JOM - Free Access to Editor's Choice Articles

All of these articles are free to read on SpringerLink

2024

Responses of Nano-sized Oxides and Damage Behaviors of Microstructure in ODS FeCrAl Alloy During Deformation (this opens in a new tab)

Standardization Gaps in Powder Feedstock Characterization and Establishing Acceptability for Reuse in Additive Manufacturing (this opens in a new tab)

Dimensional Accuracy Enhancement in Hydroforming of Tubular Components with Rectangular Cross-Sections (this opens in a new tab)

Thermal Conductivity and Microstructure of Cu-Coated Graphite Flake/Ti Alloy Composites Fabricated by Spark Plasma Sintering (this opens in a new tab)

Recycling NdFeB Magnets and Rare Earth Fluorescent Materials from Electronic Waste (this opens in a new tab)

Realizing the Ultrafast Homogenization of Bearing Steel Based on Solute Atom Diffusion Under Pulsed Electric Current (this opens in a new tab)

Development of Skutterudite-Type Thermoelectric Materials LaxCo4Sb12 Using High-Pressure Synthesis Method (this opens in a new tab)

The Effect of Heat Treatment on Local Mechanical Properties of Laser Powder Bed Fused and Hot Isostatically Pressed Al-Cu-Mg-Ag-TiB2 (A20X) Aluminum Alloy (this opens in a new tab)

2023

Microstructure and Residual Stress in Functionally Graded 316L Stainless Steel/Inconel 625 Alloys Fabricated by Direct Energy Deposition (this opens in a new tab)

Phase Equilibria of Ti-bearing Electric Furnace Slags in the CaO-MgO-SiO2-13%Al2O3-50%TiO2 System (this opens in a new tab)

Phase Stability During High-Temperature Oxidation (this opens in a new tab)

A Novel Approach for Enhanced Mechanical Properties in Solid-State Additive Manufacturing by Additive Friction Stir Deposition Using Thermally Stable Al-Ce-Mg Alloy (this opens in a new tab)

High-Selective Lithium Extraction from Spent LiFePO4 by Battery Roasting-Water Leaching Method (this opens in a new tab)

Gas–Liquid Cavity Shape in a Kaldo Furnace by Water Model Experimentation and Dimensional Analysis (this opens in a new tab)

Friction Extrusion: Solid-State Metal Synthesis and Recycling in Sustainable Manufacturing (this opens in a new tab)

In Situ X-ray Diffraction Investigation of Hydrogen Effects on Deformation-Induced Phase Transformation in Forged and Additively Manufactured 304L Stainless Steels (this opens in a new tab)

Fabrication and Testing of Bioinspired Composites with Curved Multilayer Microstructures (this opens in a new tab)

A Physically Based Model for Soft Magnets’ Anhysteretic Curve (this opens in a new tab)

Synthesis, Thermodynamic Properties, and Structural Characteristics of Multicomponent Compounds in the Ag–Ni–Sn–S System (this opens in a new tab)

Synchrotron x-Ray Study of Heterostructured Materials: A Review (this opens in a new tab)

Heterogeneous 3D Morphological Evolution of Ni Microparticles in Molten Salts: Visualized by Operando Synchrotron X-ray Nano-tomography (this opens in a new tab)

An Investigation into the Optimization of the Selective Laser Melting Process Parameters for Ti6Al4V Through Numerical Modelling (this opens in a new tab)

Enhancing Surface Finish of Additively Manufactured 316L Stainless Steel with Pulse/Pulse Reverse Electropolishing (this opens in a new tab)

A Hybrid Rotor Design with Reduced Rare Earth Magnets for Traction Motors (this opens in a new tab)

2022

Enhancing Surface Finish of Additively Manufactured 316L Stainless Steel with Pulse/Pulse Reverse Electropolishing (this opens in a new tab)

Numerical Simulation of Mechanically Adaptive Bone Remodeling Around Teeth and Implants: A Comparison with Clinical Images (this opens in a new tab)

Machine Learning-Guided Exploration of Glass-Forming Ability in Multicomponent Alloys (this opens in a new tab)

Issues, Developments, and Computation Analyses of Interfacial Stability in All-Solid-State Li Batteries (this opens in a new tab)

Deformation-Assisted Rejuvenation of Irradiation-Induced Phase Instabilities in Cu-Ta Heterophase Nanocomposite (this opens in a new tab)

Improving Tapping Experience—and Why to Choose a Comprehensive Approach (this opens in a new tab)

Influence of Hold Time on Dwell Fatigue Behavior in IMI834 Disc Forging (this opens in a new tab)

