JOM - Free Access to Editor's Choice Articles

All of these articles are free to read on SpringerLink

2024

On the Strain Rate Sensitivity Measured by Nanoindentation at High Strain Rates (this opens in a new tab)

Grain Boundary Precipitation and Self-Organization in Two-Phase Alloys Under Irradiation: Phase Field Simulations and Experiments in Al-Sb (this opens in a new tab)

Responses of Nano-sized Oxides and Damage Behaviors of Microstructure in ODS FeCrAl Alloy During Deformation (this opens in a new tab)

Standardization Gaps in Powder Feedstock Characterization and Establishing Acceptability for Reuse in Additive Manufacturing (this opens in a new tab)

Dimensional Accuracy Enhancement in Hydroforming of Tubular Components with Rectangular Cross-Sections (this opens in a new tab)

Thermal Conductivity and Microstructure of Cu-Coated Graphite Flake/Ti Alloy Composites Fabricated by Spark Plasma Sintering (this opens in a new tab)

Recycling NdFeB Magnets and Rare Earth Fluorescent Materials from Electronic Waste (this opens in a new tab)

Realizing the Ultrafast Homogenization of Bearing Steel Based on Solute Atom Diffusion Under Pulsed Electric Current (this opens in a new tab)

Development of Skutterudite-Type Thermoelectric Materials LaxCo4Sb12 Using High-Pressure Synthesis Method (this opens in a new tab)

The Effect of Heat Treatment on Local Mechanical Properties of Laser Powder Bed Fused and Hot Isostatically Pressed Al-Cu-Mg-Ag-TiB2 (A20X) Aluminum Alloy (this opens in a new tab)

2023

Microstructure and Residual Stress in Functionally Graded 316L Stainless Steel/Inconel 625 Alloys Fabricated by Direct Energy Deposition (this opens in a new tab)

Phase Equilibria of Ti-bearing Electric Furnace Slags in the CaO-MgO-SiO2-13%Al2O3-50%TiO2 System (this opens in a new tab)

Phase Stability During High-Temperature Oxidation (this opens in a new tab)

A Novel Approach for Enhanced Mechanical Properties in Solid-State Additive Manufacturing by Additive Friction Stir Deposition Using Thermally Stable Al-Ce-Mg Alloy (this opens in a new tab)

High-Selective Lithium Extraction from Spent LiFePO4 by Battery Roasting-Water Leaching Method (this opens in a new tab)

Gas–Liquid Cavity Shape in a Kaldo Furnace by Water Model Experimentation and Dimensional Analysis (this opens in a new tab)

Friction Extrusion: Solid-State Metal Synthesis and Recycling in Sustainable Manufacturing (this opens in a new tab)

In Situ X-ray Diffraction Investigation of Hydrogen Effects on Deformation-Induced Phase Transformation in Forged and Additively Manufactured 304L Stainless Steels (this opens in a new tab)

Fabrication and Testing of Bioinspired Composites with Curved Multilayer Microstructures (this opens in a new tab)

A Physically Based Model for Soft Magnets’ Anhysteretic Curve (this opens in a new tab)

Synthesis, Thermodynamic Properties, and Structural Characteristics of Multicomponent Compounds in the Ag–Ni–Sn–S System (this opens in a new tab)

Synchrotron x-Ray Study of Heterostructured Materials: A Review (this opens in a new tab)

Heterogeneous 3D Morphological Evolution of Ni Microparticles in Molten Salts: Visualized by Operando Synchrotron X-ray Nano-tomography (this opens in a new tab)

An Investigation into the Optimization of the Selective Laser Melting Process Parameters for Ti6Al4V Through Numerical Modelling (this opens in a new tab)

Enhancing Surface Finish of Additively Manufactured 316L Stainless Steel with Pulse/Pulse Reverse Electropolishing (this opens in a new tab)

A Hybrid Rotor Design with Reduced Rare Earth Magnets for Traction Motors (this opens in a new tab)

2022

Enhancing Surface Finish of Additively Manufactured 316L Stainless Steel with Pulse/Pulse Reverse Electropolishing (this opens in a new tab)

Numerical Simulation of Mechanically Adaptive Bone Remodeling Around Teeth and Implants: A Comparison with Clinical Images (this opens in a new tab)

Machine Learning-Guided Exploration of Glass-Forming Ability in Multicomponent Alloys (this opens in a new tab)

Issues, Developments, and Computation Analyses of Interfacial Stability in All-Solid-State Li Batteries (this opens in a new tab)

Deformation-Assisted Rejuvenation of Irradiation-Induced Phase Instabilities in Cu-Ta Heterophase Nanocomposite (this opens in a new tab)

