Logo - springer
Slogan - springer

Life Sciences - Plant Sciences | Folia Geobotanica

We’re working on a new version of this journal site - preview it now
Folia Geobotanica

Folia Geobotanica

Journal of the Institute of Botany, Academy of Sciences of the Czech Republic

Editor-in-Chief: P. Dostál; P. Koutecký

ISSN: 1211-9520 (print version)
ISSN: 1874-9348 (electronic version)

Journal no. 12224

76,25 € Personal Rate e-only
Get Subscription

Online subscription, valid from January through December of current calendar year

Immediate access to this year's issues via SpringerLink

1 Volume(-s) with 4 issue(-s) per annual subscription

Automatic annual renewal

More information: >> FAQs // >> Policy

Folia Geobotanica

Instructions for authors

Article Types 

Before submitting a paper, it is advised to browse a few previous journal issues to check the general journal scope. There are four main types of papers:
Research papers
Forum papers
Opinion papers
Review papers
Technical reports
Original research papers present original investigations that offer new insights in the fields of plant ecology, vegetation science and plant taxonomy and biosystematics. They form the core of the journal. Even long papers are considered as original research papers provided they are of sufficient general interest and their length is justified by contents. The journal publishes both observational and experimental papers. Theoretical and methodological soundness is a condition for acceptance; papers presenting data without further interpretation are not accepted. Syntaxonomical papers are published only if they are of interest to more general readership, e.g., if they contain methodological novelties or synoptic treatments across larger regions. Descriptions of new taxa (species and below) should be based on the sufficient amount of material and properly justified using advanced methods of plant taxonomy. They should be accompanied by an illustration (line drawing) clearly showing the diagnostic characters, comparison with related taxa in a dichotomous key or table, as well as by discussion of the diagnostic characters, ecology, geography, or reproductive biology. Descriptions of new taxa are welcome, but only if given as part of a thorough systematic study based on a sufficient amount of plant material and original data. Pure descriptions based on only a few herbarium specimens and/or without sound data cannot be considered.
Forum papers are discussion papers that raise important topics of broader interest. They are shorter (typically not exceeding 4000 words) and may use lighter style. If they raise a topic that is likely to stimulate wider discussion, the editors may solicit other papers to comment on the issue to form a special forum issue; all papers are then typically published in one journal issue. Proposals for forum issues should be submitted to one of the Editors-in-Chief.
Opinion papers are papers where authors share their opinions on current questions in ecology or plant systematics and associated methodological issues. These papers are shorter (typically not exceeding 4000 words) and may use lighter style.
The review papers bring critical overview of state of the art of the topic in the fields of plant ecology and systematics. Structure of the manuscript is free and depends on message. Length of the text is not restricted but should be justified by content.
The aim of technical reports is to inform about new databases, techniques and approaches, or computer programs in the fields of plant ecology and systematics. The reports should be concise, with the main body of the text (without Abstract and References) usually not exceeding 2000 words, and with Abstract up to 200 words.
Suggested structure of the database reports (taxonomic, life-history traits, vegetation, etc.) is as follows: i) purpose, ii) description of the data stored including history of the database, geographic region, number of items stored, vegetation types or taxonomic groups included, iii) technical structure of the database describing data storage and their retrieval, iv) database accessibility and conditions of using the data and v) outline of potential applications.
Technical reports are processed by a peer-review procedure as regular papers. Editors and reviewers will also check the functionality of the databases/computer programs. Databases with a small geographical/taxonomic coverage, very limited amount of data stored, low accessibility by scientific community, minor scientific relevance, or with major flaws are unlikely to be published in FG.
Occasionally, Special issues may be published on various topics in plant ecology, and plant systematics. The journal will therefore consider proposals for special issues resulting from conferences or workshops in the field. Proposals for Special issues should be submitted to one of the Editors-in-Chief.

Manuscript submission 

Legal requirements
Submission of a manuscript implies: that the work described has not been published before; that it is not under consideration for publication anywhere else; that its publication has been approved by all co-authors, if any, as well as by the responsible authorities – tacitly or explicitly – at the institute where the work has been carried out. The publisher will not be held legally responsible should there be any claims for compensation.
Permissions
Authors wishing to include figures, tables, or text passages that have already been published elsewhere are required to obtain permission from the copyright owner(s) and to include evidence that such permission has been granted when submitting their papers. Any material received without such evidence will be assumed to originate from the authors.
How to submit
Authors should submit their manuscripts online. Electronic submission substantially reduces the editorial processing and reviewing times and shortens overall publication times. Please connect directly to the site and upload all of your manuscript files following the instructions given on the screen.
Papers should have line numbering.