Inkjet Printing of Nanohydroxyapatite Gradients on Fibrous Scaffold for Bone–Ligament Enthesis (this opens in a new tab)

Interactive Exploration of High-Dimensional Phase Diagrams (this opens in a new tab)

Assessment of Outliers in Alloy Datasets Using Unsupervised Techniques (this opens in a new tab)

The Relationship Between Microstructure and Hardness in the Heat-Affected Zone of Line Pipe Steels (this opens in a new tab)

The Variation of the Electrical Resistance and Microstructure of SnBi based Solder Joints with Current Stressing (this opens in a new tab)

Technoeconomic Analysis of Rare-Earth Metal Recycling Using Efficient Metal Distillation (this opens in a new tab)

Fused Filament Fabrication on the Moon (this opens in a new tab)

A Review on Recycling of End-of-Life Light-Emitting Diodes for Metal Recovery (this opens in a new tab)

Developments in Thermodynamic Models of Deposit-Induced Corrosion of High-Temperature Coatings (this opens in a new tab)

2021

Gaps and Barriers to Successful Integration and Adoption of Practical Materials Informatics Tools and Workflows (this opens in a new tab)

Microstructure Generation via Generative Adversarial Network for Heterogeneous, Topologically Complex 3D Materials (this opens in a new tab)

Fe Thin Film Coated Optics for Corrosion Monitoring: Optical and Electrochemical Studies (this opens in a new tab)

Production Strategy for Manufacturing Large-Scale AlSi10Mg Components by Laser Powder Bed Fusion (this opens in a new tab)

A Review: Understanding the Science and the Impacts of Impurities upon the Electrolytic Bath of Hall–Héroult Reduction Cells (this opens in a new tab)

Review: Magnesium Sheet Alloy Development for Room Temperature Forming (this opens in a new tab)

Biotemplating of a Highly Porous Cellulose–Silica Composite from Apium graveolens by a Low-Toxicity Sol–Gel Technique (this opens in a new tab)

Artificial Neural Networks Framework for Detection of Defects in 3D-Printed Fiber Reinforcement Composites (this opens in a new tab)

Automated Image Processing Workflow for Morphological Analysis of Fluorescence Microscopy Cell Images (this opens in a new tab)

Refining of Secondary Aluminum: Important Chemical Factors (this opens in a new tab)

Alternating-Current Electrophoretic Deposition of Spinel Coatings on Porous Metallic Substrates for Solid Oxide Fuel Cell Applications (this opens in a new tab)

Development of Aerospace Materials Using Integrated Numerical and Physical Simulation (this opens in a new tab)

Review and Preliminary Investigation into Fuel Loss from Cermets Composed of Uranium Nitride and a Molybdenum-Tungsten Alloy for Nuclear Thermal Propulsion Using Mesoscale Simulations (this opens in a new tab)

A Multi-modal Data Merging Framework for Correlative Investigation of Strain Localization in Three Dimensions (this opens in a new tab)

Carbide-Free Bainite Transformations Above and Below Martensite Start Temperature Investigated by In-Situ High-Energy X-Ray Diffraction (this opens in a new tab)

Manufacturability of Ti-Al-4V Hollow-Walled Lattice Struts by Laser Powder Bed Fusion (this opens in a new tab)

Demonstration of a High-Throughput Tensile Testing Technique Using Femtosecond Laser-Fabricated Tensile Bars in AISI 316 and Additively Manufactured Grade 91 Steel (this opens in a new tab)

Additive Manufacturing of NiTi Shape Memory Alloy for Biomedical Applications: Review of the LPBF Process Ecosystem (this opens in a new tab)

Developments in Thermodynamic Models of Deposit-Induced Corrosion of High-Temperature Coatings (this opens in a new tab)
 

2020

Joining Technologies for Metal Additive Manufacturing in the Energy Industry (this opens in a new tab)

Machine Learning-Aided Parametrically Homogenized Crystal Plasticity Model (PHCPM) for Single Crystal Ni-Based Superalloys (this opens in a new tab)

Laser Powder Bed Fusion Parameter Selection via Machine-Learning-Augmented Process Modeling (this opens in a new tab)

Multiscale modelling of defect phenomena in Platinum using machine learning of force fields (this opens in a new tab)

ICME Approach to Determining Critical Pore Size of IN718 Produced by Selective Laser Melting (this opens in a new tab)

Listening to Radiation Damage In Situ: Passive and Active Acoustic Techniques (this opens in a new tab)

Recent Advances in Mitigation of Whiskers from Electroplated Tin (this opens in a new tab)

