Metals and Materials International - Editor's Choice Articles of 2023
Anti-Corrosion Coatings for Protecting Nb-Based Alloys Exposed to Oxidation Environments: A Review (this opens in a new tab) (Yingyi Zhang et al.)
Importance of Microstructural Features in Bimodal Structure–Property Linkage (this opens in a new tab) (Yongju Kim et al.)
Fundamental Study on the Development of Pure Magnesium Parts by Additive Manufacturing: An Experimental and Computational Analysis (this opens in a new tab) (Bandar AlMangour et al.)
Influence of Annealing on Microstructure and Tribological Properties of AlCoCrFeNiTi High Entropy Alloy Based Coating (this opens in a new tab) (Himanshu Kumar et al.)
Effect of Powder Bed Fusion Process Parameters on Microstructural and Mechanical Properties of FeCrNi MEA: An Atomistic Study (this opens in a new tab) (Ishat Raihan Jamil et al.)
Data-Driven Modelling of Complex Current–Voltage Waveform Controlled Gas Metal Arc-Wire DED Processes (this opens in a new tab) (Nagaraj Pradeep et al.)
Microstructure and Mechanical Properties of Severely Deformed Eutectic Al–Si–Cu–Mn Alloy (this opens in a new tab) (Yasin Alemdag et al.)
Characteristics of the Cold-Rolled Multi-Phase Cr30Fe30Ni15Co10Cu10Ti5 High-Entropy Alloy (this opens in a new tab) (Ahad Rezaee et al.)
Direct Laser Deposition of Austenitic and Martensitic Steel Gradient Layers (this opens in a new tab) (R. V. Mendagaliev et al.)
Microstructure Evolution and Mechanical Properties of Ultra-Fine Grain AlCrFe2Ni2Wx High-Entropy Alloys (this opens in a new tab) (Shougang Duan et al.)
Temperature-Dependent Yield Strength of Nanoprecipitate-Strengthened Face-Centered Cubic High Entropy Alloys: Prediction and Analysis (this opens in a new tab) (Ziyuan Zhao et al.)
A Method for Measuring Plastic Strain Ratio Over a Wide Strain Range Using the Digital Image Correlation Technology (this opens in a new tab) (Gang Hee Gu et al.)
Application of Artificial Neural Network to Predict the Crystallite Size and Lattice Strain of CoCrFeMnNi High Entropy Alloy Prepared by Powder Metallurgy (this opens in a new tab) (Cheenepalli Nagarjuna et al.)
Bimetallic Structure of Ti6Al4V/IN718 with CuSi Interlayer for Wire-Arc Directed Energy Deposition Process (this opens in a new tab) (Avinash Mishra et al.)
Investigation of Cracking Susceptibility and Porosity Formation and Its Mitigation Techniques in Laser Powder Bed Fusion of Al 7075 Alloy (this opens in a new tab) (Mayank Patel et al.)
Laser Powder Bed Fusion Additive Manufacturing of Recycled Zircaloy-4 (this opens in a new tab) (Soung Yeoul Ahn et al.)
High Temperature Deformation Behavior and Processing Maps of FeCoNiCrAlTi Dual Phase High Entropy Alloy (this opens in a new tab) (Piyush Kumar et al.)
Optimal Process Conditions for Powder Bed Fusion and Analysis of Properties of Maraging Steel (this opens in a new tab) (A. Ra Jo et al.)
Oxidation Behavior of CoCrFeMnNi High-Entropy Alloy Fabricated by Selective Laser Melting (this opens in a new tab) (Xiquan Jia et al.)
Densification, Microstructural, and Mechanical Properties of Al-Mn-Mg-Er-Zr Alloy Fabricated by Laser Powder Bed Fusion (this opens in a new tab) (Jiang Yu et al.)
Microstructure Evolution and Dynamic Recrystallization Behavior of SLM GH3536 Superalloy During hot Deformation (this opens in a new tab) (Zhanwei Yuan et al.)
Mechanical Properties of Laser-Powder Bed Fusion Processed Fe-15Cr-6Ni-6Mn Multi-phase Steel at Room and Cryogenic Temperatures (this opens in a new tab) (Jun Young Park et al.)
Investigating complex geometrical features in LPBF-produced parts: a material-based comparison between different titanium alloys (this opens in a new tab) (A. Carrozza et al.)