Skip to main content
Log in
Mathematical Programming Computation

A Publication of the Mathematical Optimization Society

Publishing model:

Submission guidelines

Contents

Instructions for Authors

Manuscript Submission

Manuscript Submission

Submission of a manuscript implies: that the work described has not been published before; that it is not under consideration for publication anywhere else; that its publication has been approved by all co-authors, if any, as well as by the responsible authorities – tacitly or explicitly – at the institute where the work has been carried out. The publisher will not be held legally responsible should there be any claims for compensation.

Permissions

Authors wishing to include figures, tables, or text passages that have already been published elsewhere are required to obtain permission from the copyright owner(s) for both the print and online format and to include evidence that such permission has been granted when submitting their papers. Any material received without such evidence will be assumed to originate from the authors.

Online Submission

Please follow the hyperlink “Submit manuscript” and upload all of your manuscript files following the instructions given on the screen.

Source Files

Please ensure you provide all relevant editable source files at every submission and revision. Failing to submit a complete set of editable source files will result in your article not being considered for review. For your manuscript text please always submit in common word processing formats such as .docx or LaTeX.

Additional Information for Source Files

During the evaluation procedure, please submit a PDF file presenting the entire submitted manuscript, using the formatting instructions below. If you wish to include a cover letter and any ancillary documents, they should be submitted as separate files. The journal will request source files and separate files for figures when and if a manuscript is accepted.

MPC Reviewing Guidelines

Criteria for Acceptance

The main criterion for acceptance of a manuscript to Mathematical Programming Computation (MPC) is presenting a significant, novel development in some computational aspect of mathematical optimization. Submissions concerned with topics closely related to optimization may also be considered, depending on the likelihood of finding qualified reviewers drawn from the mathematical optimization community. Unless a specific exception is made by the editorial board, submissions to MPC should include software and/or data, which the journal evaluates in conjunction with the submitted manuscript.

The required significance and novelty may take many forms, including but not limited to any of the following:

  • New or modified computational techniques offering improved performance over the documented academic literature when applied to some reasonable subset of problem instances
  • New computational techniques that exhibit noteworthy potential, originality, or insight
  • Noteworthy and substantially new applications of existing computational techniques
  • New software applications, frameworks, or libraries likely to be useful for mathematical optimization
  • Comparative tests that provide useful new insights into the conditions under which various algorithms are likely to perform well or poorly
  • Useful new software implementation techniques specific to mathematical optimization
  • New or improved optimization modeling languages, tools, or environments
  • Testing frameworks or libraries of problem instances likely to be helpful in algorithm development or evaluation.

A significant advancement in any one of these areas may be considered sufficient for acceptance. Algorithmic novelty is not required for every submission.

The following guiding principles govern MPC’s evaluation of submissions:

  1. Claims about behavior of algorithms should be supported by sufficient empirical evidence, and not solely by theoretical means such as complexity estimates or convergence rates (but such theoretical analyses are welcomed in conjunction with empirical evidence).
  2. The best practices of the field should be followed in justifying claims based on empirical data. In particular,

    • Problem instances should be realistic in size and difficulty, and there should be enough test instances to draw valid conclusions. Manuscripts that demonstrate proposed algorithms on just a few small numerical examples will not be considered. Care should be exercised when using randomly generated problem instances, since in some situations their properties may not be reflective of real problems.
    • Submissions should generally contain sufficient information to allow for reproduction of the claimed results.
    • Awareness should be shown regarding factors influencing observed performance, including the hardware and programming environment used.
    • Appropriate summarization and/or statistical techniques should be used when aggregating and analyzing computational results, and appropriate care taken in supporting inferences drawn from them.

  3. Evaluation of the performance and usefulness of software should take into account its licensing, availability of its source code, and its level of documentation. As one possible example of this principle, a fully documented algorithm with an open-source implementation could still be considered a significant development if it improves on other fully documented open-source tools but does not outperform commercial, closed-source, proprietary software.

MPC considers submissions spanning the spectrum of optimization methods, including both heuristic methods and those that provide some form of certificate regarding solution quality, such as optimality gap guarantees or satisfaction of global or local optimality conditions. However, careful and extensive empirical computational work is particularly important for submissions focused on heuristic methods, with run-time performance and solution quality being carefully analyzed in comparison to reasonable alternative approaches.

The above criteria are not exhaustive and are applied subject to the judgment and discretion of the editorial board.

Proceedings Policy

Versions of papers that previously published in refereed proceedings will be considered for publication in Mathematical Programming Computation, subject to the following conditions:

  1. Most importantly, the manuscript submitted to Mathematical Programming Computation contains substantial and significant contributions not present in the proceedings version. The final determination of a “substantial and significant” additional contribution is by judgment of the editorial board and referees.
  2. The submitted manuscript refers to the previously published proceedings version(s) and clearly explains the relationship between the versions and what additional contributions are made in the submitted manuscript.
  3. The following supplemental material is included:
    • The original proceedings paper.
    • Any companions or separate appendices accompanying the original proceedings paper, along with an explanation of the extent to which they were part of the original proceedings paper’s review process.
    • A separate document briefly describing how the submitted manuscript differs from the published proceedings paper and makes a substantial additional contribution. When applicable, this document should also explain any change in authorship from the original conference paper.
    • Sufficient information to identify which parts of the submission are identical to the proceedings version. If this information cannot be succinctly provided in the document supplied in part (c), then the authors should supply an additional version of the submission with all portions that are identical to the earlier proceedings paper highlighted clearly.
  4. The authors secure appropriate copyright release permissions from the proceedings publisher so that any already copyrighted material from the original proceedings paper can be published in Mathematical Programming Computation, should the submission be accepted.

Reviewing Process

Manuscripts submitted to MPC are typically reviewed by two general referees selected from the relevant worldwide research community, and one technical editor (TE). The regular reviewers focus primarily on the submitted manuscript, while the TE performs a technical review concentrating on the software and/or data aspect of the submission. Such technical reviews are required in most cases. Occasionally, however, such as for some manuscripts describing problem libraries, the editorial board may determine that a technical review is unnecessary or inappropriate, and no TE will be assigned, leaving only two regular reviewers. For revisions of prior submissions, it is common for further technical review to waived, for example in cases where revisions were requested only to the manuscript and not to the submitted software or data.