Influence of Gas Flow Speed on Laser Plume Attenuation and Powder Bed Particle Pickup in Laser Powder Bed Fusion (this opens in a new tab)

Helical and Bouligand Porous Scaffolds Fabricated by Dynamic Low Strength Magnetic Field Freeze Casting (this opens in a new tab)

Cryogenic Stress-Driven Grain Growth Observed via Microcompression with in situ Electron Backscatter Diffraction (this opens in a new tab)

A Brief Review of Fly Ash as Reinforcement for Composites with Improved Mechanical and Tribological Properties (this opens in a new tab)

Isothermal Continuous Equal Channel Angular Pressing of Magnesium Alloy AZ31 (this opens in a new tab)

Cold Spray Deposition of Thermoelectric Materials (this opens in a new tab)

Powder Casting: Producing Bulk Metal Components from Powder Without Compaction (this opens in a new tab)

Electromagnetic Effects on Solidification Defect Formation in Continuous Steel Casting (this opens in a new tab)

Dross Formation in Aluminum Melts During the Charging of Beverage Can Scrap Bales with Different Densities Using Various Thermal Pretreatments (this opens in a new tab)

Rate Theory Model of Irradiation-Induced Solute Clustering in b.c.c. Fe-Based Alloys (this opens in a new tab)

Influence of Induced Convection on Transformation Kinetics During Rapid Solidification of Steel Alloys: The Retained Damage Model (this opens in a new tab)
 

2019

The Effect of Cooling Rate on High-Temperature Precipitation in a Powder-Metallurgy, Gamma/Gamma-Prime Nickel-Base Superalloy (this opens in a new tab)

From Wire to Seamless Flow-Formed Tube: Leveraging the Combination of Wire Arc Additive Manufacturing and Metal Forming (this opens in a new tab)

Characterization of Additive Manufacturing for Process Tubing (this opens in a new tab)

Powder Recycling Effects on the Tensile and Fatigue Behavior of Additively Manufactured Ti-6Al-4V Parts (this opens in a new tab)

The Interface Between Degradable Mg and Tissue (this opens in a new tab)

Repeatedly Applied Peptide Film Kills Bacteria on Dental Implants (this opens in a new tab)

Strain Rate Dependent Mechanical Properties of TWIP Steel (this opens in a new tab)

Anatase TiO2 Nanotubes-Aggregated Porous Microspheres for Ti Foil-Based Quasi-Solid State Dye-Sensitized Solar Cells with Improved Photo-voltaic Performance (this opens in a new tab)

Recent development of graphene-based ink and other conductive-material-based inks for flexible electronics (this opens in a new tab)

In Situ Study of the Stress Relaxation During Aging of Nickel-Base Superalloy Forgings (this opens in a new tab)

Alloy Design and Processing Design of Magnesium Alloys Using 2nd Phases (this opens in a new tab)

Benchmark for Tap-Hole Lifecycle Management Practices in Silicomanganese Production When Submerged Arc Furnace Technology of Circular Design is Applied (this opens in a new tab)

Predicting Microstructure-Sensitive Fatigue-Crack Path in 3D Using a Machine Learning Framework (this opens in a new tab)

Development of Fe-9Cr Alloy via High-Energy Ball Milling and Spark Plasma Sintering (this opens in a new tab)

Advanced Manufacturing for Nuclear Energy (this opens in a new tab)

Multiscale Computational Strategies for Heterogeneous Materials with Defects: Coupling Modeling with Experiments and Uncertainty Quantification (this opens in a new tab)

The Sandy Desilication Product Process Concept (this opens in a new tab)

Selective Laser Melting of Al0.3CoCrFeNi High-Entropy Alloy: Printability, Microstructure, and Mechanical Properties (this opens in a new tab)

Integrated Simulation Framework for Additively Manufactured Ti-6Al-4V: Melt Pool Dynamics, Microstructure, Solid-State Phase Transformation, and Microelastic Response (this opens in a new tab)

Characterization of Plastic Deformation in Lath Martensitic Steel by Micro-pillar Compression Focused on Sub-block and Lath Boundaries (this opens in a new tab)

Improved Tolerance of Lanthanum Nickelate (La2NiO4+δ) Cathodes to Chromium Poisoning Under Current Load in Solid Oxide Fuel Cells (this opens in a new tab)

Phonon Transport Across Coherent and Incoherent Interfaces (this opens in a new tab)

Packing Changes in Melting, Freezing, and Coalescence of Titanium Nanoparticles from Atomic Simulations (this opens in a new tab)

