1. Tuning Physical Properties of NiFe2O4 and NiFe2O4@SiO2 Nanoferrites by Thermal Treatment (this opens in a new tab) | A. Bajorek et al. |
2. Hybrid Electron Beam Powder Bed Fusion Additive Manufacturing of Ti–6Al–4V: Processing, Microstructure, and Mechanical Properties (this opens in a new tab) | R. Tosi, E. Muzangaza, X. P. Tan, D. Wimpenny, M. M. Attallah |
3. The Constant-Stress, Constant-Heating-Rate Test: A Novel Method for Characterizing Transient Mechanical Behavior of Metallic Materials (this opens in a new tab) | S. L. Semiatin et al. |
4. Microstructure and Mechanical Properties of the Ductile Al–Ti–Mo–Nb–V Refractory High Entropy Alloys (this opens in a new tab) | Grzegorz Cieślak et al. |
5. A Scale-up Study on Chemical Segregation and the Effects on Tensile Properties in Two Medium Mn Steel Castings (this opens in a new tab) | T. W. J. Kwok, C. Slater, X. Xu, C. Davis, D. Dye |
6. Effect of Nucleant Particle Agglomeration on Grain Size (this opens in a new tab) | Feng Gao, Zhongyun Fan |
7. In Situ and Ex Situ TEM Analysis of the Copper Precipitation in Martensitic Steel (this opens in a new tab) | Margarita D. Bambach, Łukasz Szczepański, Andrzej M. Żak |
8. Influence of Strain Rate Sensitivity on Cube Texture Evolution in Aluminium Alloys (this opens in a new tab) | Elisa Cantergiani et al. |
9. On the Influence of Alloy Composition on the Additive Manufacturability of Ni-Based Superalloys (this opens in a new tab) | Joseph N. Ghoussoub et al. |
10. The Ductility and Shape-Memory Properties of Ni–Mn–Ga–Cu Heusler Alloys (this opens in a new tab) | Agnieszka Brzoza-Kos, Eduard Cesari, Maciej Jakub Szczerba |
11. Modeling and Simulation of Pore Formation in a Bainitic Steel During Creep (this opens in a new tab) | Felix Meixner, Mohammad Reza Ahmadi, Christof Sommitsch |
12. Non-uniform Grain Boundary Migration During Static Recrystallization: A Cellular Automaton Study (this opens in a new tab) | Fengxiang Lin, Mateusz Sitko, Lukasz Madej, Laurent Delannay |
13. Precipitation Kinetics During Post-heat Treatment of an Additively Manufactured Ferritic Stainless Steel (this opens in a new tab) | Chia-Ying Chou et al. |
14. Electron Beam Based Additive Manufacturing of Alloy 247 for Turbine Engine Application: From Research towards Industrialization (this opens in a new tab) | Markus Ramsperger, Simon Eichler |
15. In Situ Investigation of TCP Phase Formation, Stress Relaxation and γ/γ′ Lattice Misfit Evolution in Fourth Generation Single Crystal Ni-Base Superalloys by X-Ray High Temperature Diffraction (this opens in a new tab) | A. Bezold, H. J. Stone, C. M. F. Rae, S. Neumeier |
16. Mechanisms of Densification and Bonding in the Ultrasonic Consolidation of Aluminum Powder (this opens in a new tab) | Huang Huang, Teiichi Ando |
17. Optical Detection of Phase Transformations in Steels: An Innovative Method for Time-Efficient Material Characterization During Tailored Thermo-mechanical Processing of a Press Hardening Steel (this opens in a new tab) | Alexander Reitz, Olexandr Grydin, Mirko Schaper |
18. Alloy Design for Additive Manufacturing: Early-Stage Oxidation of Nickel-Based Superalloys (this opens in a new tab) | Joseph N. Ghoussoub et al. |
19. A Comparative Study of High Temperature Tensile and Creep Testing Between Standard and Miniature Specimens: Applicability and Limits (this opens in a new tab) | Yuanbo T. Tang et al. |
20. Quantifying Equiaxed vs Epitaxial Solidification in Laser Melting of CMSX-4 Single Crystal Superalloy (this opens in a new tab) | Runbo Jiang et al. |
21. Aluminum Cast Alloys Based on the Al–Ce–Si–Mg System: An Influence of Silicon on Crystallization, Phase Composition, and Tensile Properties (this opens in a new tab) | Frank Czerwinski, Babak Shalchi Amirkhiz |
22. Deformation Mechanisms Rationalisation to Design for Creep Resistance in Polycrystalline Ni-Based Superalloys (this opens in a new tab) | D. Barba et al. |
23. Hydrogen Diffusion and Trapping in Low-Alloy Tempered Martensitic Steels (this opens in a new tab) | L. Cupertino-Malheiros, A. Oudriss, F. Thébault, M. Piette, X. Feaugas |
24. Phase-Field Study of the History-Effect of Remelted Microstructures on Nucleation During Additive Manufacturing of Ni-Based Superalloys (this opens in a new tab) | Murali Uddagiri et al. |
25. Comparison of Microstructure Refinement in Wire-Arc Additively Manufactured Ti–6Al–2Sn–4Zr–2Mo–0.1Si and Ti–6Al–4V Built With Inter-Pass Deformation (this opens in a new tab) | A. E. Davis, A. E. Caballero, R. Biswal, S. Williams, P. B. Prangnell |