Manuscript preparation 

Title page
The title page should include:
- The name(s) of the author(s)
- A concise and informative title
- The affiliation(s) and address(es) of the author(s)
- The e-mail address, telephone and fax numbers of the corresponding author
Abstract
Please provide an unstructured abstract of 150 to 250 words which should clearly state purpose (the main purposes and research questions), methods, results and conclusions of the paper.
Keywords
Please provide 4 to 6 keywords which can be used for indexing purposes.
Text
Text formatting
For submission in Word
• Use a normal, plain font (e.g., 10-point Times Roman) for text.
• Use italics for emphasis.
• Use the automatic page numbering function to number the pages.
• Do not use field functions.
• Use tab stops or other commands for indents, not the space bar.
• Use the table function, not spreadsheets, to make tables.
• Use the equation editor or MathType for equations.
Note: If you use Word 2007, do not create the equations with the default equation editor but use MathType instead.
• Save your file in two formats: doc and rtf. Do not submit docx files.

Heading levels, numbering 

Please use no more than three levels of displayed headings.
Abbreviations and acronyms
Abbreviations should be defined at first mention and used consistently thereafter.
SI units, numbers
Please always use internationally accepted signs and symbols for units, SI units.
Terminology
Genus and species names should be in italics. The common names of animals should not be capitalized.
Equations
Please use the standard mathematical notation for formulae, symbols etc.:
• Italic for single letters that denote mathematical constants, variables, and unknown quantities
• Roman/upright for numerals, operators, and punctuation, and commonly defined functions or abbreviations, e.g., cos, det, e or exp, lim, log, max, min, sin, tan, d (for derivative)
• Bold for vectors, tensors, and matrices.
Footnotes
Footnotes on the title page are not given reference symbols. Footnotes to the text are numbered consecutively; those to tables should be indicated by superscript lower-case letters (or asterisks for significance values and other statistical data).
Acknowledgments
Acknowledgments of people, grants, funds, etc. should be placed in a separate section before the reference list. The names of funding organizations should be written in full.
Ethical standards
Conflict of interest
Please include at the end of the acknowledgements a declaration that the experiments comply with the current laws of the country in which they were performed
References
The list of References should only include works that are cited in the text and that have been published or accepted for publication. Personal communications and unpublished works should only be mentioned in the text. Do not use footnotes or endnotes as a substitute for a reference list.
Citation in text
Cite references in the text by name and year in parentheses, ordered chronologically. Some examples:
o Negotiation research spans many disciplines (Thompson 1990).
o This result was later contradicted (Becker and Seligman 1996).
o This effect has been widely studied (Abbott 1991; Medvec et al. 1993; Barakat et al. 1995; Kelso and Smith 1998).
List style
Reference list entries should be alphabetized by the last names of the first author of each work.
For examples go to: "Style of references" on the right-hand side.
For standardization of formats, authors are requested to adhere to the following: in Literature Cited, use of abbreviations of journals contained in B-P-H (G H. M. Lawrence, A. F. G. Buchheim, G. S. Daniels and H. Dolezal, eds., 1968, Botanico-Periodicum-Huntianum, Hunt Botanical Library, Pittsburgh), including Supplementum; (G. D. R. Bridson and E. R. Smith, eds., 1991, B-P-H/S, Hunt Institute for Botanical Documentation, Pittsburgh) Titles and standard abbreviations can be checked at http://www.ipni.org/
Tables
• All tables are to be numbered using Arabic numerals.
• Tables should always be cited in text in consecutive numerical order.
• For each table, please supply a table heading. The table title should explain clearly and concisely the components of the table.
• Identify any previously published material by giving the original source in the form of a reference at the end of the table heading.
• Footnotes to tables should be indicated by superscript lower-case letters (or asterisks for significance values and other statistical data) and included beneath the table body.
Figures
• All figures are to be numbered using Arabic numerals.
• Figure parts should be denoted by lowercase letters.
• Figures should always be cited in text in consecutive numerical order.
• For each figure, please supply a figure caption.
• Make sure to identify all elements found in the figure in the caption.
• Identify any previously published material by giving the original source in the form of a reference at the end of the caption.
• For more information about preparing your illustrations, please follow the hyperlink to the artwork instructions on the right.
ESM
If Electronic supplementary material (ESM) is submitted, it will be published as received from the author in the online version only.
ESM may consist of
• information that cannot be printed: animations, video clips, sound recordings
• information that is more convenient in electronic form: sequences, spectral data, etc.
• large original data, e.g. additional tables, illustrations, etc.
• If supplying any ESM, the text must make specific mention of the material as a citation, similar to that of figures and tables (e.g., “. . . as shown in Animation 3.”).
• For details on formats and other information, please follow the hyperlink to the specific instructions for electronic supplementary material on the right.