Disassembly Automation for Recycling End-of-Life Lithium-Ion Pouch Cells (this opens in a new tab)

A Study on the Performance of Dye Sensitized Solar Cells Using Extract from Wrightia tinctoria R.Br. as Photosensitizers (this opens in a new tab)

 

2018

Integrating Fiber Optic Strain Sensors into Metal Using Ultrasonic Additive Manufacturing (this opens in a new tab)

Achieving Functionally Graded Material Composition Through Bicontinuous Mesostructural Geometry in Material Extrusion Additive Manufacturing (this opens in a new tab)

Effects of Testing Method on Stretch-Flangeability of Dual-Phase 980/1180 Steel Grades (this opens in a new tab)

Data-Driven Correlation Analysis Between Observed 3D Fatigue-Crack Path and Computed Fields from High-Fidelity, Crystal-Plasticity, Finite-Element Simulations (this opens in a new tab)

Damascus Steel Revisited (this opens in a new tab)

Corrosion of Structural Alloys in High-Temperature Molten Fluoride Salts for Applications in Molten Salt Reactors (this opens in a new tab)

Nanoscale Solute Partitioning and Carbide Precipitation in a Multiphase TRIP Steel Analyzed by Atom Probe Tomography (this opens in a new tab)

A Review of Nanoporous Metals in Interconnects (this opens in a new tab)

Redefining the β-Phase Stability in Ti-Nb-Zr Alloys for Alloy Design and Microstructural Prediction (this opens in a new tab)

PRISMS: An Integrated, Open-Source Framework for Accelerating Predictive Structural Materials Science (this opens in a new tab)

Variables Applicable to Benchmarking of Tap-Hole Life-Cycle Management Practices in Coke-Bed-Based Ferroalloy Production (this opens in a new tab)

Application of ICME to Engineer Fatigue-Resistant Ni-Base Superalloys Microstructures (this opens in a new tab)

Corrosion Characteristics of Laser-Engineered Net Shaping Additively-Manufactured 316L Stainless Steel (this opens in a new tab)

Removal of Antimony and Bismuth from Copper Electrorefining Electrolyte: Part II—An Investigation of Two Proprietary Solvent Extraction Extractants (this opens in a new tab)

Numerical Assessment of a Filtration Experiment Influenced by Microscale Carbon Monoxide Bubbles Arising in Steel Melt (this opens in a new tab)

2017

Mechanical Characterization of Mesoscale Interfaces Using Indentation Techniques (this opens in a new tab)

Airborne Emissions from Si/FeSi Production (this opens in a new tab)

Computer Vision and Machine Learning for Autonomous Characterization of AM Powder Feedstocks (this opens in a new tab)

Strategy for Texture Management in Metals Additive Manufacturing (this opens in a new tab)

Effect of Pre-annealing on Sintering of Stainless Steel Fiber Felt (this opens in a new tab)

Identifying Structure–Property Relationships Through DREAM.3D Representative Volume Elements and DAMASK Crystal Plasticity Simulations: An Integrated Computational Materials Engineering Approach (this opens in a new tab)

Submerged Gas Jet Penetration: A Study of Bubbling Versus Jetting and Side Versus Bottom Blowing in Copper Bath Smelting (this opens in a new tab)

An Industrial Perspective on Environmentally Assisted Cracking of Some Commercially Used Carbon Steels and Corrosion-Resistant Alloys (this opens in a new tab)

Toward Low-Cost, High-Energy Density, and High-Power Density Lithium-Ion Batteries (this opens in a new tab)

Crystallographic Orientation Effect on Electromigration in Ni-Sn Microbump (this opens in a new tab)

Review of the Methods for Production of Spherical Ti and Ti Alloy Powder (this opens in a new tab)

A Comparative Study of Electrolyte Flow and Slime Particle Transport in a Newly Designed Copper Electrolytic Cell and a Laboratory-Scale Conventional Electrolytic Cell (this opens in a new tab)

Strong and ductile non-equiatomic high-entropy alloys: Design, processing, microstructure and mechanical properties (this opens in a new tab)

High entropy alloys - a current evaluation of founding ideas, core effects and exploring 'non-linear alloys' (this opens in a new tab)

Criticality in Bulk Metallic Glass Constituent Elements (this opens in a new tab)

Nanocrystalline Aluminum Truss Cores for Lightweight Sandwich Structures (this opens in a new tab)

New Development in Selective Laser Melting of Ti–6Al–4V: A Wider Processing Window for the Achievement of Fully Lamellar α + β Microstructures (this opens in a new tab)