Journal of Materials Engineering and Performance - ASM Top Cited Articles 2021-2022

1. Failure Analysis of a Working Roll Under the Influence of the Stress Field Due to Hot Rolling Process (this opens in a new tab)

2. Investigation of Anticorrosion and Mechanical Properties of Azole Functionalized Graphene Oxide Encapsulated Epoxy Coatings on Mild Steel (this opens in a new tab)

3. Mechanical Fractography and Worn Surface Analysis of Nanographite and ZrO2-Reinforced Al7075 Alloy Aerospace Metal Composites (this opens in a new tab)

4. Prognostics Analysis of Rolling Bearing Based on Bi-Directional LSTM and Attention Mechanism (this opens in a new tab)

5. Free Vibration Analysis of Composite Structures Using Semi-Analytical Finite Strip Method (this opens in a new tab)

6. Analysis of the Adhesive Damage for Different Patch Shapes in Bonded Composite Repair of Corroded Aluminum Plate Under Thermo-Mechanical Loading (this opens in a new tab)

7. Elaeocarpus Seed Extraction and Their Impact as a Corrosion Inhibitor for Mild Steel Submerged in HCl Wash Solution: Insight from Experimental, Mathematical, and Theoretical Views (this opens in a new tab)

8. Risk Analysis of Equipment Failure through Failure Mode and Effect Analysis and Fault Tree Analysis (this opens in a new tab)

9. The Effect of Core Shape on the Bending Response of Sandwich Panels with Filled and Unfilled Sine and Square Corrugated Cores (this opens in a new tab)

10. Study of Defects in the Petrochemical Storage Tank Floor using the Magnetic Flux Leakage (MFL) Technique (this opens in a new tab)

11. Microstructure, Mechanical Behavior and Tensile Fractography of 90-Micron-Sized Titanium Carbide Particles Reinforced Al2219 Alloy Die Cast Metal Composites (this opens in a new tab)

12. Experimental and Numerical Study of the Effect of Patch Shape for Notched Cracked Composite Structure Repaired by Composite Patching (this opens in a new tab)

13. Classification of Surface Defects on Steel Strip Images using Convolution Neural Network and Support Vector Machine (this opens in a new tab)

14. Developing a Comprehensive Technique for Investigating Hazmat Transport Accidents (this opens in a new tab)

15. Corrosion Under Insulation Examination to Prevent Failures in Equipment at a Petrochemical Plant (this opens in a new tab)

16. Development of Fatigue Machine to Accommodate the Application of Overloads During Fatigue Crack Propagation Tests of Polymeric Materials (this opens in a new tab)

17. Experimental Study on Frictional Pairs of Piston Pumps (this opens in a new tab)

18. Tailings Dam Failures: A Historical Analysis of the Risk (this opens in a new tab)

19. Failure Analysis of Boiler Water Wall Tube: A Case Study from Thermal Power Plant (this opens in a new tab)

20. Time-Dependent Reliability Analysis of Composite Repaired Pipes Subjected to Multiple Failure Modes (this opens in a new tab)

21. Impact, Tensile and Fatigue Failure Analysis of Boron Carbide Particles Reinforced Al-Mg-Si (Al6061) Alloy Composites (this opens in a new tab)

22. Cavitation Erosion of Ni-Based Superalloys Manufactured by Forging and Additive Manufacturing (this opens in a new tab)

23. MODWT and VMD Based Intelligent Gearbox Early Stage Fault Detection Approach (this opens in a new tab)

24. Assessment of Cooling Water and Spacing Sensitivities for Fire Propagation Prevention in Cylindrical Fuel Tank Farms (this opens in a new tab)

25. Fractal Dimensions of a Propagating Fatigue Crack in Metallic Materials (this opens in a new tab)

1. Comparison of the Weldability of AA6061-T6 Joint under Different Friction Stir Welding Conditions (this opens in a new tab)

2. Structural, Elastic Moduli, and Radiation Shielding of SiO2-TiO2-La2O3-Na2O Glasses Containing Y2O3 (this opens in a new tab)

3. Defects in Metal Additive Manufacturing Processes (this opens in a new tab)

4. Mechanical Reliability and In Vitro Bioactivity of 3D-Printed Porous Polylactic Acid-Hydroxyapatite Scaffold (this opens in a new tab)

5. Development of Biomedical Implants through Additive Manufacturing: A Review (this opens in a new tab)

6. Characterization of Friction Stir-Welded Polylactic Acid/Aluminum Composite Primed through Fused Filament Fabrication (this opens in a new tab)

