On the mathematical theory of the microstructure evolution during the final stage of liquid phase sintering V. T. Golovchan Production, Structure, Properties 29 April 2014 Pages: 89 - 95
The Cu-Co-Fe oxide system applied to carbon nanotubes synthesized on Fe2O3 E. V. IshchenkoS. V. GaidaiT. M. Zakharova Production, Structure, Properties 29 April 2014 Pages: 82 - 88
The effect of structural state and temperature on mechanical properties and deformation mechanisms of WC-Co hard alloy Yu. V. Milman Production, Structure, Properties 29 April 2014 Pages: 65 - 81
Equation of state of single-crystal cubic boron phosphide Y. Le GodecM. MezouarV. L. Solozhenko Letters to the Editor 07 March 2014 Pages: 61 - 64
Tool wear and tool life of PCBN, binderless cBN and wBN-cBN tools in continuous finish hard turning of cold work tool steel V. M. BushlyaO. A. GutnichenkoS. Gunnarsson Tools, Powders, Pastes 07 March 2014 Pages: 49 - 60
Comparative analysis of performance of cubic boron nitride and microcrystalline alumina tools in profile grinding of form cutters V. K. StarkovS. A. RyabtsevO. S. Kiskin Investigation of Machining Processes 07 March 2014 Pages: 43 - 48
Improving efficiency of finishing natural stone using diamond-polymer fiber tools V. D. KurilovychYu. D. FilatovV. A. Kovalyov Investigation of Machining Processes 07 March 2014 Pages: 35 - 42
Superhard coatings of the (Zr-Ti-Si)N and (Ti-Hf-Si)N systems produced by vacuum-arc deposition from a separated flow V. M. BeresnevS. A. KlimenkoS. S. Grankin Production, Structure, Properties 07 March 2014 Pages: 29 - 34
Analysis of the interactions in the Cu-Ti-diamond and Co-W-diamond systems in wetting diamond polycrystals and infiltration of UDD diamond nanopowder at high pressure and temperature E. M. LutsakO. O. BochechkaN. M. Bilyavina Production, Structure, Properties 07 March 2014 Pages: 23 - 28
Self-propagating high-temperature synthesis of boron subphosphide B12P2 V. A. MukhanovP. S. SokolovV. L. Solozhenko Production, Structure, Properties 07 March 2014 Pages: 18 - 22
Studies of the oxidation stability, mechanical characteristics of materials based on max phases of the Ti-Al-(C, N) systems, and of the possibility of their use as tool bonds and materials for polishing T. A. PrikhnaA. V. StarostinaP. Chartier Production, Structure, Properties 07 March 2014 Pages: 9 - 17
Influence of the wurtzitic boron nitride initial structural state on the formation of the granular structure of the wBN-Based materials. II. Structural transformations in the microstructure formation of the samples of materials based on various types of wBN G. S. OleinikV. M. VolkogonA. V. Kotko Production, Structure, Properties 07 March 2014 Pages: 1 - 8
Self-propagating high-temperature synthesis of boron phosphide V. A. MukhanovP. S. SokolovV. L. Solozhenko Letters to The Editor 28 December 2013 Pages: 415 - 417
Deep purification of detonation nanodiamond material V. Yu. DolmatovA. VehanenT. A. Shpadkovskaya Tools, Powders, Pastes 28 December 2013 Pages: 408 - 414
Structure, properties, and applications of ceramic composite produced of nanostructured powders of composition ZrO2 + 3% Y2O3 A. G. KolmakovV. I. AntipovL. Tanovich Tools, Powders, Pastes 28 December 2013 Pages: 399 - 407
Dynamic stability of the process of turning nickel superalloys using a toolholder produced by selective laser sintering O. A. GutnichenkoV. M. BushlyaJ. -E. Ståhl Investigation of Machining Processes 28 December 2013 Pages: 391 - 398
Optimization of diamond grinding conditions for steel R6M5F3 allowing for the process unsteadiness V. V. PoltavetsP. G. MatyukhaV. V. Gabitov Investigation of Machining Processes 28 December 2013 Pages: 383 - 390
Effects of sintering temperature and addition of Fe and B4C on hardness and wear resistance of diamond reinforced metal matrix composites M. SimsirK. E. Öksüz Production, Structure, Properties 28 December 2013 Pages: 369 - 382
The effect of the deposition parameters of nitrides of high-entropy alloys (TiZrHfVNb)N on their structure, composition, mechanical and tribological properties A. D. PogrebnjakI. V. YakushchenkoB. A. Mukushev Production, Structure, Properties 28 December 2013 Pages: 356 - 368
Study of phase transformations in silicon by scanning tunneling spectroscopy and nanoindentation O. G. LysenkoS. N. DubG. N. Tolmacheva Production, Structure, Properties 28 December 2013 Pages: 350 - 355
A novel layer-structured PtN2: First-principles calculations C. Z. FanJ. LiJ. L. He Production, Structure, Properties 28 December 2013 Pages: 339 - 349
Influence of the wurtzitic boron nitride initial structural state on the formation of the granular structure of the wBN based materials. I. Structural characteristics of particles of the initial wBN powders G. S. OleinikV. M. VolkogonA. V. Kotko Production, Structure, Properties 28 December 2013 Pages: 331 - 338
Diamond polycrystalline composite material with dispersion-hardened nickel-based additive E. E. AshkinaziA. A. Shul’zhenkoM. V. Suprun Letter to the Editor 07 November 2013 Pages: 327 - 329
