Logo - springer
Slogan - springer

Materials - Characterization & Evaluation of Materials | Refractories and Industrial Ceramics (Editorial Board)

We’re working on a new version of this journal site - preview it now
Refractories and Industrial Ceramics

Refractories and Industrial Ceramics

Editor-in-Chief: Ivan D. Kashcheev

ISSN: 1083-4877 (print version)
ISSN: 1573-9139 (electronic version)

Journal no. 11148

151,50 € Personal Rate e-only
Get Subscription

Online subscription, valid from January through December of current calendar year

Immediate access to this year's issues via SpringerLink

1 Volume(-s) with 6 issue(-s) per annual subscription

Automatic annual renewal

More information: >> FAQs // >> Policy


Kashcheev I.D.  The Ural Federal University, Yekaterinburg, Russia

Deputy Editor-in-Chief :

Aksel'rod L.M. Magnezit Group, Moscow, Russia

Editorial Board

Christos G. Aneziris, TU Bergakademie Freiberg, Germany

Belen'kii  A. M.,  National University of Science and Technology MISIS, Moscow, Russia

Belyakov A. V.,  Mendeleyev University of Chemical Technology of Russia, Moscow, Russia

Davydov S. Ya., Ural State Mining University, Yekaterinburg, Russia

Doroganov V. A., Shukhov Belgorod State Technological University, Belgorod, Russia

Filonov M. R., National University of Science and Technology MISIS, Moscow, Russia

Fomichev M. S.,  «EVRAZ-NTMK», Sverdlovsk region, Nizhny Tagil, Russia

Garten V.,VGH AG, Germany

Gorbanenko V. M.,  Keralit LLC, Moscow, Russia

Gorohovskii A. M.,  JSC «Pervouralsk Silica Plant» (JSC «Dinur»). Sverdlovsk Region, Pervouralsk, Russia

Gorohovskii A. V., Yuri Gagarin State University of Saratov, Saratov, Russia

Grishpun E. M.,JSC «Pervouralsk Silica Plant» (JSC «Dinur»). Sverdlovsk Region, Pervouralsk, Russia

Kalenda A. V., JSC «EVRAZ-ZSMK», Kemerovo region, Novokuznetsk, Russia

Krasovitskii Y. V.,  Voronezh State University of Engineering Technologies, Voronezh, Russia

Kuznetsov D. V., National University of Science and Technology MISIS, Moscow, Russia

Kurunov I. F.,  Blast Furnace JSC «NLMK», Lipetsk, Russia

Lebedev Yu. N.,  JSC «Sukhoy Log Refractory Plant». Sverdlovsk region, Sukhoy Log, Russia

Lukin E. S., Mendeleyev University of Chemical Technology of Russia, Moscow, Russia

Martynenko V. V., Berezhnoy Ukrainian Research Institute of Refractories , Kharkov, Ukraine

Mozhzherin V. A., JSC «Borvichi Refractories Plant», Novgorod Region, Borovichi, Russia

Odegov S. Yu.,   Magnezit Group, Moscow, Russia

Perepelitsyn V. A.,  Ural Federal University, Yekaterinburg, Russia

Pivinskii Yu. E., «NVF KERAMBET-OGNEUPOR» LLC, St. Petersburg, Russia

Pyrikov A. N., LLC «OgneuporTradeGroup», Moscow, Russia

Semchenko G. D., National Technical University «Kharkov Polytechnic Institute», Kharkov, Ukraine

Sheshukov O. Yu., Institute of Metallurgy of the Ural Branch of the Russian Academy of Sciences, Yekaterinburg, Russia

Shevchik A. P.,  St. Petersburg State Technological Institute, St. Petersburg, Russia

Shubin V. I., « Cemclub Company» LCC, Moscow, Russia

Sokolov V. A., TSIT SPETSKEROKOM LLC, Moscow, Russia

Sokov V. N.,  National Research University «Moscow State University of Civil Engineering», Moscow, Russia

Soskovets O. N.,  Russian Union of Commodity Producers, Moscow, Russia

Stolin A. M.,  Institute of Structural Macrokinetics and Materials Science of the Russian Academy of Sciences. Moscow Region, Chernogolovka, Russia

Stonis R. Vilnius, Gediminas Technical University, Vilnius, Lithuania

Suvorov S. A., St. Petersburg State Technological Institute, St. Petersburg, Russia

Suzdal'tsev E. I. , JSP ORPE «TECHNOLOGIYA», Kaluga Region, Obninsk, Russia

Tarasovskii V.P., «Bakor» R&D Centre, Moscow, Russia

Vereshchagin V. I.,  National Research Tomsk Polytechnic University, Tomsk, Russia

Visloguzova E. A., Ural Federal University, Yekaterinburg, Russia

Voronina O. B.,  LLC «TPP Ferrocomplex», Krasnogorsk, Moscow Region, Russia

Wohrmeyer Ch., Kerneos GmbH, Germany

Yurkov A. V., Bogdanovich JSC «Ogneupory», Sverdlovsk region, Bogdanovich,  Russia

Refractories and Industrial Ceramics is an English translation of selected articles from Novye Ogneupory (New Refractories)

Authors and referees, please contact the Editor-in-Chief, Dr I.D. Kashcheev at: ognemet@misis.ru   /  ogneupor@imet.ru

For other enquiries, please contact the Publishing Editor

Read this Journal on Springerlink

For authors and editors

  • Journal Citation Reports®
    2018 Impact Factor
  • 0.522
  • Aims and Scope

    Aims and Scope


    Refractories and Industrial Ceramics publishes peer-reviewed articles on the latest developments and discoveries in the field of refractory materials and ceramics, focusing on the practical aspects of their production and use.