Artwork and Illustrations Guidelines 

Electronic Figure Submission

  • Supply all figures electronically.
  • Indicate what graphics program was used to create the artwork.
  • For vector graphics, the preferred format is EPS; for halftones, please use TIFF format. MSOffice files are also acceptable.
  • Vector graphics containing fonts must have the fonts embedded in the files.
  • Name your figure files with "Fig" and the figure number, e.g., Fig1.eps.

Line Art

Line BW
  • Definition: Black and white graphic with no shading.
  • Do not use faint lines and/or lettering and check that all lines and lettering within the figures are legible at final size.
  • All lines should be at least 0.1 mm (0.3 pt) wide.
  • Scanned line drawings and line drawings in bitmap format should have a minimum resolution of 1200 dpi.
  • Vector graphics containing fonts must have the fonts embedded in the files.

Halftone Art

Halftone gray color
  • Definition: Photographs, drawings, or paintings with fine shading, etc.
  • If any magnification is used in the photographs, indicate this by using scale bars within the figures themselves.
  • Halftones should have a minimum resolution of 300 dpi.

Combination Art

Combined
  • Definition: a combination of halftone and line art, e.g., halftones containing line drawing, extensive lettering, color diagrams, etc.
  • Combination artwork should have a minimum resolution of 600 dpi.

Color Art

  • Color art is free of charge for online publication.
  • If black and white will be shown in the print version, make sure that the main information will still be visible. Many colors are not distinguishable from one another when converted to black and white. A simple way to check this is to make a xerographic copy to see if the necessary distinctions between the different colors are still apparent.
  • If the figures will be printed in black and white, do not refer to color in the captions.
  • Color illustrations should be submitted as RGB (8 bits per channel).

Figure Lettering

  • To add lettering, it is best to use Helvetica or Arial (sans serif fonts).
  • Keep lettering consistently sized throughout your final-sized artwork, usually about 2–3 mm (8–12 pt).
  • Variance of type size within an illustration should be minimal, e.g., do not use 8-pt type on an axis and 20-pt type for the axis label.
  • Avoid effects such as shading, outline letters, etc.
  • Do not include titles or captions within your illustrations.

Figure Numbering

  • All figures are to be numbered using Arabic numerals.
  • Figures should always be cited in text in consecutive numerical order.
  • Figure parts should be denoted by lowercase letters (a, b, c, etc.).
  • If an appendix appears in your article and it contains one or more figures, continue the consecutive numbering of the main text. Do not number the appendix figures,
    "A1, A2, A3, etc." Figures in online appendices (Electronic Supplementary Material) should, however, be numbered separately.

Figure Captions

  • Each figure should have a concise caption describing accurately what the figure depicts. Include the captions in the text file of the manuscript, not in the figure file.
  • Figure captions begin with the term Fig. in bold type, followed by the figure number, also in bold type.
  • No punctuation is to be included after the number, nor is any punctuation to be placed at the end of the caption.
  • Identify all elements found in the figure in the figure caption; and use boxes, circles, etc., as coordinate points in graphs.
  • Identify previously published material by giving the original source in the form of a reference citation at the end of the figure caption.

Figure Placement and Size

  • Figures should be submitted separately from the text, if possible.
  • When preparing your figures, size figures to fit in the column width.
  • For large-sized journals the figures should be 84 mm (for double-column text areas), or 174 mm (for single-column text areas) wide and not higher than 234 mm.
  • For small-sized journals, the figures should be 119 mm wide and not higher than 195 mm.

Permissions

If you include figures that have already been published elsewhere, you must obtain permission from the copyright owner(s) for both the print and online format. Please be aware that some publishers do not grant electronic rights for free and that Springer will not be able to refund any costs that may have occurred to receive these permissions. In such cases, material from other sources should be used.

