected for peer review or accepted.
If your manuscript is accepted it will be checked by our copyeditors for spelling and formal style before publication.

.

为便于编辑和评审专家准确评估您稿件中陈述的研究工作,您需要确保您的英语语言质量足以令人理解。如果您需要英文写作方面的帮助,您可以考虑:
● 请一位以英语为母语的同事审核您的稿件是否表意清晰。
● 查看一些有关英语写作中常见语言错误的教程。
● 使用专业语言编辑服务,编辑人员会对英语进行润色,以确保您的意思表达清晰,并识别需要您复核的问题。我们的附属机构 Nature Research Editing Service 和合作伙伴 American Journal Experts 即可提供此类服务。
请注意,使用语言编辑服务并非在期刊上发表文章的必要条件,同时也并不意味或保证文章将被选中进行同行评议或被接受。
如果您的稿件被接受,在发表之前,我们的文字编辑会检查您的文稿拼写是否规范以及文体是否正式。

.

エディターと査読者があなたの論文を正しく評価するには、使用されている英語の質が十分に高いことが必要とされます。英語での論文執筆に際してサポートが必要な場合には、次のオプションがあります:
・英語を母国語とする同僚に、原稿で使用されている英語が明確であるかをチェックしてもらう。
・英語で執筆する際のよくある間違いに関する英語のチュートリアルを参照する。
・プロの英文校正サービスを利用する。校正者が原稿の意味を明確にしたり、問題点を指摘し、英語の質を向上させます。Nature Research Editing Service とAmerican Journal Experts の2つは弊社と提携しているサービスです。Springer の著者は、いずれのサービスも初めて利用する際には10%の割引を受けることができます。以下のリンクを参照ください。
英文校正サービスの利用は、投稿先のジャーナルに掲載されるための条件ではないこと、また論文審査や受理を保証するものではないことに留意してください。
原稿が受理されると、出版前に弊社のコピーエディターがスペルと体裁のチェックを行います。

.

영어 원고의 경우, 에디터 및 리뷰어들이 귀하의 원고에 실린 결과물을 정확하게 평가할 수 있도록, 그들이 충분히 이해할 수 있을 만한 수준으로 작성되어야 합니다. 만약 영작문과 관련하여 도움을 받기를 원하신다면 다음의 사항들을 고려하여 주십시오:
• 귀하의 원고의 표현을 명확히 해줄 영어 원어민 동료를 찾아서 리뷰를 의뢰합니다.
• 영어 튜토리얼 페이지에 방문하여 영어로 글을 쓸 때 자주하는 실수들을 확인합니다.
• 리뷰에 대비하여, 원고의 의미를 명확하게 해주고 리뷰에서 요구하는 문제점들을 식별해서 영문 수준을 향상시켜주는 전문 영문 교정 서비스를 이용합니다. Nature Research Editing Service와 American Journal Experts에서 저희와 협약을 통해 서비스를 제공하고 있습니다. Springer 저자들이 본 교정 서비스를 첫 논문 투고를 위해 사용하시는 경우 10%의 할인이 적용되며, 아래의 링크를 통하여 확인이 가능합니다.
영문 교정 서비스는 게재를 위한 요구사항은 아니며, 해당 서비스의 이용이 피어 리뷰에 논문이 선택되거나 게재가 수락되는 것을 의미하거나 보장하지 않습니다.
원고가 수락될 경우, 출판 전 저희측 편집자에 의해 원고의 철자 및 문체를 검수하는 과정을 거치게 됩니다.

PDF Reprints 

The contact author is entitled to receive 25 free downloadable PDF reprints of the published paper. Additional PDFs as well as print reprints may be ordered through the reprint order forms provided with the proofs.

Read this Journal on Springerlink

For authors and editors


  • Journal Citation Reports®
    2018 Impact Factor
  • 1.584
  • Aims and Scope

    Aims and Scope

    Close

    Journal of Coatings Technology and Research (JCTR) is published by Springer under license from and in cooperation with the American Coatings Association (ACA). JCTR is a forum for the exchange of original research, experience, knowledge and ideas among those with a professional interest in the science, technology and manufacture of functional, protective and decorative coatings including, but not limited to, paints, inks and related coatings and their raw materials.

    The following classes of papers can be submitted to the journal:

    RESEARCH papers describing original fundamental and applied investigations of the chemistry, physics, materials science, and related engineering studies relevant to surface coatings;

    APPLICATIONS papers emphasizing the use of experimental methods for the solution of significant technological problems in the design, formulation, manufacture, application, use and performance of surface coatings;

    REVIEW articles providing broad, critical overviews of current and emerging advances in coatings science;

    BRIEF COMMUNICATIONS for publication of significant original research results of limited scope (notes) or of immediate importance and impact (letters).

    Authors submitting review articles or brief communications should designate them as such in a cover letter.

    Papers in which proprietary products or processes are promoted for commercial purposes are specifically not acceptable for publication in JCTR. Manuscripts focused principally on commercial practice, business and manufacturing features, and related topics should be submitted to the member journals of ACA, JCT CoatingsTech for consideration. Please consult the ACA Editorial Offices of the journal for further information on submissions for the member journals.

    To obtain a copy of the Journal of Coatings Technology and Research Guidelines for Authors, visit www.springerlink.com.

  • Submit Online
  • Open Choice - Your Way to Open Access
  • Instructions for Authors

    Instructions for Authors

    Close

  • Author Academy: Training for Authors

Alerts for this journal

 

Get the table of contents of every new issue published in Journal of Coatings Technology and Research.