    Topics covered include:
    • Scientific Research;
    • Raw Materials;
    • Production;
    • Equipment;
    • Heat Engineering;
    • Applications.
    The Russian language source for this publication is the journal: Novye Ogneupory (New Refractories). Editor: S.V. Kolpakov.

    The Russian journal is published monthly. The English journal Refractories and Industrial Ceramics is published bimonthly. Prior to the 1996 volume-year Refractories and Industrial Ceramics was entitled Refractories.

    The Russian Volume Year is published in English from April.

  • Instructions for Authors

    Instructions for Authors


  • Resources for Journal Authors
  • Author Academy: Training for Authors
  • Copyright Information

    Copyright Information


    Copyright Information

    For Authors

    Submission of a manuscript implies: that the work described has not been published before (except in form of an abstract or as part of a published lecture, review or thesis); that it is not under consideration for publication elsewhere; that its publication has been approved by all co-authors, if any, as well as – tacitly or explicitly – by the responsible authorities at the institution where the work was carried out.

    Author warrants (i) that he/she is the sole owner or has been authorized by any additional copyright owner to assign the right, (ii) that the article does not infringe any third party rights and no license from or payments to a third party is required to publish the article and (iii) that the article has not been previously published or licensed. The author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. Transfer of copyright to Springer (respective to owner if other than Springer) becomes effective if and when a Copyright Transfer Statement is signed or transferred electronically by the corresponding author. After submission of the Copyright Transfer Statement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted by Springer.

    The copyright to this article, including any graphic elements therein (e.g. illustrations, charts, moving images), is assigned for good and valuable consideration to Springer effective if and when the article is accepted for publication and to the extent assignable if assignability is restricted for by applicable law or regulations (e.g. for U.S. government or crown employees).

    The copyright assignment includes without limitation the exclusive, assignable and sublicensable right, unlimited in time and territory, to reproduce, publish, distribute, transmit, make available and store the article, including abstracts thereof, in all forms of media of expression now known or developed in the future, including pre- and reprints, translations, photographic reproductions and microform. Springer may use the article in whole or in part in electronic form, such as use in databases or data networks for display, print or download to stationary or portable devices. This includes interactive and multimedia use and the right to alter the article to the extent necessary for such use.

    Authors may self-archive the Author's accepted manuscript of their articles on their own websites. Authors may also deposit this version of the article in any repository, provided it is only made publicly available 12 months after official publication or later. He/she may not use the publisher's version (the final article), which is posted on SpringerLink and other Springer websites, for the purpose of self-archiving or deposit. Furthermore, the Author may only post his/her version provided acknowledgement is given to the original source of publication and a link is inserted to the published article on Springer's website. The link must be accompanied by the following text: "The final publication is available at link.springer.com".

    Prior versions of the article published on non-commercial pre-print servers like arXiv.org can remain on these servers and/or can be updated with Author's accepted version. The final published version (in pdf or html/xml format) cannot be used for this purpose. Acknowledgement needs to be given to the final publication and a link must be inserted to the published article on Springer's website, accompanied by the text "The final publication is available at link.springer.com". Author retains the right to use his/her article for his/her further scientific career by including the final published journal article in other publications such as dissertations and postdoctoral qualifications provided acknowledgement is given to the original source of publication.

    Author is requested to use the appropriate DOI for the article. Articles disseminated via link.springer.com are indexed, abstracted and referenced by many abstracting and information services, bibliographic networks, subscription agencies, library networks, and consortia.

    For Readers

    While the advice and information in this journal is believed to be true and accurate at the date of its publication, neither the authors, the editors, nor the publisher can accept any legal responsibility for any errors or omissions that may have been made. The publisher makes no warranty, express or implied, with respect to the material contained herein.

    All articles published in this journal are protected by copyright, which covers the exclusive rights to reproduce and distribute the article (e.g., as offprints), as well as all translation rights. No material published in this journal may be reproduced photographically or stored on microfilm, in electronic data bases, video disks, etc., without first obtaining written permission from the publisher (respective the copyright owner if other than Springer). The use of general descriptive names, trade names, trademarks, etc., in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.

    Springer has partnered with Copyright Clearance Center's RightsLink service to offer a variety of options for reusing Springer content. For permission to reuse our content please locate the material that you wish to use on link.springer.com or on springerimages.com and click on the permissions link or go to copyright.com, then enter the title of the publication that you wish to use. For assistance in placing a permission request, Copyright Clearance Center can be connected directly via phone: +1-855-239-3415, fax: +1-978-646-8600, or e-mail: info@copyright.com.

    © Springer Science+Business Media New York

Alerts for this journal


Get the table of contents of every new issue published in Refractories and Industrial Ceramics.