7. High-Performance Polyamide/Carbon Fiber Composites for Fused Filament Fabrication: Mechanical and Functional Performances (this opens in a new tab)

8. Effects of Post-processing on the Surface Finish, Porosity, Residual Stresses, and Fatigue Performance of Additive Manufactured Metals: A Review (this opens in a new tab)

9. Effect of Multiwalled Carbon Nanotubes on Improvement of Fracture Toughness of Spark-Plasma-Sintered Yttria-Stabilized Zirconia Nanocomposites (this opens in a new tab)

10. Friction Spot Extrusion Welding on Dissimilar Materials AA2024-T3 to AA5754-O: Effect of Shoulder Plunge Depth (this opens in a new tab)

11. Influence of Process Parameters on the Properties of Additively Manufactured Fiber-Reinforced Polymer Composite Materials: A Review (this opens in a new tab)

12. Microstructural Features and Mechanical Integrity of Wire Arc Additive Manufactured SS321/Inconel 625 Functionally Gradient Material (this opens in a new tab)

13. Wire Arc Additive Manufacturing: A Comprehensive Review and Research Directions (this opens in a new tab)

14. Microstructure and Mechanical Properties of Ti-6Al-4V Manufactured by Selective Laser Melting after Stress Relieving, Hot Isostatic Pressing Treatment, and Post-Heat Treatment (this opens in a new tab)

15. Insight into the Mechanical Properties and Fracture Behavior of Pt3Al Coating by Experiment and Theoretical Simulation (this opens in a new tab)

16. 3D-Printed Ti6Al4V Scaffolds with Graded Triply Periodic Minimal Surface Structure for Bone Tissue Engineering (this opens in a new tab)

17. Application of the Hot Press Method to Produce New Mg Alloys: Characterization, Mechanical Properties, and Effect of Al Addition (this opens in a new tab)

18. Microstructural Evolution and Mechanical Properties of Al0.5CoCrFeNi High-Entropy Alloy after Cold Rolling and Annealing Treatments (this opens in a new tab)

19. Integrated Fuzzy Analytic Hierarchy Process and Technique for Order of Preference by Similarity to Ideal Solution for Additive Manufacturing Printer Selection (this opens in a new tab)

20. 3D-Printed Objects for Multipurpose Applications (this opens in a new tab)

21. Effect of Friction Stir Processing on Mechanical Properties and Wear Resistance of Tungsten Inert Gas Welded Joint of Dissimilar Aluminum Alloys (this opens in a new tab)

22. Optimization and Fabrication of Customized Scaffold Using Additive Manufacturing to Match the Property of Human Bone (this opens in a new tab)

23. First-Principles Investigation of the Structural, Mechanical, and Thermodynamic Properties of Hexagonal and Cubic MoAl5 Alloy (this opens in a new tab)

24. Effect of Fillers and Autogenous Welding on Dissimilar Welded 316L Austenitic and 430 Ferritic Stainless Steels (this opens in a new tab)

25. Statistical Analysis of the Effect of the Cutting Tool Coating Type on Sustainable Machining Parameters (this opens in a new tab)

1. Microstructural Development in As Built and Heat Treated IN625 Component Additively Manufactured by Laser Powder Bed Fusion (this opens in a new tab)

2. Effect of Cooling Rate on the Phase Formation of AlCoCrFeNi High-Entropy Alloy (this opens in a new tab)

3. Local Ordering Tendency in Body-Centered Cubic (BCC) Multi-Principal Element Alloys (this opens in a new tab)

4. Thermodynamics and Chemical Ordering of Liquid Cu-Hf-Ni-Ti-Zr Alloys (this opens in a new tab)

5. New Insights into Phase Equilibria of the Sb-Sn System (this opens in a new tab)

6. Phase Equilibria in the Ti-Rich Part of the Ti-Al-Nb System-Part I: Low-Temperature Phase Equilibria Between 700 and 900 degrees C (this opens in a new tab)

7. Stability and Thermodynamics Properties of CrFeNiCoMn/Pd High Entropy Alloys from First Principles (this opens in a new tab)

8. Stability of High Entropy Alloys to Spinodal Decomposition (this opens in a new tab)

9. Additive Manufacturing of High-Entropy Alloys: Microstructural Metastability and Mechanical Behavior (this opens in a new tab)

10. Influence of 5 at.%Al-Additions on the FCC to BCC Phase Transformation in CrFeNi Concentrated Alloys (this opens in a new tab)