Improving Tapping Experience—and Why to Choose a Comprehensive Approach (this opens in a new tab)

Influence of Hold Time on Dwell Fatigue Behavior in IMI834 Disc Forging (this opens in a new tab)

Inkjet Printing of Nanohydroxyapatite Gradients on Fibrous Scaffold for Bone–Ligament Enthesis (this opens in a new tab)

Interactive Exploration of High-Dimensional Phase Diagrams (this opens in a new tab)

Assessment of Outliers in Alloy Datasets Using Unsupervised Techniques (this opens in a new tab)

The Relationship Between Microstructure and Hardness in the Heat-Affected Zone of Line Pipe Steels (this opens in a new tab)

The Variation of the Electrical Resistance and Microstructure of SnBi based Solder Joints with Current Stressing (this opens in a new tab)

Technoeconomic Analysis of Rare-Earth Metal Recycling Using Efficient Metal Distillation (this opens in a new tab)

Fused Filament Fabrication on the Moon (this opens in a new tab)

A Review on Recycling of End-of-Life Light-Emitting Diodes for Metal Recovery (this opens in a new tab)

Developments in Thermodynamic Models of Deposit-Induced Corrosion of High-Temperature Coatings (this opens in a new tab)

2021

Gaps and Barriers to Successful Integration and Adoption of Practical Materials Informatics Tools and Workflows (this opens in a new tab)

Microstructure Generation via Generative Adversarial Network for Heterogeneous, Topologically Complex 3D Materials (this opens in a new tab)

Fe Thin Film Coated Optics for Corrosion Monitoring: Optical and Electrochemical Studies (this opens in a new tab)

Production Strategy for Manufacturing Large-Scale AlSi10Mg Components by Laser Powder Bed Fusion (this opens in a new tab)

A Review: Understanding the Science and the Impacts of Impurities upon the Electrolytic Bath of Hall–Héroult Reduction Cells (this opens in a new tab)

Review: Magnesium Sheet Alloy Development for Room Temperature Forming (this opens in a new tab)

Biotemplating of a Highly Porous Cellulose–Silica Composite from Apium graveolens by a Low-Toxicity Sol–Gel Technique (this opens in a new tab)

Artificial Neural Networks Framework for Detection of Defects in 3D-Printed Fiber Reinforcement Composites (this opens in a new tab)

Automated Image Processing Workflow for Morphological Analysis of Fluorescence Microscopy Cell Images (this opens in a new tab)

Refining of Secondary Aluminum: Important Chemical Factors (this opens in a new tab)

Alternating-Current Electrophoretic Deposition of Spinel Coatings on Porous Metallic Substrates for Solid Oxide Fuel Cell Applications (this opens in a new tab)

Development of Aerospace Materials Using Integrated Numerical and Physical Simulation (this opens in a new tab)

Review and Preliminary Investigation into Fuel Loss from Cermets Composed of Uranium Nitride and a Molybdenum-Tungsten Alloy for Nuclear Thermal Propulsion Using Mesoscale Simulations (this opens in a new tab)

A Multi-modal Data Merging Framework for Correlative Investigation of Strain Localization in Three Dimensions (this opens in a new tab)

Carbide-Free Bainite Transformations Above and Below Martensite Start Temperature Investigated by In-Situ High-Energy X-Ray Diffraction (this opens in a new tab)

Manufacturability of Ti-Al-4V Hollow-Walled Lattice Struts by Laser Powder Bed Fusion (this opens in a new tab)

Demonstration of a High-Throughput Tensile Testing Technique Using Femtosecond Laser-Fabricated Tensile Bars in AISI 316 and Additively Manufactured Grade 91 Steel (this opens in a new tab)

Additive Manufacturing of NiTi Shape Memory Alloy for Biomedical Applications: Review of the LPBF Process Ecosystem (this opens in a new tab)

Developments in Thermodynamic Models of Deposit-Induced Corrosion of High-Temperature Coatings (this opens in a new tab)
 

2020

Joining Technologies for Metal Additive Manufacturing in the Energy Industry (this opens in a new tab)

Machine Learning-Aided Parametrically Homogenized Crystal Plasticity Model (PHCPM) for Single Crystal Ni-Based Superalloys (this opens in a new tab)

Laser Powder Bed Fusion Parameter Selection via Machine-Learning-Augmented Process Modeling (this opens in a new tab)

Multiscale modelling of defect phenomena in Platinum using machine learning of force fields (this opens in a new tab)

ICME Approach to Determining Critical Pore Size of IN718 Produced by Selective Laser Melting (this opens in a new tab)