Accessibility

In order to give people of all abilities and disabilities access to the content of your figures, please make sure that
  • All figures have descriptive captions (blind users could then use a text-to-speech software or a text-to-Braille hardware)
  • Patterns are used instead of or in addition to colors for conveying information (colorblind users would then be able to distinguish the visual elements)
  • Any figure lettering has a contrast ratio of at least 4.5:1

Electronic Supplementary Material 

Springer accepts electronic multimedia files (animations, movies, audio, etc.) and other supplementary files to be published online along with an article or a book chapter. This feature can add dimension to the author's article, as certain information cannot be printed or is more convenient in electronic form.
Before submitting research datasets as electronic supplementary material, authors should read the journal’s Research data policy. We encourage research data to be archived in data repositories wherever possible.

Submission

  • Supply all supplementary material in standard file formats.
  • Please include in each file the following information: article title, journal name, author names; affiliation and e-mail address of the corresponding author.
  • To accommodate user downloads, please keep in mind that larger-sized files may require very long download times and that some users may experience other problems during downloading.

Audio, Video, and Animations

  • Aspect ratio: 16:9 or 4:3
  • Maximum file size: 25 GB
  • Minimum video duration: 1 sec
  • Supported file formats: avi, wmv, mp4, mov, m2p, mp2, mpg, mpeg, flv, mxf, mts, m4v, 3gp

Text and Presentations

  • Submit your material in PDF format; .doc or .ppt files are not suitable for long-term viability.
  • A collection of figures may also be combined in a PDF file.

Spreadsheets

  • Spreadsheets should be submitted as .csv or .xlsx files (MS Excel).

Specialized Formats

  • Specialized format such as .pdb (chemical), .wrl (VRML), .nb (Mathematica notebook), and .tex can also be supplied.

Collecting Multiple Files

  • It is possible to collect multiple files in a .zip or .gz file.

Numbering

  • If supplying any supplementary material, the text must make specific mention of the material as a citation, similar to that of figures and tables.
  • Refer to the supplementary files as “Online Resource”, e.g., "... as shown in the animation (Online Resource 3)", “... additional data are given in Online Resource 4”.
  • Name the files consecutively, e.g. “ESM_3.mpg”, “ESM_4.pdf”.

Captions

  • For each supplementary material, please supply a concise caption describing the content of the file.

Processing of supplementary files

  • Electronic supplementary material will be published as received from the author without any conversion, editing, or reformatting.

Accessibility

In order to give people of all abilities and disabilities access to the content of your supplementary files, please make sure that
  • The manuscript contains a descriptive caption for each supplementary material
  • Video files do not contain anything that flashes more than three times per second (so that users prone to seizures caused by such effects are not put at risk)

Ethical Responsibilities of Authors 

This journal is committed to upholding the integrity of the scientific record. As a member of the Committee on Publication Ethics (COPE) the journal will follow the COPE guidelines on how to deal with potential acts of misconduct.
Authors should refrain from misrepresenting research results which could damage the trust in the journal, the professionalism of scientific authorship, and ultimately the entire scientific endeavour. Maintaining integrity of the research and its presentation is helped by following the rules of good scientific practice, which include*:
  • The manuscript should not be submitted to more than one journal for simultaneous consideration.
  • The submitted work should be original and should not have been published elsewhere in any form or language (partially or in full), unless the new work concerns an expansion of previous work. (Please provide transparency on the re-use of material to avoid the concerns about text-recycling (‘self-plagiarism’).
  • A single study should not be split up into several parts to increase the quantity of submissions and submitted to various journals or to one journal over time (i.e. ‘salami-slicing/publishing’).
  • Concurrent or secondary publication is sometimes justifiable, provided certain conditions are met. Examples include: translations or a manuscript that is intended for a different group of readers.
  • Results should be presented clearly, honestly, and without fabrication, falsification or inappropriate data manipulation (including image based manipulation). Authors should adhere to discipline-specific rules for acquiring, selecting and processing data.
  • No data, text, or theories by others are presented as if they were the author’s own (‘plagiarism’). Proper acknowledgements to other works must be given (this includes material that is closely copied (near verbatim), summarized and/or paraphrased), quotation marks (to indicate words taken from another source) are used for verbatim copying of material, and permissions secured for material that is copyrighted.
Important note: the journal may use software to screen for plagiarism.
  • Authors should make sure they have permissions for the use of software, questionnaires/(web) surveys and scales in their studies (if appropriate).
  • Authors should avoid untrue statements about an entity (who can be an individual person or a company) or descriptions of their behavior or actions that could potentially be seen as personal attacks or allegations about that person.
  • Research that may be misapplied to pose a threat to public health or national security should be clearly identified in the manuscript (e.g. dual use of research). Examples include creation of harmful consequences of biological agents or toxins, disruption of immunity of vaccines, unusual hazards in the use of chemicals, weaponization of research/technology (amongst others).
  • Authors are strongly advised to ensure the author group, the Corresponding Author, and the order of authors are all correct at submission. Adding and/or deleting authors during the revision stages is generally not permitted, but in some cases may be warranted. Reasons for changes in authorship should be explained in detail. Please note that changes to authorship cannot be made after acceptance of a manuscript.
*All of the above are guidelines and authors need to make sure to respect third parties rights such as copyright and/or moral rights.
Upon request authors should be prepared to send relevant documentation or data in order to verify the validity of the results presented. This could be in the form of raw data, samples, records, etc. Sensitive information in the form of confidential or proprietary data is excluded.
If there is suspicion of misbehavior or alleged fraud the Journal and/or Publisher will carry out an investigation following COPE guidelines. If, after investigation, there are valid concerns, the author(s) concerned will be contacted under their given e-mail address and given an opportunity to address the issue. Depending on the situation, this may result in the Journal’s and/or Publisher’s implementation of the following measures, including, but not limited to:
  • If the manuscript is still under consideration, it may be rejected and returned to the author.
  • If the article has already been published online, depending on the nature and severity of the infraction:
    - an erratum/correction may be placed with the article
    - an expression of concern may be placed with the article
    - or in severe cases retraction of the article may occur.
The reason will be given in the published erratum/correction, expression of concern or retraction note. Please note that retraction means that the article is maintained on the platform, watermarked “retracted” and the explanation for the retraction is provided in a note linked to the watermarked article.
  • The author’s institution may be informed
  • A notice of suspected transgression of ethical standards in the peer review system may be included as part of the author’s and article’s bibliographic record.