11. Investigation on the Phase Relationship and Solidification Processes of Mg-rich Mg-Mn-Y Alloys (this opens in a new tab)

12. Ab Initio Modeling of fcc Fe-Co-Cr-Ni High Entropy Alloys with Full Composition Range (this opens in a new tab)

13. Thermal Stability of Medium- and High-Entropy Alloys of 3d-Transition Metals (this opens in a new tab)

14. Measurement of Interdiffusion and Tracer Diffusion Coefficients in FCC Co-Cr-Fe-Ni Multi-Principal Element Alloy (this opens in a new tab)

15. Computational Assessment of Novel Predicted Compounds in Ni-Re Alloy System (this opens in a new tab)

16. Phase Relations in the ZrO2-MgO-FeOx System: Experimental Data and Assessment of Thermodynamic Parameters (this opens in a new tab)

17. High-Temperature Area of the Fe-Ni-Co-Cu Phase Diagram: Experimental Study and Computer Design (this opens in a new tab)

18. Experimental Investigation and Thermodynamic Modeling of the Phase Equilibria in the Cu-Nb-Ni Ternary System (this opens in a new tab)

19. Phase Equilibria in the Al-Cr-Co System in the Range of Compositions 0-70 at.% Al (this opens in a new tab)

20. Insight into Phase Stability in the Mg-Pt System. The Ab Initio Calculations (this opens in a new tab)

21. Phase Equilibria in the Fe-Al-Nb(-B) System at 700 degrees C (this opens in a new tab)

22. A Third Generation Calphad Description of Fe: Revisions of Fcc, Hcp and Liquid (this opens in a new tab)

23. Phase Equilibria in the Ti-Zr-Sn System (this opens in a new tab)

24. Zentropy Theory for Positive and Negative Thermal Expansion (this opens in a new tab)

25. What is the Enthalpy Contribution to the Stabilization of the Co–Cr–Fe–Mn–Ni Faced-centered Cubic Solid Solution? (this opens in a new tab)

1. Microstructure and Tribological Properties of Plasma-Sprayed CoCrFeNi-based High-Entropy Alloy Coatings Under Dry and Oil-Lubricated Sliding Conditions (this opens in a new tab)

2. Perspectives on Environmental Barrier Coatings (EBCs) Manufactured via Air Plasma Spray (APS) on Ceramic Matrix Composites (CMCs): A Tutorial Paper (this opens in a new tab)

3. Sliding Wear of Conventional and Suspension Sprayed Nanocomposite WC-Co Coatings: An Invited Review (this opens in a new tab)

4. Microstructure and Properties of Al2O3-13wt.%TiO2-Reinforced CoCrFeMnNi High-Entropy Alloy Composite Coatings Prepared by Plasma Spraying (this opens in a new tab)

5. Microstructural and Tribological Behavior of Thermal Spray CrMnFeCoNi High Entropy Alloy Coatings (this opens in a new tab)

6. Effect of Coating Thickness on the Slurry Erosion Resistance of HVOF-Sprayed WC-10Co-4Cr Coatings (this opens in a new tab)

7. Thermal Spray Copper Alloy Coatings as Potent Biocidal and Virucidal Surfaces (this opens in a new tab)

8. Size Effects of Brittle Particles in Aerosol Deposition-Molecular Dynamics Simulation (this opens in a new tab)

9. A Self-Consistent Scheme for Understanding Particle Impact and Adhesion in the Aerosol Deposition Process (this opens in a new tab)

10. Development of Highly Durable Superhydrophobic Coatings by One-Step Plasma Spray Methodology (this opens in a new tab)

11. Prediction of Particle Properties in Plasma Spraying Based on Machine Learning (this opens in a new tab)

12. Ablative Property and Mechanism of ZrC-TaC/ZrC-SiC Coatings on C/C Composites under Different Heat Fluxes (this opens in a new tab)

13. Thermal Effects in Sn Coating on a Carbon Fiber Reinforced Plastic by Cold Spraying (this opens in a new tab)

14. A Numerical Approach to Study the Oxide Layer Effect on Adhesion in Cold Spray (this opens in a new tab)

15. Numerical Modeling of Bond Formation in Polymer Surface Metallization Using Cold Spray (this opens in a new tab)

16. Plasma-Sprayed Graphene Nanosheets/ZnO/Al2O3 Coatings with Highly Efficient Microwave Absorption Properties (this opens in a new tab)

17. Comparison of Micro-nano FeCoNiCrAl and FeCoNiCrMn Coatings Prepared from Mechanical Alloyed High-entropy Alloy Powders (this opens in a new tab)

