Overview
- Presents recent advancements in design and performance of biocomposites
- Discusses mechanical, thermal, rheological, gas barrier properties and dimensional stability of biocomposites
- Describes benefits and applications of biodegradable polymers derived from starch and cellulose, soybeans, etc
Part of the book series: Composites Science and Technology (CST)
Access this book
Tax calculation will be finalised at checkout
Other ways to access
Table of contents (12 chapters)
-
Front Matter
Keywords
- Biocomposite delamination damage
- fiber-based biocomposites
- Sugar palm bioplastic composites
- Green Biocomposites
- Novel bio-nanocomposites
- Biocomposite hydrothermal aging behaviors
- Biocomposite Manufacturing
- Lignocellulosic biocomposites
- Chicken feathers thermoplastic biocomposites
- Pineapple leaf fiber biocomposites
- Short kenaf fiber biocomposites
About this book
Editors and Affiliations
About the editors
Assoc. Prof. Ir. Ts. Dr. Mohamed Thariq Bin Haji Hameed Sultan is currently attached with Universiti Putra Malaysia as the Head of Biocomposite Technology Laboratory (BIOCOMPOSITE) Institute of Tropical Forestry and Forest Products (INTROP), UPM Serdang, Selangor, Malaysia. Being the Head of Biocomposite Technology Laboratory, he is also appointed as an Independent Scientific Advisor to Aerospace Malaysia Innovation Centre (AMIC) based in Cyberjaya, Selangor, Malaysia. He received his Ph.D. from the University of Sheffield, UK, and is a Professional Engineer (P.Eng.) registered under the Board of Engineers Malaysia (BEM), Professional Technologist (P.Tech.) registered under the Malaysian Board of Technologists and also a Chartered Engineer (C.Eng.) registered with the Institution of Mechanical Engineers UK. He has about 10 years of experience in teaching as well as in research. His area of research interests includes hybrid composites, advance materials, structural health monitoring and impact studies. So far, he has published more than 100 international journal papers, published 5 books internationally and received many awards locally and internationally. He was awarded as Leaders in Innovation Fellowship (LIF) by the Royal Academy of Engineering (Raeng), UK, in December 2017 and is also the Honourable Secretary of Malaysian Society of Structural Health Monitoring (MSSHM) based in UPM Serdang, Selangor, Malaysia. Currently, he is also attached to the Institution of Engineers Malaysia (IEM) as the Chairman in the Engineering Education Technical Division (E2TD). He was also appointed as Panel Evaluator for Engineering Accreditation Council Malaysia (EAC) and Engineering Technology Accreditation Council (ETAC).]
Ir. Dr Mohd Shukry Abdul Majid is an Associate Professor at the School of Mechatronic Engineering, Universiti Malaysia Perlis. He received his Bachelor of Engineering in Mechanical Engineeringfrom the University Manchester Institute of Science and Technology (UMIST) in 2001. Upon his return to Malaysia, he worked as a research and development (R&D) Engineer at a semiconductor industry before joining Universiti Malaysia Perlis (UniMAP) as a Lecturer in 2004. He completed his M.Sc. in Mechanical Systems Engineering from the University of Liverpool in 2005 and his Ph.D. in Composite Engineering from Newcastle University, UK, in 2011. An advocate of interdisciplinary research, his research interests are composite piping, looking at the performance of composite structures, NDE’s of composites and natural fibre/green composites, hybrid reinforced/filled polymer composites, lignocellulosic reinforced/filled polymer and biodegradable composites. He has authored 149 Scopus indexed publications with 32 publications in ISI-ranked journals. Ir. Dr Mohd Shukry has been honoured with numerous local and international awards for his achievements including ITEX, MTE and PECIPTA, and is the first recipient from Technical University Network (MTUN) to have been awarded Malaysia’s Research Star Award 2017, as one of Malaysia’s most promising and influential researchers by the Ministry of High Education Malaysia (MOHE).
Ir. Dr Mohd Ridzuan Mohd Jamir is currently working as a Senior Lecturer at Universiti Malaysia Perlis (UniMAP), Arau, Perlis. He received his Ph.D. from Universiti Malaysia Perlis (UniMAP) Malaysia, and his M.Eng. and B.Eng. from Universiti Teknologi Malaysia (UTM), Johor Baharu, Malaysia. His area of research interests is in studying natural fibre composites and looking at the performance of composite structures and tribological properties, hybrid reinforced/filled polymer composites, lignocellulosic reinforced/filled polymer and biodegradable composites. So far, he has more than 80 research articles in renowned international journals, proceedings and review papers and serves as a reviewer for several reputable high-impact ISI journals and international conferences.
Dr. Azwan Iskandar Azmi is currently working as a Senior Lecturer at Universiti Malaysia Perlis (UniMAP), Malaysia. He received his bachelor’s degree in Mechanical Engineering from Purdue University, USA, and master’s degree in Advanced Manufacturing Technology from Universiti Teknologi Malaysia. He completed his doctoral study at the University of Auckland, New Zealand, in Mechanical Engineering in 2012 and has more than 10 years of experience in teaching, research, and industries. His area of research interests includes machining and machinability of carbon, glass, and their hybrid composites, as well as difficult-to-cut metal alloys such as titanium, Inconel, and nickel-titanium (NiTi) alloys. So far, he has more than 100 research articles in renowned international journals, proceedings and review papers, and serves as a reviewer for several reputable high-impact ISI journals and international conferences.
Bibliographic Information
Book Title: Biocomposite Materials
Book Subtitle: Design and Mechanical Properties Characterization
Editors: Mohamed Thariq Hameed Sultan, Mohd Shukry Abdul Majid, Mohd Ridzuan Mohd Jamir, Azwan Iskandar Azmi, Naheed Saba
Series Title: Composites Science and Technology
DOI: https://doi.org/10.1007/978-981-33-4091-6
Publisher: Springer Singapore
eBook Packages: Chemistry and Materials Science, Chemistry and Material Science (R0)
Copyright Information: Springer Nature Singapore Pte Ltd. 2021
Hardcover ISBN: 978-981-33-4090-9Published: 26 January 2021
Softcover ISBN: 978-981-33-4093-0Published: 27 January 2022
eBook ISBN: 978-981-33-4091-6Published: 25 January 2021
Series ISSN: 2662-1819
Series E-ISSN: 2662-1827
Edition Number: 1
Number of Pages: XI, 340
Number of Illustrations: 42 b/w illustrations, 113 illustrations in colour
Topics: Ceramics, Glass, Composites, Natural Materials, Materials Engineering, Biomaterials, Characterization and Evaluation of Materials