Fundamental errors

Authors have an obligation to correct mistakes once they discover a significant error or inaccuracy in their published article. The author(s) is/are requested to contact the journal and explain in what sense the error is impacting the article. A decision on how to correct the literature will depend on the nature of the error. This may be a correction or retraction. The retraction note should provide transparency which parts of the article are impacted by the error.

Suggesting / excluding reviewers

Authors are welcome to suggest suitable reviewers and/or request the exclusion of certain individuals when they submit their manuscripts. When suggesting reviewers, authors should make sure they are totally independent and not connected to the work in any way. It is strongly recommended to suggest a mix of reviewers from different countries and different institutions. When suggesting reviewers, the Corresponding Author must provide an institutional email address for each suggested reviewer, or, if this is not possible to include other means of verifying the identity such as a link to a personal homepage, a link to the publication record or a researcher or author ID in the submission letter. Please note that the Journal may not use the suggestions, but suggestions are appreciated and may help facilitate the peer review process.

Authorship principles 

These guidelines describe authorship principles and good authorship practices to which prospective authors should adhere to.

Authorship clarified

The Journal and Publisher assume all authors agreed with the content and that all gave explicit consent to submit and that they obtained consent from the responsible authorities at the institute/organization where the work has been carried out, before the work is submitted.
The Publisher does not prescribe the kinds of contributions that warrant authorship. It is recommended that authors adhere to the guidelines for authorship that are applicable in their specific research field. In absence of specific guidelines it is recommended to adhere to the following guidelines*:
All authors whose names appear on the submission
1) made substantial contributions to the conception or design of the work; or the acquisition, analysis, or interpretation of data; or the creation of new software used in the work;
2) drafted the work or revised it critically for important intellectual content;
3) approved the version to be published; and
4) agree to be accountable for all aspects of the work in ensuring that questions related to the accuracy or integrity of any part of the work are appropriately investigated and resolved.
* Based on/adapted from:

Disclosures and declarations

All authors are requested to include information regarding sources of funding, financial or non-financial interests, study-specific approval by the appropriate ethics committee for research involving humans and/or animals, informed consent if the research involved human participants, and a statement on welfare of animals if the research involved animals (as appropriate).
The decision whether such information should be included is not only dependent on the scope of the journal, but also the scope of the article. Work submitted for publication may have implications for public health or general welfare and in those cases it is the responsibility of all authors to include the appropriate disclosures and declarations.

Data transparency

All authors are requested to make sure that all data and materials as well as software application or custom code support their published claims and comply with field standards. Please note that journals may have individual policies on (sharing) research data in concordance with disciplinary norms and expectations. Please check the Instructions for Authors of the Journal that you are submitting to for specific instructions.