The regular reviewers and TE handling a paper are all anonymous and are invited by the manuscript’s associate editor, who also remains anonymous and is selected by the manuscript’s area editor. The TE is selected from among the set of technical editors listed on the journal editorial board site (although occasional exceptions may be made to this policy). In some cases, a TE and one of the general referees may be the same person, issuing a single joint report.

Very occasionally, the journal editorial board may elect to assign more than two regular reviewers to a submission.

When selecting reviewers, the editorial board seeks to avoid conflicts of interest and close associates of the authors, such as frequent collaborators, former advisees, or former advisors.

MPC accepts manuscript submissions from its own editorial board members in cases in which the identities of the associate editor, reviewers, and technical editor handling the manuscript can remain fully confidential. To be accepted, manuscripts submitted by editorial board members must meet the same quality standards as all other accepted submissions; there is absolutely no special preference or consideration given to such submissions.

MPC accepts manuscript submissions from its own editorial board members in cases in which the identities of the associate editor, reviewers, and technical editor handling the manuscript can remain fully confidential. In practice, this policy means that:

  • The editor-in-chief does not submit manuscripts.
  • Area editors only submit in the rare event that the manuscript covers a different area from the one they are responsible for, or the editor-in-chief is able to act as area editor. Thus, submissions from area editors are generally discouraged.
  • Associate editors may submit manuscripts so long as more than one other qualified associate editor is available for the manuscript. This determination is made by the editor-in-chief and area editors.
  • Since technical editors fulfill a role quite similar to that of individual confidential manuscript reviewers, they are free to submit manuscripts in most situations.


To be accepted, manuscripts submitted by editorial board members must meet the same quality standards as all other accepted submissions; there is absolutely no special preference or consideration given to such submissions.

Technical Review

The journal requires accompanying software and/or data to be submitted for technical review with most manuscripts. Software/data submission is not simultaneous with manuscript submission, but is requested once a manuscript has cleared initial quality checks and the selected associate editor begins soliciting reviews. At this point, the editor-in-chief or other journal staff will contact the corresponding author and request the software/data portion of the submission.

For software, source code submission is required. Open-source software, publicly available under a suitable license, is preferred but not required. For non-open-source software, the journal will keep the submitted source code in confidence. Open-source software may be assessed as being more useful than proprietary software, increasing the chance of acceptance.

The journal presently maintains a server to support software/data submissions. The usual procedure is that one of a submission’s authors provides an SSH public key to the journal staff, who use it to provide access to a Linux virtual machine (VM) created on the server. This VM will be pre-loaded with common optimization and mathematical software, but the authors have administrator access to the VM and may thus change or enhance its configuration as necessary. When authors have completed setting up their software and/or tests on the VM, they inform the journal staff, and the assigned TE is given access to the VM to perform evaluation.

Some submissions may require computational resources not available on the journal’s server, such as large numbers of processor cores, very large amounts of RAM, unusually large amounts of file storage, or specialized hardware. In this case, special arrangements will be made for technical review.

The technical review has several purposes:

  • To provide some verification of the claimed results
  • For the TE to assess the usefulness of the submitted software or problem library
  • For the TE to assess the quality of the implementation.


Not all of these criteria are applicable to every submission.

Because of hardware and system differences, it is not expected that the TE be able to exactly replicate run times reported in manuscripts. But qualitatively similar results are expected, for example that the relative performance of algorithms and relative difficulty of problem instances resemble what is described in the manuscript. Nevertheless, the manuscript should contain a description of the configuration(s) on which its reported results were obtained, including the operating system, versions of supporting software such as Gurobi or CPLEX, the parameter settings used for such software, and basic hardware information such as the amount of RAM and processor type.

In general, the journal prefers software submissions usable beyond simple replication of manuscripts’ reported results. For example, the journal prefers, when appropriate,

  • Submissions that support technical editors’ solving new problem instances not directly provided by the authors. Technical editors are encouraged to try such tests when time and other conditions permit.
  • Submissions containing subroutines, subroutine libraries, class frameworks, or applications that practitioners or other researchers could directly incorporate into their work.


Submissions whose software components have no realistic use beside verifying results reported in their manuscripts will still be considered, but may receive lower evaluations. When appropriate, a technical review should also evaluate ease of use of the submission, that is, how readily practitioners or other researchers would be able to make use of the described software or data library.

When applicable, the technical review should also evaluate whether the submission appears to recognizably implement the methods described in the manuscript and constitutes a quality implementation in the sense that it follows proper software design principles and a good coding style. These aspects of the review need not be at a line-by-line level of detail. When setting up the VM for evaluation, authors are encouraged to facilitate this possible aspect of the review by providing general information regarding the structure and function of their program modules and/or the organization and format of the provided data. This kind of information need not be in the submitted manuscript itself unless likely to be of importance to readers should the manuscript be accepted.

Title Page

Please make sure your title page contains the following information.

Title

The title should be concise and informative.

Author information

  • The name(s) of the author(s)
  • The affiliation(s) of the author(s), i.e. institution, (department), city, (state), country
  • A clear indication and an active e-mail address of the corresponding author
  • If available, the 16-digit ORCID of the author(s)

If address information is provided with the affiliation(s) it will also be published.

For authors that are (temporarily) unaffiliated we will only capture their city and country of residence, not their e-mail address unless specifically requested.

Large Language Models (LLMs), such as ChatGPT, do not currently satisfy our authorship criteria. Notably an attribution of authorship carries with it accountability for the work, which cannot be effectively applied to LLMs. Use of an LLM should be properly documented in the Methods section (and if a Methods section is not available, in a suitable alternative part) of the manuscript.

Abstract

Please provide an abstract of 150 to 250 words. The abstract should not contain any undefined abbreviations or unspecified references.

For life science journals only (when applicable)

  • Trial registration number and date of registration for prospectively registered trials
  • Trial registration number and date of registration, followed by “retrospectively registered”, for retrospectively registered trials

Keywords

Please provide 4 to 6 keywords which can be used for indexing purposes.