Listening to Radiation Damage In Situ: Passive and Active Acoustic Techniques (this opens in a new tab)

Recent Advances in Mitigation of Whiskers from Electroplated Tin (this opens in a new tab)

Influence of Gas Flow Speed on Laser Plume Attenuation and Powder Bed Particle Pickup in Laser Powder Bed Fusion (this opens in a new tab)

Helical and Bouligand Porous Scaffolds Fabricated by Dynamic Low Strength Magnetic Field Freeze Casting (this opens in a new tab)

Cryogenic Stress-Driven Grain Growth Observed via Microcompression with in situ Electron Backscatter Diffraction (this opens in a new tab)

A Brief Review of Fly Ash as Reinforcement for Composites with Improved Mechanical and Tribological Properties (this opens in a new tab)

Isothermal Continuous Equal Channel Angular Pressing of Magnesium Alloy AZ31 (this opens in a new tab)

Cold Spray Deposition of Thermoelectric Materials (this opens in a new tab)

Powder Casting: Producing Bulk Metal Components from Powder Without Compaction (this opens in a new tab)

Electromagnetic Effects on Solidification Defect Formation in Continuous Steel Casting (this opens in a new tab)

Dross Formation in Aluminum Melts During the Charging of Beverage Can Scrap Bales with Different Densities Using Various Thermal Pretreatments (this opens in a new tab)

Rate Theory Model of Irradiation-Induced Solute Clustering in b.c.c. Fe-Based Alloys (this opens in a new tab)

Influence of Induced Convection on Transformation Kinetics During Rapid Solidification of Steel Alloys: The Retained Damage Model (this opens in a new tab)
 

2019

The Effect of Cooling Rate on High-Temperature Precipitation in a Powder-Metallurgy, Gamma/Gamma-Prime Nickel-Base Superalloy (this opens in a new tab)

From Wire to Seamless Flow-Formed Tube: Leveraging the Combination of Wire Arc Additive Manufacturing and Metal Forming (this opens in a new tab)

Characterization of Additive Manufacturing for Process Tubing (this opens in a new tab)

Powder Recycling Effects on the Tensile and Fatigue Behavior of Additively Manufactured Ti-6Al-4V Parts (this opens in a new tab)

The Interface Between Degradable Mg and Tissue (this opens in a new tab)

Repeatedly Applied Peptide Film Kills Bacteria on Dental Implants (this opens in a new tab)

Strain Rate Dependent Mechanical Properties of TWIP Steel (this opens in a new tab)

Anatase TiO2 Nanotubes-Aggregated Porous Microspheres for Ti Foil-Based Quasi-Solid State Dye-Sensitized Solar Cells with Improved Photo-voltaic Performance (this opens in a new tab)

Recent development of graphene-based ink and other conductive-material-based inks for flexible electronics (this opens in a new tab)

In Situ Study of the Stress Relaxation During Aging of Nickel-Base Superalloy Forgings (this opens in a new tab)

Alloy Design and Processing Design of Magnesium Alloys Using 2nd Phases (this opens in a new tab)

Benchmark for Tap-Hole Lifecycle Management Practices in Silicomanganese Production When Submerged Arc Furnace Technology of Circular Design is Applied (this opens in a new tab)

Predicting Microstructure-Sensitive Fatigue-Crack Path in 3D Using a Machine Learning Framework (this opens in a new tab)

Development of Fe-9Cr Alloy via High-Energy Ball Milling and Spark Plasma Sintering (this opens in a new tab)

Advanced Manufacturing for Nuclear Energy (this opens in a new tab)

Multiscale Computational Strategies for Heterogeneous Materials with Defects: Coupling Modeling with Experiments and Uncertainty Quantification (this opens in a new tab)

The Sandy Desilication Product Process Concept (this opens in a new tab)

Selective Laser Melting of Al0.3CoCrFeNi High-Entropy Alloy: Printability, Microstructure, and Mechanical Properties (this opens in a new tab)

Integrated Simulation Framework for Additively Manufactured Ti-6Al-4V: Melt Pool Dynamics, Microstructure, Solid-State Phase Transformation, and Microelastic Response (this opens in a new tab)

Characterization of Plastic Deformation in Lath Martensitic Steel by Micro-pillar Compression Focused on Sub-block and Lath Boundaries (this opens in a new tab)

Improved Tolerance of Lanthanum Nickelate (La2NiO4+δ) Cathodes to Chromium Poisoning Under Current Load in Solid Oxide Fuel Cells (this opens in a new tab)

Phonon Transport Across Coherent and Incoherent Interfaces (this opens in a new tab)

