Skip to main content
Log in

Journal of Materials Engineering and Performance - Editor's Choice Articles

Highlights of 2023

Post-Process Treatments for Additive-Manufactured Metallic Structures: A Comprehensive Review (this opens in a new tab)

Additive Manufacturing in the Context of Repeatability and Reliability (this opens in a new tab)

Resistance of Quench and Partitioned Steels Against Hydrogen Embrittlement (this opens in a new tab)

On the Heat Treatment of Selective-Laser-Melted 316L  (this opens in a new tab)

Energy Absorption Characteristics of Fused Deposition Modeling 3D Printed Auxetic Re-entrant Structures: A Review (this opens in a new tab)

A Review of High-Strength Aluminum-Copper Alloys Fabricated by Wire Arc Additive Manufacturing: Microstructure, Properties, Defects, and Post-processing (this opens in a new tab)

Highlights of 2022

Robust Metal Additive Manufacturing Process Selection and Development for Aerospace Components (this opens in a new tab)

Microstructure, Mechanical Properties, and Martensitic Transformation in NiTi Shape Memory Alloy Fabricated Using Electron Beam Additive Manufacturing Technique (this opens in a new tab)

Corrosion, Corrosion Fatigue, and Protection of Magnesium Alloys: Mechanisms, Measurements, and Mitigation (this opens in a new tab)

Fabrication of Al/Mg Bimetallic Thin-Walled Ultrafine-Grained Tube by Severe Plastic Deformation (this opens in a new tab)

Material Characterization and Modeling for Finite Element Simulation of Press Hardening with AISI 420C (this opens in a new tab)

Residual Stress and Distortion during Quench Hardening of Steels: A Review (this opens in a new tab)

Highlights of 2021

Recent Progress in Beam-Based Metal Additive Manufacturing from a Materials Perspective: A Review of Patents (this opens in a new tab)

Data Science Techniques, Assumptions, and Challenges in Alloy Clustering and Property Prediction (this opens in a new tab)

A Comprehensive Examination of High-Temperature Hydrogen Attack—A Review of over a Century of Investigations (this opens in a new tab)

Characteristics of Metal Specimens Formed by Selective Laser Melting: A State-of-the-Art Review (this opens in a new tab)

Nanojoining with Ni Nanoparticles for Turbine Applications (this opens in a new tab)

Increasing the Productivity of Laser Powder Bed Fusion for Stainless Steel 316L through Increased Layer Thickness (this opens in a new tab)

Highlights of 2020

Rapid Tempering: Opportunities and Challenges (this opens in a new tab)

Mechanical Properties and Conductivity of Low-Pressure
Die-Cast 319 Aluminum Prepared with Hot Isostatic Pressing, Thermal Treatment, or Chemical Treatment (this opens in a new tab)


Smart Manufacturing Process of Carbon-Based Low-Dimensional Structures and Fiber-Reinforced Polymer Composites for Engineering Applications (this opens in a new tab)

Long-Term Creep Behavior of a CoCrFeNiMn High-Entropy Alloy (this opens in a new tab)

Interfacial Investigation of Explosion-Welded Titanium/Steel Bimetallic Plates (this opens in a new tab)

Superelastic Effect in NiTi Alloys Manufactured Using Electron Beam and Focused Laser Rapid Manufacturing Methods (this opens in a new tab)
 

Highlights of 2019

Investigation on Microsegregation of IN718 Alloy During Additive Manufacturing via Integrated Phase-Field and Finite-Element Modeling (this opens in a new tab)

Surface Treatment of Powder-Bed Fusion Additive Manufactured Metals for Improved Fatigue Life (this opens in a new tab)

Improved High-Temperature Aluminum Alloys Containing Cerium (this opens in a new tab)

Microstructural Analysis of Powder Metallurgy Tool Steels in the Context of Abrasive Wear Behavior: A New Computerized Approach to Stereology (this opens in a new tab)

The Effect of Boron Content on Wetting Kinetics in Si-B Alloy/h-BN System (this opens in a new tab)

Processing and Thermoelectric Properties of TiNiSn Materials: A Review (this opens in a new tab)

Highlights of 2018

Additive Manufacturing of Metallic Materials: A Review (this opens in a new tab)

A Review on Micro- and Nanoscratching/Tribology at High Temperatures: Instrumentation and Experimentation (this opens in a new tab)