Role of the Corresponding Author

One author is assigned as Corresponding Author and acts on behalf of all co-authors and ensures that questions related to the accuracy or integrity of any part of the work are appropriately addressed.
The Corresponding Author is responsible for the following requirements:
  • ensuring that all listed authors have approved the manuscript before submission, including the names and order of authors;
  • managing all communication between the Journal and all co-authors, before and after publication;*
  • providing transparency on re-use of material and mention any unpublished material (for example manuscripts in press) included in the manuscript in a cover letter to the Editor;
  • making sure disclosures, declarations and transparency on data statements from all authors are included in the manuscript as appropriate (see above).
* The requirement of managing all communication between the journal and all co-authors during submission and proofing may be delegated to a Contact or Submitting Author. In this case please make sure the Corresponding Author is clearly indicated in the manuscript.

Author contributions

Please check the Instructions for Authors of the Journal that you are submitting to for specific instructions regarding contribution statements.
In absence of specific instructions and in research fields where it is possible to describe discrete efforts, the Publisher recommends authors to include contribution statements in the work that specifies the contribution of every author in order to promote transparency. These contributions should be listed at the separate title page.
Examples of such statement(s) are shown below:
• Free text:
All authors contributed to the study conception and design. Material preparation, data collection and analysis were performed by [full name], [full name] and [full name]. The first draft of the manuscript was written by [full name] and all authors commented on previous versions of the manuscript. All authors read and approved the final manuscript.
• Conceptualization: [full name], …; Methodology: [full name], …; Formal analysis and investigation: [full name], …; Writing - original draft preparation: [full name, …]; Writing - review and editing: [full name], …; Funding acquisition: [full name], …; Resources: [full name], …; Supervision: [full name],….
For review articles where discrete statements are less applicable a statement should be included who had the idea for the article, who performed the literature search and data analysis, and who drafted and/or critically revised the work.
For articles that are based primarily on the student’s dissertation or thesis, it is recommended that the student is usually listed as principal author:

Affiliation

The primary affiliation for each author should be the institution where the majority of their work was done. If an author has subsequently moved, the current address may additionally be stated. Addresses will not be updated or changed after publication of the article.

Changes to authorship

Authors are strongly advised to ensure the correct author group, the Corresponding Author, and the order of authors at submission. Changes of authorship by adding or deleting authors, and/or changes in Corresponding Author, and/or changes in the sequence of authors are not accepted after acceptance of a manuscript.
  • Please note that author names will be published exactly as they appear on the accepted submission!
Please make sure that the names of all authors are present and correctly spelled, and that addresses and affiliations are current.
Adding and/or deleting authors at revision stage are generally not permitted, but in some cases it may be warranted. Reasons for these changes in authorship should be explained. Approval of the change during revision is at the discretion of the Editor-in-Chief. Please note that journals may have individual policies on adding and/or deleting authors during revision stage.

Author identification

Authors are recommended to use their ORCID ID when submitting an article for consideration or acquire an ORCID ID via the submission process.

Deceased or incapacitated authors

For cases in which a co-author dies or is incapacitated during the writing, submission, or peer-review process, and the co-authors feel it is appropriate to include the author, co-authors should obtain approval from a (legal) representative which could be a direct relative.

Authorship issues or disputes

In the case of an authorship dispute during peer review or after acceptance and publication, the Journal will not be in a position to investigate or adjudicate. Authors will be asked to resolve the dispute themselves. If they are unable the Journal reserves the right to withdraw a manuscript from the editorial process or in case of a published paper raise the issue with the authors’ institution(s) and abide by its guidelines.

Confidentiality

Authors should treat all communication with the Journal as confidential which includes correspondence with direct representatives from the Journal such as Editors-in-Chief and/or Handling Editors and reviewers’ reports unless explicit consent has been received to share information.