Classification code

MSC

An appropriate number of MSC codes should be provided. The Mathematics Subject Classification (MSC) is used to categorize items covered by the two reviewing databases, Mathematical Reviews and Zentralblatt MATH, see example 2

www.ams.org/msc

Text

Text Formatting and File Submission

It is strongly preferred that manuscripts be prepared in LaTeX. In LaTeX, please use Springer’s “svjour3” LaTeX macro package in the zip file linked below and choose the formatting option “smallextended”. Do not alter the page size and margins from those used by the journal format. In particular, do not include the "geometry" package in your LaTeX preamble, since this package will alter the text area of each page even if no commands are issued to it. Manuscripts other than “short communications” may also be prepared using common word-processing software such as Microsoft Word, but LaTex is strongly preferred.

During the review process, manuscripts should be submitted as a single PDF file in which all figures and graphical material are embedded. Any additional material such as cover letters, supplementary information, or ancillary information that might be useful in the review process should be submitted as separate files. After acceptance, full source files must be submitted according to instructions that will be e-mailed to the authors.

Instructions for Authors (Download zip file, 188 kB)

Word files are also accepted.

Headings

Please use the decimal system of headings with no more than three levels.

Abbreviations

Abbreviations should be defined at first mention and used consistently thereafter.

Footnotes

Footnotes can be used to give additional information, which may include the citation of a reference included in the reference list. They should not consist solely of a reference citation, and they should never include the bibliographic details of a reference. They should also not contain any figures or tables.

Footnotes to the text are numbered consecutively; those to tables should be indicated by superscript lower-case letters (or asterisks for significance values and other statistical data). Footnotes to the title or the authors of the article are not given reference symbols.

Always use footnotes instead of endnotes.

Acknowledgments

Acknowledgments of people, grants, funds, etc. should be placed in a separate section on the title page. The names of funding organizations should be written in full.

Scientific style

Please use the standard mathematical notation for formulae, symbols etc.:

  • Italic for single letters that denote mathematical constants, variables, and unknown quantities
  • Roman/upright for numerals, operators, and punctuation, and commonly defined functions or abbreviations, e.g., cos, det, e or exp, lim, log, max, min, sin, tan, d (for derivative)
  • Bold for vectors, tensors, and matrices.

References

Citation

Reference citations in the text should be identified by numbers in square brackets. Some examples:

  1. Negotiation research spans many disciplines [3].
  2. This result was later contradicted by Becker and Seligman [5].
  3. This effect has been widely studied [1-3, 7].

Reference list

The list of references should only include works that are cited in the text and that have been published or accepted for publication. Personal communications and unpublished works should only be mentioned in the text. Do not use footnotes or endnotes as a substitute for a reference list.

The entries in the list should be numbered consecutively.

  • Journal article

    Hamburger, C.: Quasimonotonicity, regularity and duality for nonlinear systems of partial differential equations. Ann. Mat. Pura Appl. 169, 321–354 (1995)

  • Article by DOI

    Sajti, C.L., Georgio, S., Khodorkovsky, V., Marine, W.: New nanohybrid materials for biophotonics. Appl. Phys. A (2007). https://doi.org/10.1007/s00339-007-4137-z

  • Book

    Geddes, K.O., Czapor, S.R., Labahn, G.: Algorithms for Computer Algebra. Kluwer, Boston (1992)

  • Book chapter

    Broy, M.: Software engineering — from auxiliary to key technologies. In: Broy, M., Denert, E. (eds.) Software Pioneers, pp. 10–13. Springer, Heidelberg (2002)

  • Online document

    Cartwright, J.: Big stars have weather too. IOP Publishing PhysicsWeb. http://physicsweb.org/articles/news/11/6/16/1 (2007). Accessed 26 June 2007

Always use the standard abbreviation of a journal’s name according to the ISSN List of Title Word Abbreviations, see

ISSN LTWA

If you are unsure, please use the full journal title.

Statements & Declarations

The following statements must be included in your submitted manuscript under the heading 'Statements and Declarations'. This should be placed after the References section. Please note that submissions that do not include required statements will be returned as incomplete.

Funding

Please describe any sources of funding that have supported the work. The statement should include details of any grants received (please give the name of the funding agency and grant number).

Example statements:

“This work was supported by […] (Grant numbers […] and […]). Author A.B. has received research support from Company A.”

“The authors declare that no funds, grants, or other support were received during the preparation of this manuscript.”

Competing Interests

Authors are required to disclose financial or non-financial interests that are directly or indirectly related to the work submitted for publication. Interests within the last 3 years of beginning the work (conducting the research and preparing the work for submission) should be reported. Interests outside the 3-year time frame must be disclosed if they could reasonably be perceived as influencing the submitted work.

Example statements:

“Financial interests: Author A and B declare they have no financial interests. Author C has received speaker and consultant honoraria from Company M. Dr. C has received speaker honorarium and research funding from Company M and Company N. Author D has received travel support from Company O. Non-financial interests: Author D has served on advisory boards for Company M and Company N.”

“The authors have no relevant financial or non-financial interests to disclose.”

Please refer to the “Competing Interests” section below for more information on how to complete these sections.

Author Contributions

Authors are encouraged to include a statement that specifies the contribution of every author to the research and preparation of the manuscript.

Example statement:

“All authors contributed to the study conception and design. Material preparation, data collection and analysis were performed by [full name], [full name] and [full name]. The first draft of the manuscript was written by [full name] and all authors commented on previous versions of the manuscript. All authors read and approved the final manuscript.”

Please refer to the “Authorship Principles ” section below for more information on how to complete this section.

Data Availability

This journal encourages authors to provide an optional statement of data availability in their article. Data Availability Statements should include information on where data supporting the results reported in the article can be found, including, where applicable, hyperlinks to publicly archived datasets analysed or generated during the study. Data availability statements can also indicate whether data are available on request from the authors and where no data are available, if appropriate.

Example statements:

“The datasets generated during and/or analysed during the current study are available in the [NAME] repository, [PERSISTENT LINK TO DATASETS]”

“The datasets generated during and/or analysed during the current study are available from the corresponding author on reasonable request.”

Please refer to the “Research Data Policy and Data Availability” section below for more information on how to complete this section.