18. Effects of Particle Size on the Microstructure and Mechanical Properties of HVAF-Sprayed Al-Based Quasicrystalline Coatings (this opens in a new tab)

19. Benefits of Hydrogen in a Segmented-Anode Plasma Torch in Suspension Plasma Spraying (this opens in a new tab)

20. Sliding Wear Behavior of the Nanoceria-Doped AlCrFeCoNi High-Entropy Alloy Coatings Deposited by Air Plasma Spraying Technique (this opens in a new tab)

21. Microstructural, Mechanical and Wear Behavior of HVOF and Cold-Sprayed High-Entropy Alloys (HEAs) Coatings (this opens in a new tab)

22. Evaluation of New High Entropy Alloy as Thermal Sprayed Bondcoat in Thermal Barrier Coatings (this opens in a new tab)

23. Predicted Anode Arc Attachment by LTE (Local Thermodynamic Equilibrium) and 2-T (Two-Temperature) Arc Models in a Cascaded-Anode DC Plasma Spray Torch (this opens in a new tab)

24. Establishing a Cold Spray Particle Deposition Window on Polymer Substrate (this opens in a new tab)

25. Influence of Plasma Transferred Arc Remelting on Microstructure and Properties of PTAW-Deposited Ni-Based Overlay Coating (this opens in a new tab)

1. Experimental Study on Micro-Friction Stir Welding of Dissimilar Butt Joints Between Al 1050 and Pure Copper (this opens in a new tab)

2. Development of an Empirical Model on Melt Pool Variation in Laser Foil Printing Additive Manufacturing Process Using Statistical Analysis (this opens in a new tab)

3. Microstructural Development in Inconel 718 Nickel-Based Superalloy Additively Manufactured by Laser Powder Bed Fusion (this opens in a new tab)

4. Effect of Strain Rate on Mechanical Behavior and Microstructure Evolution of Ti-Based T110 Alloy (this opens in a new tab)

5. Mechanical Properties And Microstructure Evolution in Arc Stud Welding Joints of AISI 1020 with AISI 316L and AISI 304 (this opens in a new tab)

6. Microstructural and Electrochemical Characterization of Zinc Coating onto Low Carbon Steel Substrate (this opens in a new tab)

7. Creep Behaviors Evaluation of IN738 Superalloy Welded by Pulsed Nd:YAG Laser Through the Small Punch Creep Test (this opens in a new tab)

8. Interlayers in Resistance Spot-Welded Lap Joints: A Critical Review (this opens in a new tab)

9. Static and Fatigue Characteristics of Heat-Treated Ti-6Al-3Mo-2Zr-2 Sn-2Nb-1.5Cr-0.1Si Alloy (this opens in a new tab)

10. X-ray Diffraction Analysis of a Class of AlMgCu Alloy Using Williamson-Hall and Scherrer Methods (this opens in a new tab)

11. High-Temperature Oxidation Studies of Plasma-Sprayed NiCrAlY/TiO2 and NiCrAlY/Cr2O3/YSZ Cermet Composite Coatings on MDN-420 Special Steel Alloy (this opens in a new tab)

12. Fretting Wear and Scratch Resistance of Cold-Sprayed Pure Cu and Ti (this opens in a new tab)

13. Investigation on Microstructural and Mechanical Properties of Microwave Welded Al6061-SiC-Graphite Hybrid Metal Matrix Composites (this opens in a new tab)

14. Revealing the Hierarchical Microstructure of Innovative Additively Manufactured Metal Parts with Conventional Light Microscopy (this opens in a new tab)

15. Flow Curve and Microstructure Analysis of a ZK60 Magnesium Alloy during Hot Compression Tests (this opens in a new tab)

16. High Strain Behaviour of Ultrafine-grained Aluminium Alloys Processed Through the Severe Plastic Deformation Techniques: A Review (this opens in a new tab)

17. Influence of Microalloying Additions (Nb, Ti, Ti/B, V and Mo) on the Microstructure of TWIP Steels (this opens in a new tab)

18. Influence of Grain Refiner, Modifier and Graphene on the Dry Sliding Wear of Hypereutectic Al-Si Alloys (this opens in a new tab)

19. Effect of Initial alpha-Phase Morphology on Microstructure, Mechanical Properties, and Work-Hardening Instability During Heat Treatment of TC21 Ti-Alloy (this opens in a new tab)

20. A Study on the Phase Formation and Physical Characteristics of Hot-Dip Aluminized Coating at 750 degrees C (this opens in a new tab)

