Editor's Choice Articles

All of these articles are free to read on SpringerLink

2021

Gaps and Barriers to Successful Integration and Adoption of Practical Materials Informatics Tools and Workflows

Microstructure Generation via Generative Adversarial Network for Heterogeneous, Topologically Complex 3D Materials

Fe Thin Film Coated Optics for Corrosion Monitoring: Optical and Electrochemical Studies

Production Strategy for Manufacturing Large-Scale AlSi10Mg Components by Laser Powder Bed Fusion

A Review: Understanding the Science and the Impacts of Impurities upon the Electrolytic Bath of Hall–Héroult Reduction Cells

Review: Magnesium Sheet Alloy Development for Room Temperature Forming

Biotemplating of a Highly Porous Cellulose–Silica Composite from Apium graveolens by a Low-Toxicity Sol–Gel Technique

Artificial Neural Networks Framework for Detection of Defects in 3D-Printed Fiber Reinforcement Composites
 

2020

Joining Technologies for Metal Additive Manufacturing in the Energy Industry

Machine Learning-Aided Parametrically Homogenized Crystal Plasticity Model (PHCPM) for Single Crystal Ni-Based Superalloys

Laser Powder Bed Fusion Parameter Selection via Machine-Learning-Augmented Process Modeling

Multiscale modelling of defect phenomena in Platinum using machine learning of force fields

ICME Approach to Determining Critical Pore Size of IN718 Produced by Selective Laser Melting

Listening to Radiation Damage In Situ: Passive and Active Acoustic Techniques

Recent Advances in Mitigation of Whiskers from Electroplated Tin

Influence of Gas Flow Speed on Laser Plume Attenuation and Powder Bed Particle Pickup in Laser Powder Bed Fusion

Helical and Bouligand Porous Scaffolds Fabricated by Dynamic Low Strength Magnetic Field Freeze Casting

Cryogenic Stress-Driven Grain Growth Observed via Microcompression with in situ Electron Backscatter Diffraction

A Brief Review of Fly Ash as Reinforcement for Composites with Improved Mechanical and Tribological Properties

Isothermal Continuous Equal Channel Angular Pressing of Magnesium Alloy AZ31

Cold Spray Deposition of Thermoelectric Materials

Powder Casting: Producing Bulk Metal Components from Powder Without Compaction

Electromagnetic Effects on Solidification Defect Formation in Continuous Steel Casting

Dross Formation in Aluminum Melts During the Charging of Beverage Can Scrap Bales with Different Densities Using Various Thermal Pretreatments

Rate Theory Model of Irradiation-Induced Solute Clustering in b.c.c. Fe-Based Alloys

Influence of Induced Convection on Transformation Kinetics During Rapid Solidification of Steel Alloys: The Retained Damage Model
 

2019

The Effect of Cooling Rate on High-Temperature Precipitation in a Powder-Metallurgy, Gamma/Gamma-Prime Nickel-Base Superalloy

From Wire to Seamless Flow-Formed Tube: Leveraging the Combination of Wire Arc Additive Manufacturing and Metal Forming

Characterization of Additive Manufacturing for Process Tubing

Powder Recycling Effects on the Tensile and Fatigue Behavior of Additively Manufactured Ti-6Al-4V Parts

The Interface Between Degradable Mg and Tissue

Repeatedly Applied Peptide Film Kills Bacteria on Dental Implants

Strain Rate Dependent Mechanical Properties of TWIP Steel

Anatase TiO2 Nanotubes-Aggregated Porous Microspheres for Ti Foil-Based Quasi-Solid State Dye-Sensitized Solar Cells with Improved Photo-voltaic Performance

Recent development of graphene-based ink and other conductive-material-based inks for flexible electronics

In Situ Study of the Stress Relaxation During Aging of Nickel-Base Superalloy Forgings

Alloy Design and Processing Design of Magnesium Alloys Using 2nd Phases

Benchmark for Tap-Hole Lifecycle Management Practices in Silicomanganese Production When Submerged Arc Furnace Technology of Circular Design is Applied

Predicting Microstructure-Sensitive Fatigue-Crack Path in 3D Using a Machine Learning Framework

Development of Fe-9Cr Alloy via High-Energy Ball Milling and Spark Plasma Sintering

Advanced Manufacturing for Nuclear Energy

Multiscale Computational Strategies for Heterogeneous Materials with Defects: Coupling Modeling with Experiments and Uncertainty Quantification