Tables

  • All tables are to be numbered using Arabic numerals.
  • Tables should always be cited in text in consecutive numerical order.
  • For each table, please supply a table caption (title) explaining the components of the table.
  • Identify any previously published material by giving the original source in the form of a reference at the end of the table caption.
  • Footnotes to tables should be indicated by superscript lower-case letters (or asterisks for significance values and other statistical data) and included beneath the table body.

Artwork and Illustrations Guidelines

Electronic Figure Submission (Required after Acceptance Only)

  • Supply all figures electronically.
  • Indicate what graphics program was used to create the artwork.
  • For vector graphics, the preferred format is EPS; for halftones, please use TIFF format. MSOffice files are also acceptable.
  • Vector graphics containing fonts must have the fonts embedded in the files.
  • Name your figure files with "Fig" and the figure number, e.g., Fig1.eps.

Line Art

  • Definition: Black and white graphic with no shading.
  • Do not use faint lines and/or lettering and check that all lines and lettering within the figures are legible at final size.
  • All lines should be at least 0.1 mm (0.3 pt) wide.
  • Scanned line drawings and line drawings in bitmap format should have a minimum resolution of 1200 dpi.
  • Vector graphics containing fonts must have the fonts embedded in the files.

Halftone Art

  • Definition: Photographs, drawings, or paintings with fine shading, etc.
  • If any magnification is used in the photographs, indicate this by using scale bars within the figures themselves.
  • Halftones should have a minimum resolution of 300 dpi.

Combination Art

  • Definition: a combination of halftone and line art, e.g., halftones containing line drawing, extensive lettering, color diagrams, etc.
  • Combination artwork should have a minimum resolution of 600 dpi.

Color Art

  • Color art is free of charge for online publication.
  • If black and white will be shown in the print version, make sure that the main information will still be visible. Many colors are not distinguishable from one another when converted to black and white. A simple way to check this is to make a xerographic copy to see if the necessary distinctions between the different colors are still apparent.
  • If the figures will be printed in black and white, do not refer to color in the captions.
  • Color illustrations should be submitted as RGB (8 bits per channel).

Figure Lettering

  • To add lettering, it is best to use Helvetica or Arial (sans serif fonts).
  • Keep lettering consistently sized throughout your final-sized artwork, usually about 2–3 mm (8–12 pt).
  • Variance of type size within an illustration should be minimal, e.g., do not use 8-pt type on an axis and 20-pt type for the axis label.
  • Avoid effects such as shading, outline letters, etc.
  • Do not include titles or captions within your illustrations.

Figure Numbering

  • All figures are to be numbered using Arabic numerals.
  • Figures should always be cited in text in consecutive numerical order.
  • Figure parts should be denoted by lowercase letters (a, b, c, etc.).
  • If an appendix appears in your article and it contains one or more figures, continue the consecutive numbering of the main text. Do not number the appendix figures,"A1, A2, A3, etc." Figures in online appendices [Supplementary Information (SI)] should, however, be numbered separately.

Figure Captions

  • Each figure should have a concise caption describing accurately what the figure depicts. Include the captions in the text file of the manuscript, not in the figure file.
  • Figure captions begin with the term Fig. in bold type, followed by the figure number, also in bold type.
  • No punctuation is to be included after the number, nor is any punctuation to be placed at the end of the caption.
  • Identify all elements found in the figure in the figure caption; and use boxes, circles, etc., as coordinate points in graphs.
  • Identify previously published material by giving the original source in the form of a reference citation at the end of the figure caption.

Figure Placement and Size

  • Figures should be submitted within the body of the text. Only if the file size of the manuscript causes problems in uploading it, the large figures should be submitted separately from the text.
  • When preparing your figures, size figures to fit in the column width.
  • For large-sized journals the figures should be 84 mm (for double-column text areas), or 174 mm (for single-column text areas) wide and not higher than 234 mm.
  • For small-sized journals, the figures should be 119 mm wide and not higher than 195 mm.

Permissions

If you include figures that have already been published elsewhere, you must obtain permission from the copyright owner(s) for both the print and online format. Please be aware that some publishers do not grant electronic rights for free and that Springer will not be able to refund any costs that may have occurred to receive these permissions. In such cases, material from other sources should be used.

Accessibility

In order to give people of all abilities and disabilities access to the content of your figures, please make sure that

  • All figures have descriptive captions (blind users could then use a text-to-speech software or a text-to-Braille hardware)
  • Patterns are used instead of or in addition to colors for conveying information (colorblind users would then be able to distinguish the visual elements)
  • Any figure lettering has a contrast ratio of at least 4.5:1

Generative AI Images

Please check Springer’s policy on generative AI images and make sure your work adheres to the principles described therein.

Supplementary Information (SI)

Springer accepts electronic multimedia files (animations, movies, audio, etc.) and other supplementary files to be published online along with an article or a book chapter. This feature can add dimension to the author's article, as certain information cannot be printed or is more convenient in electronic form.

Before submitting research datasets as Supplementary Information, authors should read the journal’s Research data policy. We encourage research data to be archived in data repositories wherever possible.

Submission

  • Supply all supplementary material in standard file formats.
  • Please include in each file the following information: article title, journal name, author names; affiliation and e-mail address of the corresponding author.
  • To accommodate user downloads, please keep in mind that larger-sized files may require very long download times and that some users may experience other problems during downloading.

Audio, Video, and Animations

  • Aspect ratio: 16:9 or 4:3
  • Maximum file size: 25 GB for high resolution files; 5 GB for low resolution files
  • Minimum video duration: 1 sec
  • Supported file formats: avi, wmv, mp4, mov, m2p, mp2, mpg, mpeg, flv, mxf, mts, m4v, 3gp

Text and Presentations

  • Submit your material in PDF format; .doc or .ppt files are not suitable for long-term viability.
  • A collection of figures may also be combined in a PDF file.

Spreadsheets

  • Spreadsheets should be submitted as .csv or .xlsx files (MS Excel).

Specialized Formats

  • Specialized format such as .pdb (chemical), .wrl (VRML), .nb (Mathematica notebook), and .tex can also be supplied.

Collecting Multiple Files

  • It is possible to collect multiple files in a .zip or .gz file.