Mechanical Properties of Advanced Gas-Cooled Reactor Stainless Steel Cladding After Irradiation (this opens in a new tab)

Fabrication and Properties of Composite Artificial Muscles Based on Nylon and a Shape Memory Alloy (this opens in a new tab)

Interaction Between Graphene-Coated SiC Single Crystal and Liquid Copper (this opens in a new tab)

Highlights of 2017

Slow Strain Rate Testing for Hydrogen Embrittlement Susceptibility of Alloy 718 in Substitute Ocean Water (this opens in a new tab)

High Damping of Lightweight TiNi-Ti2Ni Shape Memory Composites for Wide Temperature Range Usage (this opens in a new tab)

Homogenizing Advanced Alloys: Thermodynamic and Kinetic Simulations Followed by Experimental Results (this opens in a new tab)

Influences of Processing and Fatigue Cycling on Residual Stresses in a NiCrY-Coated Powder Metallurgy Disk Superalloy (this opens in a new tab)

Geometric Limitation and Tensile Properties of Wire and Arc Additive Manufacturing 5A06 Aluminum Alloy Parts (this opens in a new tab)

Highlights of 2016

Development of Custom 465® Corrosion-Resisting Steel for Landing Gear Applications (this opens in a new tab)

Alloying Element Nitride Development in Ferritic Fe-Based Materials Upon Nitriding: A Review (this opens in a new tab)

Mechanical Behavior and Microstructural Analysis of Extruded AZ31B Magnesium Alloy Processed by Backward Extrusion (this opens in a new tab)

Wetting Behavior and Reactivity Between AlTi6 Alloy and Carbon Nanotubes (this opens in a new tab)

Interlaboratory Study for Nickel Alloy 625 Made by Laser Powder Bed Fusion to Quantify Mechanical Property Variability (this opens in a new tab)

Highlights of 2015

Microstructure and Mechanical Behavior of High-Entropy Alloys (this opens in a new tab)

Site-Dependent Tension Properties of Inertia Friction-Welded Joints Made From Dissimilar Ni-based Superalloys (this opens in a new tab)

Novel Hybrid Ablative/Ceramic Layered Composite for Earth Re-entry Thermal Protection: Microstructural and Mechanical Performance (this opens in a new tab)

Surface Degradation of Ag/W Circuit Breaker Contacts During Standardized UL Testing (this opens in a new tab)

Phase Transformations and Crack Initiation in a High-Chromium Cast Steel Under Hot Compression Tests (this opens in a new tab)
 

Highlights of 2014

Metal Additive Manufacturing: A Review by W. Frazier (this opens in a new tab)

Innovative and Highly Productive Joining Technologies for Multi-Material Lightweight Car Body Structures (this opens in a new tab)

Evaluation of Spaceborne SiC Mirror Materials Using Samples Cut from the Periphery of a Mirror Body (this opens in a new tab)

Effect of Element Diffusion Through Metallic Networks During Oxidation of Type 321 Stainless Steel (this opens in a new tab)

Wind-Turbine Gear-Box Roller-Bearing Premature-Failure Caused by Grain-Boundary Hydrogen Embrittlement: A Multi-physics Computational Investigation (this opens in a new tab)

Highlights of 2013

Novel application of glass fibers recovered from waster printed circuit boards as sound and thermal insulation materials (this opens in a new tab)

Laser-Assisted Surface Modification of Alumina and Its Tribological Behavior (this opens in a new tab)

Simulation of stress and strain for induction hardening applications (this opens in a new tab)

Analytical Method for Forming Limit Diagram Prediction with Application to a Magnesium ZEK100-O Alloy (this opens in a new tab)

Electrode Erosion Observed in Electrohydraulic Discharges Used in Pulsed Sheet Metal Forming (this opens in a new tab)

Effects of PCB Substrate Surface Finish and Flux on Solderability of Lead-Free SAC305 Alloy (this opens in a new tab)

Testing and Analysis of Full-Scale Creep-Rupture Experiments on Inconel Alloy 740 Cold-Formed Tubing (this opens in a new tab)

The effect of residual stress on the distortion of gray iron brake disks (this opens in a new tab)

Mechanical and Metallurgical Evaluation of Carburized, Conventionally and Intensively Quenched Steels (this opens in a new tab)

Navigation