Research Data Policy 

A submission to the journal implies that materials described in the manuscript, including all relevant raw data, will be freely available to any researcher wishing to use them for non-commercial purposes, without breaching participant confidentiality.
The journal strongly encourages that all datasets on which the conclusions of the paper rely should be available to readers. We encourage authors to ensure that their datasets are either deposited in publicly available repositories (where available and appropriate) or presented in the main manuscript or additional supporting files whenever possible. Please see Springer Nature’s information on recommended repositories.
General repositories - for all types of research data - such as figshare and Dryad may be used where appropriate.
Datasets that are assigned digital object identifiers (DOIs) by a data repository may be cited in the reference list. Data citations should include the minimum information recommended by DataCite: authors, title, publisher (repository name), identifier.
Where a widely established research community expectation for data archiving in public repositories exists, submission to a community-endorsed, public repository is mandatory. Persistent identifiers (such as DOIs and accession numbers) for relevant datasets must be provided in the paper
For the following types of data set, submission to a community-endorsed, public repository is mandatory:
Mandatory depositionSuitable repositories
Protein sequencesUniprot
DNA and RNA sequencesGenbank
DNA DataBank of Japan (DDBJ)
EMBL Nucleotide Sequence Database (ENA)
DNA and RNA sequencing dataNCBI Trace Archive
NCBI Sequence Read Archive (SRA)
Genetic polymorphismsdbSNP
dbVar
European Variation Archive (EVA)
Linked genotype and phenotype datadbGAP
The European Genome-phenome Archive (EGA)
Macromolecular structureWorldwide Protein Data Bank (wwPDB)
Biological Magnetic Resonance Data Bank (BMRB)
Electron Microscopy Data Bank (EMDB)
Microarray data (must be MIAME compliant)Gene Expression Omnibus (GEO)
ArrayExpress
Crystallographic data for small moleculesCambridge Structural Database

Data availability

The journal encourages authors to provide a statement of Data availability in their article. Data availability statements should include information on where data supporting the results reported in the article can be found, including, where applicable, hyperlinks to publicly archived datasets analysed or generated during the study. Data availability statements can also indicate whether data are available on request from the authors and where no data are available, if appropriate.
Data Availability statements can take one of the following forms (or a combination of more than one if required for multiple datasets):
  • 1. The datasets generated during and/or analysed during the current study are available in the [NAME] repository, [PERSISTENT WEB LINK TO DATASETS]
  • 2. The datasets generated during and/or analysed during the current study are not publicly available due [REASON WHY DATA ARE NOT PUBLIC] but are available from the corresponding author on reasonable request.
  • 3. The datasets generated during and/or analysed during the current study are available from the corresponding author on reasonable request.
  • 4. Data sharing not applicable to this article as no datasets were generated or analysed during the current study.
  • 5. All data generated or analysed during this study are included in this published article [and its supplementary information files].
More examples of template data availability statements, which include examples of openly available and restricted access datasets, are available:
This service provides advice on research data policy compliance and on finding research data repositories. It is independent of journal, book and conference proceedings editorial offices and does not advise on specific manuscripts.

Open Choice 

Open Choice allows you to publish open access in more than 1850 Springer Nature journals, making your research more visible and accessible immediately on publication.
Article processing charges (APCs) vary by journal – view the full list
Benefits:
  • Increased researcher engagement: Open Choice enables access by anyone with an internet connection, immediately on publication.
  • Higher visibility and impact: In Springer hybrid journals, OA articles are accessed 4 times more often on average, and cited 1.7 more times on average*.
  • Easy compliance with funder and institutional mandates: Many funders require open access publishing, and some take compliance into account when assessing future grant applications.
It is easy to find funding to support open access – please see our funding and support pages for more information.
*) Within the first three years of publication. Springer Nature hybrid journal OA impact analysis, 2018.

Copyright and license term – CC BY

Open Choice articles do not require transfer of copyright as the copyright remains with the author. In opting for open access, the author(s) agree to publish the article under the Creative Commons Attribution License.

English Language Editing 

For editors and reviewers to accurately assess the work presented in your manuscript you need to ensure the English language is of sufficient quality to be understood. If you need help with writing in English you should consider:
  • Asking a colleague who is a native English speaker to review your manuscript for clarity.
  • Visiting the English language tutorial which covers the common mistakes when writing in English.
  • Using a professional language editing service where editors will improve the English to ensure that your meaning is clear and identify problems that require your review. Two such services are provided by our affiliates Nature Research Editing Service and American Journal Experts. Springer authors are entitled to a 10% discount on their first submission to either of these services, simply follow the links below.
Please note that the use of a language editing service is not a requirement for publication in this journal and does not imply or guarantee that the article will be selected for peer review or accepted.
If your manuscript is accepted it will be checked by our copyeditors for spelling and formal style before publication.

.

为便于编辑和评审专家准确评估您稿件中陈述的研究工作,您需要确保您的英语语言质量足以令人理解。如果您需要英文写作方面的帮助,您可以考虑:
● 请一位以英语为母语的同事审核您的稿件是否表意清晰。
● 查看一些有关英语写作中常见语言错误的教程。
● 使用专业语言编辑服务,编辑人员会对英语进行润色,以确保您的意思表达清晰,并识别需要您复核的问题。我们的附属机构 Nature Research Editing Service 和合作伙伴 American Journal Experts 即可提供此类服务。
请注意,使用语言编辑服务并非在期刊上发表文章的必要条件,同时也并不意味或保证文章将被选中进行同行评议或被接受。
如果您的稿件被接受,在发表之前,我们的文字编辑会检查您的文稿拼写是否规范以及文体是否正式。

.