Numbering

  • If supplying any supplementary material, the text must make specific mention of the material as a citation, similar to that of figures and tables.
  • Refer to the supplementary files as “Online Resource”, e.g., "... as shown in the animation (Online Resource 3)", “... additional data are given in Online Resource 4”.
  • Name the files consecutively, e.g. “ESM_3.mpg”, “ESM_4.pdf”.

Captions

  • For each supplementary material, please supply a concise caption describing the content of the file.

Processing of supplementary files

  • Supplementary Information (SI) will be published as received from the author without any conversion, editing, or reformatting.

Accessibility

In order to give people of all abilities and disabilities access to the content of your supplementary files, please make sure that

  • The manuscript contains a descriptive caption for each supplementary material
  • Video files do not contain anything that flashes more than three times per second (so that users prone to seizures caused by such effects are not put at risk)

Generative AI Images

Please check Springer’s policy on generative AI images and make sure your work adheres to the principles described therein.

Editing Services

English

How can you help improve your manuscript for publication?

Presenting your work in a well-structured manuscript and in well-written English gives it its best chance for editors and reviewers to understand it and evaluate it fairly. Many researchers find that getting some independent support helps them present their results in the best possible light. The experts at Springer Nature Author Services can help you with manuscript preparation—including English language editing, developmental comments, manuscript formatting, figure preparation, translation, and more.

Get started and save 15%

You can also use our free Grammar Check tool for an evaluation of your work.

Please note that using these tools, or any other service, is not a requirement for publication, nor does it imply or guarantee that editors will accept the article, or even select it for peer review.

Chinese (中文)

您怎么做才有助于改进您的稿件以便顺利发表?

如果在结构精巧的稿件中用精心组织的英语展示您的作品,就能最大限度地让编辑和审稿人理解并公正评估您的作品。许多研究人员发现,获得一些独立支持有助于他们以尽可能美好的方式展示他们的成果。Springer Nature Author Services 的专家可帮助您准备稿件,具体包括润色英语表述、添加有见地的注释、为稿件排版、设计图表、翻译等。

开始使用即可节省 15% 的费用

您还可以使用我们的免费语法检查工具来评估您的作品。

请注意,使用这些工具或任何其他服务不是发表前必须满足的要求,也不暗示或保证相关文章定会被编辑接受(甚至未必会被选送同行评审)。

Japanese (日本語)

発表に備えて、論文を改善するにはどうすればよいでしょうか?

内容が適切に組み立てられ、質の高い英語で書かれた論文を投稿すれば、編集者や査読者が論文を理解し、公正に評価するための最善の機会となります。多くの研究者は、個別のサポートを受けることで、研究結果を可能な限り最高の形で発表できると思っています。Springer Nature Author Servicesのエキスパートが、英文の編集、建設的な提言、論文の書式、図の調整、翻訳など、論文の作成をサポートいたします。

今なら15%割引でご利用いただけます

原稿の評価に、無料の文法チェックツールもご利用いただけます。

これらのツールや他のサービスをご利用いただくことは、論文を掲載するための要件ではありません。また、編集者が論文を受理したり、査読に選定したりすることを示唆または保証するものではないことにご注意ください。

Korean (한국어)

게재를 위해 원고를 개선하려면 어떻게 해야 할까요?

여러분의 작품을 체계적인 원고로 발표하는 것은 편집자와 심사자가 여러분의 연구를 이해하고 공정하게 평가할 수 있는 최선의 기회를 제공합니다. 많은 연구자들은 어느 정도 독립적인 지원을 받는 것이 가능한 한 최선의 방법으로 자신의 결과를 발표하는 데 도움이 된다고 합니다. Springer Nature Author Services 전문가들은 영어 편집, 발전적인 논평, 원고 서식 지정, 그림 준비, 번역 등과 같은 원고 준비를 도와드릴 수 있습니다.

지금 시작하면 15% 할인됩니다.

또한 당사의 무료 문법 검사도구를 사용하여 여러분의 연구를 평가할 수 있습니다.

이러한 도구 또는 기타 서비스를 사용하는 것은 게재를 위한 필수 요구사항이 아니며, 편집자가 해당 논문을 수락하거나 피어 리뷰에 해당 논문을 선택한다는 것을 암시하거나 보장하지는 않습니다.

Research Data Policy and Data Availability Statements

This journal operates a type 2 research data policy.

The journal strongly encourages that all datasets on which the conclusions of the paper rely should be available to readers. We encourage authors to ensure that their datasets are either deposited in publicly available repositories (where available and appropriate) or presented in the main manuscript or additional supporting files whenever possible. Please see Springer Nature’s information on recommended repositories.

List of Repositories

Research Data Policy

General repositories - for all types of research data - such as figshare and Dryad may be used where appropriate.

Datasets that are assigned digital object identifiers (DOIs) by a data repository may be cited in the reference list. Data citations should include the minimum information recommended by DataCite: authors, title, publisher (repository name), identifier.

DataCite

Where a widely established research community expectation for data archiving in public repositories exists, submission to a community-endorsed, public repository is mandatory. Persistent identifiers (such as DOIs and accession numbers) for relevant datasets must be provided in the paper.

If the journal that you’re submitting to uses double-blind peer review and you are providing reviewers with access to your data (for example via a repository link, supplementary information or data on request), it is strongly suggested that the authorship in the data is also blinded. There are data repositories that can assist with this and/or will create a link to mask the authorship of your data.

For more information:

Research Data Policy Frequently Asked Questions

Data availability

The journal encourages authors to provide a statement of Data availability in their article. Data availability statements should include information on where data supporting the results reported in the article can be found, including, where applicable, hyperlinks to publicly archived datasets analysed or generated during the study. Data availability statements can also indicate whether data are available on request from the authors and where no data are available, if appropriate.

Data Availability statements can take one of the following forms (or a combination of more than one if required for multiple datasets):

1. The datasets generated during and/or analysed during the current study are available in the [NAME] repository, [PERSISTENT WEB LINK TO DATASETS]

2. The datasets generated during and/or analysed during the current study are not publicly available due [REASON WHY DATA ARE NOT PUBLIC] but are available from the corresponding author on reasonable request.

3. The datasets generated during and/or analysed during the current study are available from the corresponding author on reasonable request.

4.Data sharing not applicable to this article as no datasets were generated or analysed during the current study

5. All data generated or analysed during this study are included in this published article [and its supplementary information files].