Packing Changes in Melting, Freezing, and Coalescence of Titanium Nanoparticles from Atomic Simulations (this opens in a new tab)

Disassembly Automation for Recycling End-of-Life Lithium-Ion Pouch Cells (this opens in a new tab)

A Study on the Performance of Dye Sensitized Solar Cells Using Extract from Wrightia tinctoria R.Br. as Photosensitizers (this opens in a new tab)

 

2018

Integrating Fiber Optic Strain Sensors into Metal Using Ultrasonic Additive Manufacturing (this opens in a new tab)

Achieving Functionally Graded Material Composition Through Bicontinuous Mesostructural Geometry in Material Extrusion Additive Manufacturing (this opens in a new tab)

Effects of Testing Method on Stretch-Flangeability of Dual-Phase 980/1180 Steel Grades (this opens in a new tab)

Data-Driven Correlation Analysis Between Observed 3D Fatigue-Crack Path and Computed Fields from High-Fidelity, Crystal-Plasticity, Finite-Element Simulations (this opens in a new tab)

Damascus Steel Revisited (this opens in a new tab)

Corrosion of Structural Alloys in High-Temperature Molten Fluoride Salts for Applications in Molten Salt Reactors (this opens in a new tab)

Nanoscale Solute Partitioning and Carbide Precipitation in a Multiphase TRIP Steel Analyzed by Atom Probe Tomography (this opens in a new tab)

A Review of Nanoporous Metals in Interconnects (this opens in a new tab)

Redefining the β-Phase Stability in Ti-Nb-Zr Alloys for Alloy Design and Microstructural Prediction (this opens in a new tab)

PRISMS: An Integrated, Open-Source Framework for Accelerating Predictive Structural Materials Science (this opens in a new tab)

Variables Applicable to Benchmarking of Tap-Hole Life-Cycle Management Practices in Coke-Bed-Based Ferroalloy Production (this opens in a new tab)

Application of ICME to Engineer Fatigue-Resistant Ni-Base Superalloys Microstructures (this opens in a new tab)

Corrosion Characteristics of Laser-Engineered Net Shaping Additively-Manufactured 316L Stainless Steel (this opens in a new tab)

Removal of Antimony and Bismuth from Copper Electrorefining Electrolyte: Part II—An Investigation of Two Proprietary Solvent Extraction Extractants (this opens in a new tab)

Numerical Assessment of a Filtration Experiment Influenced by Microscale Carbon Monoxide Bubbles Arising in Steel Melt (this opens in a new tab)

2017

Mechanical Characterization of Mesoscale Interfaces Using Indentation Techniques (this opens in a new tab)

Airborne Emissions from Si/FeSi Production (this opens in a new tab)

Computer Vision and Machine Learning for Autonomous Characterization of AM Powder Feedstocks (this opens in a new tab)

Strategy for Texture Management in Metals Additive Manufacturing (this opens in a new tab)

Effect of Pre-annealing on Sintering of Stainless Steel Fiber Felt (this opens in a new tab)

Identifying Structure–Property Relationships Through DREAM.3D Representative Volume Elements and DAMASK Crystal Plasticity Simulations: An Integrated Computational Materials Engineering Approach (this opens in a new tab)

Submerged Gas Jet Penetration: A Study of Bubbling Versus Jetting and Side Versus Bottom Blowing in Copper Bath Smelting (this opens in a new tab)

An Industrial Perspective on Environmentally Assisted Cracking of Some Commercially Used Carbon Steels and Corrosion-Resistant Alloys (this opens in a new tab)

Toward Low-Cost, High-Energy Density, and High-Power Density Lithium-Ion Batteries (this opens in a new tab)

Crystallographic Orientation Effect on Electromigration in Ni-Sn Microbump (this opens in a new tab)

Review of the Methods for Production of Spherical Ti and Ti Alloy Powder (this opens in a new tab)

A Comparative Study of Electrolyte Flow and Slime Particle Transport in a Newly Designed Copper Electrolytic Cell and a Laboratory-Scale Conventional Electrolytic Cell (this opens in a new tab)

Strong and ductile non-equiatomic high-entropy alloys: Design, processing, microstructure and mechanical properties (this opens in a new tab)

High entropy alloys - a current evaluation of founding ideas, core effects and exploring 'non-linear alloys' (this opens in a new tab)

Criticality in Bulk Metallic Glass Constituent Elements (this opens in a new tab)

Nanocrystalline Aluminum Truss Cores for Lightweight Sandwich Structures (this opens in a new tab)

New Development in Selective Laser Melting of Ti–6Al–4V: A Wider Processing Window for the Achievement of Fully Lamellar α + β Microstructures (this opens in a new tab)