Statistical analysis of compression strength of single grains of SHM powders and improvement of the strength assessment procedure Yu. V. SirotaV. I. Kushch Tools, Powders, Pastes 07 November 2013 Pages: 316 - 326
The influence of physical-mechanical characteristics of AS6 synthetic diamond powders on wear resistance of grinding tools V. I. LavrinenkoG. D. Il’nitskayaD. G. Muzychka Tools, Powders, Pastes 07 November 2013 Pages: 309 - 315
A mechanism of diamond-abrasive finishing of monocrystalline silicon carbide Yu. D. FilatovA. G. VetrovS. V. Kovalev Investigation of Machining Processes 07 November 2013 Pages: 303 - 308
Highly porous cubic boron nitride wheels for dry grinding V. K. Starkov Investigation of Machining Processes 07 November 2013 Pages: 298 - 302
Structure formation and properties of NbC-Hadfield steel cermets Ya. A. Kryl’P. M. Prysyazhnyuk Production, Structure, Properties 07 November 2013 Pages: 292 - 297
Local deformation in diamond crystals defined by the Fourier transformations of Kikuchi patterns M. D. BorchaS. V. BalovsyakV. N. Tkach Production, Structure, Properties 07 November 2013 Pages: 284 - 291
Structural approach to the development of wear-resistant composite materials E. V. Sukhovaya Production, Structure, Properties 07 November 2013 Pages: 277 - 283
Studies of the ductile mode of cutting brittle materials (A review) A. M. Kovalchenko Production, Structure, Properties 07 November 2013 Pages: 259 - 276
The influence of diamond powder as a filler on properties of a copper-sapphire glued joint V. P. Maslov Tools, Powders, Pastes 28 August 2013 Pages: 256 - 258
Radioactive nanodiamonds V. Yu. DolmatovE. K. GorbunovV. Myllymäki Tools, Powders, Pastes 28 August 2013 Pages: 251 - 255
The study of fracture toughness and failure mechanisms of cutting-tool hardmetals with plasma-modified surface S. S. SamotuginV. I. LavrinenkoYu. S. Samotugina Investigation of Machining Processes 28 August 2013 Pages: 242 - 250
Mechanical properties of HfB2 whiskers S. N. DubP. I. LobodaV. N. Tkach Production, Structure, Properties 28 August 2013 Pages: 234 - 241
Catalytic activity of copper oxide added to a sample as a copper-polymer carboxylated complex in the reaction of carbon black oxidation V. Ya. ZabugaG. G. TsapyukB. G. Mischanchuk Production, Structure, Properties 28 August 2013 Pages: 227 - 233
Distribution of local deformations in diamond crystals according to the analysis of Kikuchi lines profile intensities M. D. BorchaS. V. BalovsyakV. N. Tkach Production, Structure, Properties 28 August 2013 Pages: 220 - 226
Morphology and spectral characteristics of octahedral diamond crystals from Yubileinaya diamond pipe (Yakutiya) Lin Fang Production, Structure, Properties 28 August 2013 Pages: 214 - 219
Developments in synthesis, characterization, and application of large, high-quality CVD single crystal diamond Q. LiangY. F. MengR. J. Hemley Production, Structure, Properties 28 August 2013 Pages: 195 - 213
The accuracy of diffraction patterns taken in a diamond-anvil cell using an X-ray diffractometer according to the Dobrovol’skii-Shvedov method N. V. NovikovYu. N. KrivosheyaL. K. Shvedov Letter to the Editor 02 July 2013 Pages: 192 - 194
On the calculation of cutting forces and chip-tool contact interaction characteristics in cutting ductile metals A. A. Vinogradov Tools, Powders, Pastes 02 July 2013 Pages: 183 - 191
Tools for precision diamond machining of spherical heads of endoprostheses from pure titanium E. A. PashchenkoS. E. SheykinR. V. Milotskii Tools, Powders, Pastes 02 July 2013 Pages: 175 - 182
The study of the influence of cutting conditions on machined surface roughness in turning hardened steels with cutting tools of cBN-based composite N. E. Stakhniv Investigation of Machining Processes 02 July 2013 Pages: 166 - 174
Study of mechanical properties of LaB6 single crystal by nanoindentation S. N. DubG. P. KislayaP. I. Loboda Production, Structure, Properties 02 July 2013 Pages: 158 - 165
Boron-doped diamond single crystals for probes of the high-vacuum tunneling microscopy A. P. ChepugovA. N. ChaikaO. G. Lysenko Production, Structure, Properties 02 July 2013 Pages: 151 - 157
A possible mechanism of nanodiamond formation during detonation synthesis V. Yu. DolmatovV. MyllymäkiA. Vehanen Production, Structure, Properties 02 July 2013 Pages: 143 - 150
Production of ultradispersed crystalline silicon carbide by plasmodynamic synthesis A. A. SivkovD. S. NikitinI. A. Rakhmatullin Production, Structure, Properties 02 July 2013 Pages: 137 - 142
Properties of diamonds seed-grown in the magnesium-carbon system T. V. KovalenkoS. A. Ivakhnenko Production, Structure, Properties 02 July 2013 Pages: 131 - 136
The influence of coolant pH on efficiency of machining sapphire A. V. VoloshinE. F. DolzhenkovaE. V. Slyunin Investigation of Machining Processes 24 April 2013 Pages: 126 - 130
The structurally changed layer of superabrasive wheel and workpiece contact surfaces as a factor of improving their wear resistance (a Change of Elemental Composition) V. I. Lavrinenko Investigation of Machining Processes 24 April 2013 Pages: 118 - 125