More examples of template data availability statements, which include examples of openly available and restricted access datasets, are available:

Data availability statements

Authors who need help understanding our data sharing policies, help finding a suitable data repository, or help organising and sharing research data can access our Author Support portal for additional guidance.

Ethical Responsibilities of Authors

This journal is committed to upholding the integrity of the scientific record. As a member of the Committee on Publication Ethics (COPE) the journal will follow the COPE guidelines on how to deal with potential acts of misconduct.

Authors should refrain from misrepresenting research results which could damage the trust in the journal, the professionalism of scientific authorship, and ultimately the entire scientific endeavour. Maintaining integrity of the research and its presentation is helped by following the rules of good scientific practice, which include*:

  • The manuscript should not be submitted to more than one journal for simultaneous consideration.
  • The submitted work should be original and should not have been published elsewhere in any form or language (partially or in full), unless the new work concerns an expansion of previous work. (Please provide transparency on the re-use of material to avoid the concerns about text-recycling (‘self-plagiarism’).
  • A single study should not be split up into several parts to increase the quantity of submissions and submitted to various journals or to one journal over time (i.e. ‘salami-slicing/publishing’).
  • Concurrent or secondary publication is sometimes justifiable, provided certain conditions are met. Examples include: translations or a manuscript that is intended for a different group of readers.
  • Results should be presented clearly, honestly, and without fabrication, falsification or inappropriate data manipulation (including image based manipulation). Authors should adhere to discipline-specific rules for acquiring, selecting and processing data.
  • No data, text, or theories by others are presented as if they were the author’s own (‘plagiarism’). Proper acknowledgements to other works must be given (this includes material that is closely copied (near verbatim), summarized and/or paraphrased), quotation marks (to indicate words taken from another source) are used for verbatim copying of material, and permissions secured for material that is copyrighted.

Important note: the journal may use software to screen for plagiarism.

  • Authors should make sure they have permissions for the use of software, questionnaires/(web) surveys and scales in their studies (if appropriate).
  • Research articles and non-research articles (e.g. Opinion, Review, and Commentary articles) must cite appropriate and relevant literature in support of the claims made. Excessive and inappropriate self-citation or coordinated efforts among several authors to collectively self-cite is strongly discouraged.
  • Authors should avoid untrue statements about an entity (who can be an individual person or a company) or descriptions of their behavior or actions that could potentially be seen as personal attacks or allegations about that person.
  • Research that may be misapplied to pose a threat to public health or national security should be clearly identified in the manuscript (e.g. dual use of research). Examples include creation of harmful consequences of biological agents or toxins, disruption of immunity of vaccines, unusual hazards in the use of chemicals, weaponization of research/technology (amongst others).
  • Authors are strongly advised to ensure the author group, the Corresponding Author, and the order of authors are all correct at submission. Adding and/or deleting authors during the revision stages is generally not permitted, but in some cases may be warranted. Reasons for changes in authorship should be explained in detail. Please note that changes to authorship cannot be made after acceptance of a manuscript.

*All of the above are guidelines and authors need to make sure to respect third parties rights such as copyright and/or moral rights.

Upon request authors should be prepared to send relevant documentation or data in order to verify the validity of the results presented. This could be in the form of raw data, samples, records, etc. Sensitive information in the form of confidential or proprietary data is excluded.

If there is suspicion of misbehavior or alleged fraud the Journal and/or Publisher will carry out an investigation following COPE guidelines. If, after investigation, there are valid concerns, the author(s) concerned will be contacted under their given e-mail address and given an opportunity to address the issue. Depending on the situation, this may result in the Journal’s and/or Publisher’s implementation of the following measures, including, but not limited to:

  • If the manuscript is still under consideration, it may be rejected and returned to the author.
  • If the article has already been published online, depending on the nature and severity of the infraction:

    - an erratum/correction may be placed with the article

    - an expression of concern may be placed with the article

    - or in severe cases retraction of the article may occur.

The reason will be given in the published erratum/correction, expression of concern or retraction note. Please note that retraction means that the article is maintained on the platform, watermarked “retracted” and the explanation for the retraction is provided in a note linked to the watermarked article.

  • The author’s institution may be informed
  • A notice of suspected transgression of ethical standards in the peer review system may be included as part of the author’s and article’s bibliographic record.

Fundamental errors

Authors have an obligation to correct mistakes once they discover a significant error or inaccuracy in their published article. The author(s) is/are requested to contact the journal and explain in what sense the error is impacting the article. A decision on how to correct the literature will depend on the nature of the error. This may be a correction or retraction. The retraction note should provide transparency which parts of the article are impacted by the error.

Suggesting / excluding reviewers

Authors are welcome to suggest suitable reviewers and/or request the exclusion of certain individuals when they submit their manuscripts. When suggesting reviewers, authors should make sure they are totally independent and not connected to the work in any way. It is strongly recommended to suggest a mix of reviewers from different countries and different institutions. When suggesting reviewers, the Corresponding Author must provide an institutional email address for each suggested reviewer, or, if this is not possible to include other means of verifying the identity such as a link to a personal homepage, a link to the publication record or a researcher or author ID in the submission letter. Please note that the Journal may not use the suggestions, but suggestions are appreciated and may help facilitate the peer review process.

Authorship principles

These guidelines describe authorship principles and good authorship practices to which prospective authors should adhere to.

Authorship clarified

The Journal and Publisher assume all authors agreed with the content and that all gave explicit consent to submit and that they obtained consent from the responsible authorities at the institute/organization where the work has been carried out, before the work is submitted.

The Publisher does not prescribe the kinds of contributions that warrant authorship. It is recommended that authors adhere to the guidelines for authorship that are applicable in their specific research field. In absence of specific guidelines it is recommended to adhere to the following guidelines*:

All authors whose names appear on the submission

1) made substantial contributions to the conception or design of the work; or the acquisition, analysis, or interpretation of data; or the creation of new software used in the work;

2) drafted the work or revised it critically for important intellectual content;

3) approved the version to be published; and

4) agree to be accountable for all aspects of the work in ensuring that questions related to the accuracy or integrity of any part of the work are appropriately investigated and resolved.