エディターと査読者があなたの論文を正しく評価するには、使用されている英語の質が十分に高いことが必要とされます。英語での論文執筆に際してサポートが必要な場合には、次のオプションがあります:
・英語を母国語とする同僚に、原稿で使用されている英語が明確であるかをチェックしてもらう。
・英語で執筆する際のよくある間違いに関する英語のチュートリアルを参照する。
・プロの英文校正サービスを利用する。校正者が原稿の意味を明確にしたり、問題点を指摘し、英語の質を向上させます。Nature Research Editing Service とAmerican Journal Experts の2つは弊社と提携しているサービスです。Springer の著者は、いずれのサービスも初めて利用する際には10%の割引を受けることができます。以下のリンクを参照ください。
英文校正サービスの利用は、投稿先のジャーナルに掲載されるための条件ではないこと、また論文審査や受理を保証するものではないことに留意してください。
原稿が受理されると、出版前に弊社のコピーエディターがスペルと体裁のチェックを行います。

.

영어 원고의 경우, 에디터 및 리뷰어들이 귀하의 원고에 실린 결과물을 정확하게 평가할 수 있도록, 그들이 충분히 이해할 수 있을 만한 수준으로 작성되어야 합니다. 만약 영작문과 관련하여 도움을 받기를 원하신다면 다음의 사항들을 고려하여 주십시오:
• 귀하의 원고의 표현을 명확히 해줄 영어 원어민 동료를 찾아서 리뷰를 의뢰합니다.
• 영어 튜토리얼 페이지에 방문하여 영어로 글을 쓸 때 자주하는 실수들을 확인합니다.
• 리뷰에 대비하여, 원고의 의미를 명확하게 해주고 리뷰에서 요구하는 문제점들을 식별해서 영문 수준을 향상시켜주는 전문 영문 교정 서비스를 이용합니다. Nature Research Editing Service와 American Journal Experts에서 저희와 협약을 통해 서비스를 제공하고 있습니다. Springer 저자들이 본 교정 서비스를 첫 논문 투고를 위해 사용하시는 경우 10%의 할인이 적용되며, 아래의 링크를 통하여 확인이 가능합니다.
영문 교정 서비스는 게재를 위한 요구사항은 아니며, 해당 서비스의 이용이 피어 리뷰에 논문이 선택되거나 게재가 수락되는 것을 의미하거나 보장하지 않습니다.
원고가 수락될 경우, 출판 전 저희측 편집자에 의해 원고의 철자 및 문체를 검수하는 과정을 거치게 됩니다.

For authors and editors


  • Journal Citation Reports®
    2018 Impact Factor
  • 1.046
  • Aims and Scope

    Aims and Scope

    Close

    Folia Geobotanica covers the broad topics of plant ecology, vegetation science and plant systematics, focusing primarily on plant species in a structured environment. In the area of plant ecology, Folia Geobotanica publishes papers that deal with population and community ecology, in particular when linked with environment response. Within plant systematics, the journal publishes papers on systematic and evolutionary botany, including phylogeny reconstructions, phylogeographic and biogeographic inferences, studies on microevolutionary processes, taxonomic studies, and broader taxonomic revisions. Apart from regular papers, the journal also publishes book reviews and Forum discussion papers that raise important topics of broader interest. Occasionally, Special issues may be published on various topics in plant ecology and plant systematic that often stem from activities at international conferences geared toward a specific problem. An international Editorial Board, and a well-developed review procedure help to guarantee the high quality of the papers published.

    Slavomil Hejný and Jaroslav Moravec established the journal in 1966 (under the name Folia Geobotanica & Phytotaxonomica), in what was then the Institute of Botany of the Czechoslovak Academy of Sciences. From 2008 it is published by Springer.

    Folia Geobotanica is co-published with the Institute of Botany, Academy of Sciences of the Czech Republic.

  • Submit Online
  • Open Choice - Your Way to Open Access
  • Special Issue - Call for Papers (pdf, 27...
  • Instructions for authors

    Folia Geobotanica

    Close

Alerts for this journal

 

Get the table of contents of every new issue published in Folia Geobotanica.