The Sandy Desilication Product Process Concept

Selective Laser Melting of Al0.3CoCrFeNi High-Entropy Alloy: Printability, Microstructure, and Mechanical Properties

Integrated Simulation Framework for Additively Manufactured Ti-6Al-4V: Melt Pool Dynamics, Microstructure, Solid-State Phase Transformation, and Microelastic Response

Characterization of Plastic Deformation in Lath Martensitic Steel by Micro-pillar Compression Focused on Sub-block and Lath Boundaries

Improved Tolerance of Lanthanum Nickelate (La2NiO4+δ) Cathodes to Chromium Poisoning Under Current Load in Solid Oxide Fuel Cells

Phonon Transport Across Coherent and Incoherent Interfaces

Packing Changes in Melting, Freezing, and Coalescence of Titanium Nanoparticles from Atomic Simulations

Disassembly Automation for Recycling End-of-Life Lithium-Ion Pouch Cells

A Study on the Performance of Dye Sensitized Solar Cells Using Extract from Wrightia tinctoria R.Br. as Photosensitizers

2018

Integrating Fiber Optic Strain Sensors into Metal Using Ultrasonic Additive Manufacturing

Achieving Functionally Graded Material Composition Through Bicontinuous Mesostructural Geometry in Material Extrusion Additive Manufacturing

Effects of Testing Method on Stretch-Flangeability of Dual-Phase 980/1180 Steel Grades

Data-Driven Correlation Analysis Between Observed 3D Fatigue-Crack Path and Computed Fields from High-Fidelity, Crystal-Plasticity, Finite-Element Simulations

Damascus Steel Revisited

Corrosion of Structural Alloys in High-Temperature Molten Fluoride Salts for Applications in Molten Salt Reactors

Nanoscale Solute Partitioning and Carbide Precipitation in a Multiphase TRIP Steel Analyzed by Atom Probe Tomography

A Review of Nanoporous Metals in Interconnects

Redefining the β-Phase Stability in Ti-Nb-Zr Alloys for Alloy Design and Microstructural Prediction

PRISMS: An Integrated, Open-Source Framework for Accelerating Predictive Structural Materials Science

Variables Applicable to Benchmarking of Tap-Hole Life-Cycle Management Practices in Coke-Bed-Based Ferroalloy Production

Application of ICME to Engineer Fatigue-Resistant Ni-Base Superalloys Microstructures

Corrosion Characteristics of Laser-Engineered Net Shaping Additively-Manufactured 316L Stainless Steel

Removal of Antimony and Bismuth from Copper Electrorefining Electrolyte: Part II—An Investigation of Two Proprietary Solvent Extraction Extractants

Numerical Assessment of a Filtration Experiment Influenced by Microscale Carbon Monoxide Bubbles Arising in Steel Melt

2017

Mechanical Characterization of Mesoscale Interfaces Using Indentation Techniques

Airborne Emissions from Si/FeSi Production

Computer Vision and Machine Learning for Autonomous Characterization of AM Powder Feedstocks

Strategy for Texture Management in Metals Additive Manufacturing

Effect of Pre-annealing on Sintering of Stainless Steel Fiber Felt

Identifying Structure–Property Relationships Through DREAM.3D Representative Volume Elements and DAMASK Crystal Plasticity Simulations: An Integrated Computational Materials Engineering Approach

Submerged Gas Jet Penetration: A Study of Bubbling Versus Jetting and Side Versus Bottom Blowing in Copper Bath Smelting

An Industrial Perspective on Environmentally Assisted Cracking of Some Commercially Used Carbon Steels and Corrosion-Resistant Alloys

Toward Low-Cost, High-Energy Density, and High-Power Density Lithium-Ion Batteries

Crystallographic Orientation Effect on Electromigration in Ni-Sn Microbump

Review of the Methods for Production of Spherical Ti and Ti Alloy Powder

A Comparative Study of Electrolyte Flow and Slime Particle Transport in a Newly Designed Copper Electrolytic Cell and a Laboratory-Scale Conventional Electrolytic Cell

Strong and ductile non-equiatomic high-entropy alloys: Design, processing, microstructure and mechanical properties

High entropy alloys - a current evaluation of founding ideas, core effects and exploring 'non-linear alloys'

Criticality in Bulk Metallic Glass Constituent Elements

Nanocrystalline Aluminum Truss Cores for Lightweight Sandwich Structures

New Development in Selective Laser Melting of Ti–6Al–4V: A Wider Processing Window for the Achievement of Fully Lamellar α + β Microstructures