* Based on/adapted from:

ICMJE, Defining the Role of Authors and Contributors,

Transparency in authors’ contributions and responsibilities to promote integrity in scientific publication, McNutt at all, PNAS February 27, 2018

Disclosures and declarations

All authors are requested to include information regarding sources of funding, financial or non-financial interests, study-specific approval by the appropriate ethics committee for research involving humans and/or animals, informed consent if the research involved human participants, and a statement on welfare of animals if the research involved animals (as appropriate).

The decision whether such information should be included is not only dependent on the scope of the journal, but also the scope of the article. Work submitted for publication may have implications for public health or general welfare and in those cases it is the responsibility of all authors to include the appropriate disclosures and declarations.

Data transparency

All authors are requested to make sure that all data and materials as well as software application or custom code support their published claims and comply with field standards. Please note that journals may have individual policies on (sharing) research data in concordance with disciplinary norms and expectations.

Role of the Corresponding Author

One author is assigned as Corresponding Author and acts on behalf of all co-authors and ensures that questions related to the accuracy or integrity of any part of the work are appropriately addressed.

The Corresponding Author is responsible for the following requirements:

  • ensuring that all listed authors have approved the manuscript before submission, including the names and order of authors;
  • managing all communication between the Journal and all co-authors, before and after publication;*
  • providing transparency on re-use of material and mention any unpublished material (for example manuscripts in press) included in the manuscript in a cover letter to the Editor;
  • making sure disclosures, declarations and transparency on data statements from all authors are included in the manuscript as appropriate (see above).

* The requirement of managing all communication between the journal and all co-authors during submission and proofing may be delegated to a Contact or Submitting Author. In this case please make sure the Corresponding Author is clearly indicated in the manuscript.

Author contributions

In absence of specific instructions and in research fields where it is possible to describe discrete efforts, the Publisher recommends authors to include contribution statements in the work that specifies the contribution of every author in order to promote transparency. These contributions should be listed at the separate title page.

Examples of such statement(s) are shown below:

• Free text:

All authors contributed to the study conception and design. Material preparation, data collection and analysis were performed by [full name], [full name] and [full name]. The first draft of the manuscript was written by [full name] and all authors commented on previous versions of the manuscript. All authors read and approved the final manuscript.

Example: CRediT taxonomy:

• Conceptualization: [full name], …; Methodology: [full name], …; Formal analysis and investigation: [full name], …; Writing - original draft preparation: [full name, …]; Writing - review and editing: [full name], …; Funding acquisition: [full name], …; Resources: [full name], …; Supervision: [full name],….

For review articles where discrete statements are less applicable a statement should be included who had the idea for the article, who performed the literature search and data analysis, and who drafted and/or critically revised the work.

For articles that are based primarily on the student’s dissertation or thesis, it is recommended that the student is usually listed as principal author:

A Graduate Student’s Guide to Determining Authorship Credit and Authorship Order, APA Science Student Council 2006

Affiliation

The primary affiliation for each author should be the institution where the majority of their work was done. If an author has subsequently moved, the current address may additionally be stated. Addresses will not be updated or changed after publication of the article.

Changes to authorship

Authors are strongly advised to ensure the correct author group, the Corresponding Author, and the order of authors at submission. Changes of authorship by adding or deleting authors, and/or changes in Corresponding Author, and/or changes in the sequence of authors are not accepted after acceptance of a manuscript.

  • Please note that author names will be published exactly as they appear on the accepted submission!

Please make sure that the names of all authors are present and correctly spelled, and that addresses and affiliations are current.

Adding and/or deleting authors at revision stage are generally not permitted, but in some cases it may be warranted. Reasons for these changes in authorship should be explained. Approval of the change during revision is at the discretion of the Editor-in-Chief. Please note that journals may have individual policies on adding and/or deleting authors during revision stage.

Author identification

Authors are recommended to use their ORCID ID when submitting an article for consideration or acquire an ORCID ID via the submission process.

Deceased or incapacitated authors

For cases in which a co-author dies or is incapacitated during the writing, submission, or peer-review process, and the co-authors feel it is appropriate to include the author, co-authors should obtain approval from a (legal) representative which could be a direct relative.

Authorship issues or disputes

In the case of an authorship dispute during peer review or after acceptance and publication, the Journal will not be in a position to investigate or adjudicate. Authors will be asked to resolve the dispute themselves. If they are unable the Journal reserves the right to withdraw a manuscript from the editorial process or in case of a published paper raise the issue with the authors’ institution(s) and abide by its guidelines.

Confidentiality

Authors should treat all communication with the Journal as confidential which includes correspondence with direct representatives from the Journal such as Editors-in-Chief and/or Handling Editors and reviewers’ reports unless explicit consent has been received to share information.

Competing Interests

Authors are requested to disclose interests that are directly or indirectly related to the work submitted for publication. Interests within the last 3 years of beginning the work (conducting the research and preparing the work for submission) should be reported. Interests outside the 3-year time frame must be disclosed if they could reasonably be perceived as influencing the submitted work. Disclosure of interests provides a complete and transparent process and helps readers form their own judgments of potential bias. This is not meant to imply that a financial relationship with an organization that sponsored the research or compensation received for consultancy work is inappropriate.

Editorial Board Members and Editors are required to declare any competing interests and may be excluded from the peer review process if a competing interest exists. In addition, they should exclude themselves from handling manuscripts in cases where there is a competing interest. This may include – but is not limited to – having previously published with one or more of the authors, and sharing the same institution as one or more of the authors. Where an Editor or Editorial Board Member is on the author list they must declare this in the competing interests section on the submitted manuscript. If they are an author or have any other competing interest regarding a specific manuscript, another Editor or member of the Editorial Board will be assigned to assume responsibility for overseeing peer review. These submissions are subject to the exact same review process as any other manuscript. Editorial Board Members are welcome to submit papers to the journal. These submissions are not given any priority over other manuscripts, and Editorial Board Member status has no bearing on editorial consideration.

Interests that should be considered and disclosed but are not limited to the following:

Funding: Research grants from funding agencies (please give the research funder and the grant number) and/or research support (including salaries, equipment, supplies, reimbursement for attending symposia, and other expenses) by organizations that may gain or lose financially through publication of this manuscript.

