Skip to main content
Log in
Metallography, Microstructure, and Analysis

Application and Innovation for Metals, Alloys, and Engineered Materials

Publishing model:

Metallography, Microstructure, and Analysis - Free Editor's Choice Articles

2023

Evolution of L12 Ordered Precipitates in Cu–Fe–Si Alloy System and Its Influence on Potential Strength–Conductivity Properties (this opens in a new tab)

In Situ Alloying through Laser-Powder Bed Fusion of a 60%Inconel718-40%Cu Powders Mixture (this opens in a new tab)

Nano-Dimensional Elements in the Structure of Zinc Subjected to KOBO Extrusion (this opens in a new tab)

Investigation of Anisotropic Properties of Al 5052 Alloy Deformed by Cryorolling and Cryo-cross Rolling (this opens in a new tab)

Microstructural Analysis and Integrity of Drilling Surfaces on Titanium Alloy (Ti–6Al–4V) Using Heat-Sink-Based Cryogenic Cooling (this opens in a new tab)

Alternative Reagent for Revealing the Entire Microstructure of Additive Manufactured Ti–6Al–4V Alloy (this opens in a new tab)

2022

Microstructural Development in Inconel 718 Nickel-Based Superalloy Additively Manufactured by Laser Powder Bed Fusion (this opens in a new tab)

Effect of Casting Thickness on the Solidification Characteristics and Microstructural Parameters of Near-Eutectic Al-Si Alloy Produced by Ablation Casting Process (this opens in a new tab)

Comparative Study of Microstructure and Properties of Hypoeutectic Al-Si Alloys Being Cast With and Without Melt Thermal Treatment (this opens in a new tab)

Precipitation Characteristics of HPVDC AlSi10Mg0.3Mn Alloy Under Different Temper Conditions (this opens in a new tab)

Effect of Cooling Rate on Phase Transformation Kinetics and Microstructure of Nb–Ti Microalloyed Low Carbon HSLA Steel (this opens in a new tab)

Recrystallization, Grain Growth, and Color Etching to Design an Artistic Microstructure in Cartridge Brass (C26000) (this opens in a new tab)

2021

Microstructure Evolution and Thermal Stability of AZ31 Alloy Deformed by Multi-Pass DSR (this opens in a new tab)

Microstructural Evaluation of Copper Brazed Joints Using Silver-Based Filler Metal (this opens in a new tab)

Development of an Oxidation Contrast Method for Pearlite Colony Revelation in Eutectoid Steels (this opens in a new tab)

Microstructure and Mechanical Properties of Nb-API X70 Low Carbon Steel (this opens in a new tab)

EBSD Analysis of Blocky Structures in Hardened and Tempered Microstructures of a 5 wt.% Cr Cold Work Tool Steel (this opens in a new tab)

Effect of Strain Rate on Mechanical Behavior and Microstructure Evolution of Ti-Based T110 Alloy (this opens in a new tab)

2020

Effect of Niobium Addition on Microstructure and Mechanical Properties of Fe–7Al–0.35C Low-Density Steel (this opens in a new tab)

Phase Transformations in γ-Aluminide, Ti–46.5Al–xNb–yCr–zMo–0.3B (x = 3.5, 5; y, z = 0, 1, 2; y + z = 2) Alloys (this opens in a new tab)

Substructure Formation, Texture, and Mechanical Behavior of Warm Rolled 2205-Type Duplex Stainless Steel (this opens in a new tab)

Segmentation of Lath-Like Structures via Localized Identification of Directionality in a Complex-Phase Steel (this opens in a new tab)

The Nineteenth-Century Molyneux’s Boat: Archaeometallurgical Perspective of its Metal Fastenings (this opens in a new tab)

Microstructure and Tensile Properties of Cost-Efficient Thermally Hardenable α + β Alloys of Ti–Al–Mo–Fe and Ti–Al–Mo–Cr Systems (this opens in a new tab)
 

2019

Metallographic Studies of Dissimilar Al-Cu Laser-Welded Joints Using Various Etchants (this opens in a new tab)

Effects of Plastic Stress on Transformation Plasticity and Microstructure of a Carbide-Free Bainite Steel (this opens in a new tab)

EBSD Analysis of the Primary Austenite Grains in Lamellar Graphite Cast Iron (this opens in a new tab)

Effect of Cooling Rate on the Microstructure of a Pressure Vessel Steel (this opens in a new tab)

Visualization and Observation of Morphological Peculiarities of Twin Formation in Mg-Based Samples After Electrically Assisted Forming (this opens in a new tab)

2018

Bainite Transformation Characteristics of High-Si Hypereutectoid Bearing Steel (this opens in a new tab)

A Metallographic Review of 3D Printing/Additive Manufacturing of Metal and Alloy Products and Components (this opens in a new tab)

Effect of Hot Isostatic Pressing and Powder Feedstock on Porosity, Microstructure, and Mechanical Properties of Selective Laser Melted AlSi10Mg (this opens in a new tab)

Graphite Formation and Dissolution in Ductile Irons and Steels Having High Silicon Contents: Solid-State Transformations (this opens in a new tab)

Oxidation Behavior of Tungsten Carbide-6% Cobalt Cemented Carbide (this opens in a new tab)
 

2017

Application of Color Metallography to Study the Microstructure of Friction Stir-Welded Dual-Phase Brass Using Various Etchants (this opens in a new tab)

On the Precipitation of Intermetallic Compounds in Selected Solid-Solution-Strengthened Ni-Base Alloys and Their Effects on Mechanical Properties (this opens in a new tab)

Determination of Mo-Rich Laves-Phase in Weld Metals of a Creep-Resistant 9% Cr-Steel Using Light Optical Microscopy (this opens in a new tab)

Industrial Sintering Response and Microstructural Characterization of Aluminum Powder Metallurgy Alloy Alumix 123 (this opens in a new tab)

Delineation of Prior Austenite Grain Boundaries in a Low-Alloy High-Performance Steel (this opens in a new tab)

2016

A two-tilt analysis of electron-diffraction patterns from transition-iron-carbide precipitates formed during tempering of 4340 steel (this opens in a new tab)

Quantification of Dendritic Austenite After Interrupted Solidification in a Hypoeutectic Lamellar Graphite Iron (this opens in a new tab)

A Comparative Study on Tensile and Fracture Behavior of Al–Mg Alloy Processed Through Cryorolling and Cryo Groove Rolling (this opens in a new tab)

Qualifying Electrically Conductive Cold Embedding-Media for Scanning Electron Microscopy (this opens in a new tab)

Hot Forging of IN718 with Solution-Treated and Delta-Containing Initial Microstructures (this opens in a new tab)

2015

Study of Coarsening in γ′ Precipitates by Diffusion Couples (this opens in a new tab)

Microstructure and Mechanical Properties of a TRIP-Aided Martensitic Steel (this opens in a new tab)

Microstructure and Carburization Detection in HP Alloy Pyrolysis Tubes (this opens in a new tab)

The Brass Nails of the Akko Tower Wreck (Israel): Archaeometallurgical Analyses (this opens in a new tab)

Microstructure Characterization of Single and Multipass 13Cr4Ni Steel Welded Joints (this opens in a new tab)
 

Navigation