21. Microstructure Analysis of High-Density 316L Stainless Steel Manufactured by Selective Laser Melting Process (this opens in a new tab)

22. Behavior of Carbon Steel Machine Elements in Acidic Environment Surface Texture Using Abbott Firestone Curve (this opens in a new tab)

23. Synthesis and Characterization of Al-SiC Composite Coatings on 316L Stainless Steel Fabricated via Laser Cladding Technique (this opens in a new tab)

24. Effects of Grain Refiners and Cooling Rates on the Microstructure and Tensile Properties of A357Alloy (this opens in a new tab)

25. Corrosion of a Spark Plasma Sintered Fe-Cr-Mo-B-C Alloy in Hydrochloric Acid (this opens in a new tab)

1. Processing and Scalability of NiTiHf High-Temperature Shape Memory Alloys (this opens in a new tab)

2. Martensite Transformation and Superelasticity at High Temperature of (TiHfZr)(74)(NbTa)(26) High-Entropy Shape Memory Alloy (this opens in a new tab)

3. Unraveling Frequency Effects in Shape Memory Alloys: NiTi and FeMnAlNi (this opens in a new tab)

4. Structure and Superelasticity of Novel Zr-Rich Ti-Zr-Nb Shape Memory Alloys (this opens in a new tab)

5. Lattice Defects Generated by Cyclic Thermomechanical Loading of Superelastic NiTi Wire (this opens in a new tab)

6. On the Influence of Thermal History on the Martensitic Transformation in Ti-24Nb-4Zr-8Sn (wt%) (this opens in a new tab)

7. Applying Full-Field Measurement Techniques for the Thermomechanical Characterization of Shape Memory Alloys: A Review and Classification (this opens in a new tab)

8. Effect of Crystallographic Orientation and Grain Boundaries on Martensitic Transformation and Superelastic Response of Oligocrystalline Fe-Mn-Al-Ni Shape Memory Alloys (this opens in a new tab)

9. Fatigue Crack Growth in Austenitic and Martensitic NiTi: Modeling and Experiments (this opens in a new tab)

10. A Top-Down Characterization of NiTi Single-Crystal Inelastic Properties within Confidence Bounds through Bayesian Inference (this opens in a new tab)

11. Structure and Properties of Ti-50.2Ni Alloy Processed by Laser Powder Bed Fusion and Subjected to a Combination of Thermal Cycling and Heat Treatments (this opens in a new tab)

12. Shape Memory Alloy-Enabled Expandable Space Habitat-Case Studies for Second CASMART Student Design Challenge (this opens in a new tab)

13. Multi-objective Optimization of Cutting Parameters for Machining Process of Ni-Rich NiTiHf High-Temperature Shape Memory Alloy Using Genetic Algorithm (this opens in a new tab)

14. Effect of Specimen Thickness on the Fracture Toughness of a NiTi Shape Memory Alloy (this opens in a new tab)

15. Pre-strain and Mean Strain Effects on the Fatigue Behavior of Superelastic Nitinol Medical Devices (this opens in a new tab)

16. Coherent Precipitates as a Condition for Ultra-Low Fatigue in Cu-Rich Ti53.7Ni24.7CU21.6 Shape Memory Alloys (this opens in a new tab)

17. Effect of Ni/Ti Ratio and Ta Content on NiTiTa Alloys (this opens in a new tab)

18. Production and Mechanical Properties of Cu-Al-Ni-Be Shape Memory Alloy Thin Ribbons Using a Cold Co-Rolled Process (this opens in a new tab)

19. Effect of Nickel Content on Processing of Ni-Rich NiTiHf High-Temperature Shape Memory Alloys (this opens in a new tab)

20. Quantification of Shape Memory Alloy Damping Capabilities Through the Prediction of Inherent Behavioral Aspects (this opens in a new tab)

21. Valence Electron Ratio for Design of Shape Memory Alloys with Desired Phase Transformation Temperatures (this opens in a new tab)

22. The Build Orientation Dependency of NiTi Shape Memory Alloy Processed by Laser Powder Bed Fusion (this opens in a new tab)

23. A Shape Memory Alloy Constitutive Model with Polynomial Phase Transformation Kinetics (this opens in a new tab)

24. Role of Structural Heredity in Aging-Induced Microstructure and Transformation Behavior in Ni-rich Titanium Nickelide (this opens in a new tab)

25. Nitinol Release of Nickel under Physiological Conditions: Effects of Surface Oxide, pH, Hydrogen Peroxide, and Sodium Hypochlorite (this opens in a new tab)