Employment: Recent (while engaged in the research project), present or anticipated employment by any organization that may gain or lose financially through publication of this manuscript. This includes multiple affiliations (if applicable).

Financial interests: Stocks or shares in companies (including holdings of spouse and/or children) that may gain or lose financially through publication of this manuscript; consultation fees or other forms of remuneration from organizations that may gain or lose financially; patents or patent applications whose value may be affected by publication of this manuscript.

It is difficult to specify a threshold at which a financial interest becomes significant, any such figure is necessarily arbitrary, so one possible practical guideline is the following: "Any undeclared financial interest that could embarrass the author were it to become publicly known after the work was published."

Non-financial interests: In addition, authors are requested to disclose interests that go beyond financial interests that could impart bias on the work submitted for publication such as professional interests, personal relationships or personal beliefs (amongst others). Examples include, but are not limited to: position on editorial board, advisory board or board of directors or other type of management relationships; writing and/or consulting for educational purposes; expert witness; mentoring relations; and so forth.

Primary research articles require a disclosure statement. Review articles present an expert synthesis of evidence and may be treated as an authoritative work on a subject. Review articles therefore require a disclosure statement.Other article types such as editorials, book reviews, comments (amongst others) may, dependent on their content, require a disclosure statement. If you are unclear whether your article type requires a disclosure statement, please contact the Editor-in-Chief.

Please note that, in addition to the above requirements, funding information (given that funding is a potential competing interest (as mentioned above)) needs to be disclosed upon submission of the manuscript in the peer review system. This information will automatically be added to the Record of CrossMark, however it is not added to the manuscript itself. Under ‘summary of requirements’ (see below) funding information should be included in the ‘Declarations’ section.

Summary of requirements

The above should be summarized in a statement and placed in a ‘Declarations’ section before the reference list under a heading of ‘Funding’ and/or ‘Competing interests’. Other declarations include Ethics approval, Consent, Data, Material and/or Code availability and Authors’ contribution statements.

Please see the various examples of wording below and revise/customize the sample statements according to your own needs.

When all authors have the same (or no) conflicts and/or funding it is sufficient to use one blanket statement.

Examples of statements to be used when funding has been received:

  • Partial financial support was received from [...]
  • The research leading to these results received funding from […] under Grant Agreement No[…].
  • This study was funded by […]
  • This work was supported by […] (Grant numbers […] and […]

Examples of statements to be used when there is no funding:

  • The authors did not receive support from any organization for the submitted work.
  • No funding was received to assist with the preparation of this manuscript.
  • No funding was received for conducting this study.
  • No funds, grants, or other support was received.

Examples of statements to be used when there are interests to declare:

  • Financial interests: Author A has received research support from Company A. Author B has received a speaker honorarium from Company Wand owns stock in Company X. Author C is consultant to company Y.

    Non-financial interests: Author C is an unpaid member of committee Z.

  • Financial interests: The authors declare they have no financial interests.

    Non-financial interests: Author A is on the board of directors of Y and receives no compensation as member of the board of directors.

  • Financial interests: Author A received a speaking fee from Y for Z. Author B receives a salary from association X. X where s/he is the Executive Director.

    Non-financial interests: none.

  • Financial interests: Author A and B declare they have no financial interests. Author C has received speaker and consultant honoraria from Company M and Company N. Dr. C has received speaker honorarium and research funding from Company M and Company O. Author D has received travel support from Company O.

    Non-financial interests: Author D has served on advisory boards for Company M, Company N and Company O.

Examples of statements to be used when authors have nothing to declare:

  • The authors have no relevant financial or non-financial interests to disclose.
  • The authors have no competing interests to declare that are relevant to the content of this article.
  • All authors certify that they have no affiliations with or involvement in any organization or entity with any financial interest or non-financial interest in the subject matter or materials discussed in this manuscript.
  • The authors have no financial or proprietary interests in any material discussed in this article.

Authors are responsible for correctness of the statements provided in the manuscript. See also Authorship Principles. The Editor-in-Chief reserves the right to reject submissions that do not meet the guidelines described in this section.

After Acceptance

Upon acceptance, your article will be exported to Production to undergo typesetting. Shortly after this you will receive two e-mails. One contains a request to confirm your affiliation, choose the publishing model for your article, as well as to arrange rights and payment of any associated publication cost. A second e-mail containing a link to your article’s proofs will be sent once typesetting is completed.

Article publishing agreement

Depending on the ownership of the journal and its policies, you will either grant the Publisher an exclusive licence to publish the article or will be asked to transfer copyright of the article to the Publisher.

Offprints

Offprints can be ordered by the corresponding author.

Color illustrations

Publication of color illustrations is free of charge.

Proof reading

The purpose of the proof is to check for typesetting or conversion errors and the completeness and accuracy of the text, tables and figures. Substantial changes in content, e.g., new results, corrected values, title and authorship, are not allowed without the approval of the Editor.

After online publication, further changes can only be made in the form of an Erratum, which will be hyperlinked to the article.

Online First

The article will be published online after receipt of the corrected proofs. This is the official first publication citable with the DOI. After release of the printed version, the paper can also be cited by issue and page numbers.

Open Choice

Open Choice allows you to publish open access in more than 1850 Springer Nature journals, making your research more visible and accessible immediately on publication.

Article processing charges (APCs) vary by journal – view the full list

Benefits:

  • Increased researcher engagement: Open Choice enables access by anyone with an internet connection, immediately on publication.
  • Higher visibility and impact: In Springer hybrid journals, OA articles are accessed 4 times more often on average, and cited 1.7 more times on average*.

  • Easy compliance with funder and institutional mandates: Many funders require open access publishing, and some take compliance into account when assessing future grant applications.

It is easy to find funding to support open access – please see our funding and support pages for more information.

*) Within the first three years of publication. Springer Nature hybrid journal OA impact analysis, 2018.

Open Choice

Funding and Support pages

Copyright and license term – CC BY

Open Choice articles do not require transfer of copyright as the copyright remains with the author. In opting for open access, the author(s) agree to publish the article under the Creative Commons Attribution License.

Find more about the license agreement

Open access publishing

To find out more about publishing your work Open Access in Mathematical Programming Computation, including information on fees, funding and licenses, visit our Open access publishing page.

Navigation