Skip to main content
Log in

Materials and Structures - RILEM Recommendations

RILEM Recommendations

Read Recommendations

Over 200 RILEM Technical Recommendations have been produced by RILEM Technical Committees. Many of these recommendations have been adopted in research and practice, and are used by international standardisation bodies, as a basis for their work. See the latest Recommendations here:

RILEM recommendation from TC 289-DCM: guideline for designing and operating long-term marine exposure sites (this opens in a new tab)

Recommendation of RILEM TC 281-CCC: Test method to determine the effect of uniaxial compression load and uniaxial tension load on concrete carbonation depth (this opens in a new tab)

RILEM TC 258-AAA: Recommendations for Avoiding Alkali Aggregate Reactions in Concrete – Performance Based Concept (this opens in a new tab)

Recommendation of RILEM TC 256-SPF on the method of testing concrete spalling due to fire: material screening test (this opens in a new tab)

Consisting of the following six papers:

Recommendations of RILEM TC 287-CCS: thermo-chemo-mechanical modelling of massive concrete structures towards cracking risk assessment (this opens in a new tab)

Recommendation of RILEM TC 271-ASC: New accelerated test procedure for the assessment of resistance of natural stone and fired-clay brick units against salt crystallization, May 2023 (this opens in a new tab)

Recommendation of RILEM TC 265-TDK, RILEM Standard: testing methods for determination of the double-K criterion for crack propagation in concrete using wedge-splitting tests and three-point bending beam tests, December 2021 (this opens in a new tab)

Recommendation of RILEM TC 264-RAP on the evaluation of asphalt recycling agents for hot mix asphalt, January 2022 (this opens in a new tab)

Recommendation of RILEM TC 261-CCF: test method to determine the flexural creep of fibre reinforced concrete in the cracked state (this opens in a new tab)

Recommendation of RILEM TC 260-RSC: testing sorption by superabsorbent polymers (SAP) prior to implementation in cement-based materials (this opens in a new tab)

Recommendation of RILEM TC 260-RSC: using superabsorbent polymers (SAP) to mitigate autogenous shrinkage (this opens in a new tab)

Recommendations of RILEM TC 260-RSC for using superabsorbent polymers (SAP) for improving freeze–thaw resistance of cement-based materials. (this opens in a new tab)

Recommendation of RILEM TC 258-AAA: RILEM AAR-0 outline guide to the use of RILEM methods in the assessment of the alkali-reactivity potential of concrete (this opens in a new tab)

Recommendation of RILEM TC 258-AAA: RILEM AAR-8: determination of potential releasable alkalis by aggregates in concrete (this opens in a new tab)

Recommendation of RILEM TC 258-AAA: RILEM AAR-10: determination of binder combinations for non-reactive mix design using concrete prisms–38 °C test method (this opens in a new tab)

Recommendation of RILEM TC 258-AAA: RILEM AAR-11: determination of binder combinations for non-reactive mix design or the resistance to alkali-silica reaction of concrete mixes using concrete prisms − 60 °C test method (this opens in a new tab)

Recommendation of RILEM TC 258-AAA: RILEM AAR-12: determination of binder combinations for non-reactive mix design or the resistance to alkali-silica reaction of concrete mixes using concrete prisms − 60 °C test method with alkali supply (this opens in a new tab)

Recommendation of RILEM TC 258-AAA: RILEM AAR-13: application of alkali-wrapping for concrete prism testing to assess the expansion potential of alkali-silica reaction (this opens in a new tab)

Recommendation of RILEM TC 256-SPF on the method of testing concrete spalling due to fire: material screening test (this opens in a new tab)

Recommendations of RILEM TC 252-CMB: relationship between laboratory short-term aging and performance of asphalt binder (this opens in a new tab) 

Recommendation of RILEM Technical Committee 250-CSM: Test method for Textile Reinforced Mortar to substrate bond characterization (this opens in a new tab)

Recommendation of RILEM TC 249-ISC on non destructive in situ strength assessment of concrete (this opens in a new tab)

Recommendation of RILEM TC 246-TDC: test methods to determine durability of concrete under combined environmental actions and mechanical load (this opens in a new tab)

Recommendation of RILEM TC 243-SGM: functional requirements for surface repair mortars for historic buildings (this opens in a new tab)

Recommendation of RILEM TC 242-MDC multi-decade creep and shrinkage of concrete: material model and structural analysis (this opens in a new tab)

Recommendation of RILEM TC 241-MCD on interface debonding testing in pavements (this opens in a new tab)

Recommendation of RILEM TC 238 SCM on hydration stoppage by solvent exchange for the study of hydrate assemblages (this opens in a new tab)

Recommendation of RILEM TC 238-SCM: determination of the degree of reaction of siliceous fly ash and slag in hydrated cement paste by the selective dissolution method (this opens in a new tab)

Recommendation of RILEM TC 237-SIB on fragmentation test for recycled asphalt (this opens in a new tab)

Recommendation of RILEM TC 237-SIB on affinity between aggregates and bituminous binders (this opens in a new tab)

Recommendation of RILEM TC 237-SIB: protocol for characterization of recycled asphalt (RA) materials for pavement applications (this opens in a new tab)

Recommendation of RILEM TC 237-SIB on cohesion test of recycled asphalt (this opens in a new tab)

Recommendation of RILEM TC 237-SIB on complex Poisson’s ratio characterization of bituminous mixtures (this opens in a new tab)

Recommendation of RILEM TC 236-BBM: characterisation testing of hemp shiv to determine the initial water content, water absorption, dry density, particle size distribution and thermal conductivity (this opens in a new tab)

Recommendation of RILEM TC 232-TDT: test methods and design of textile reinforced concrete (this opens in a new tab)

Recommendation of RILEM TC 218-SFC: Sonic methods for quality control of fresh cementitious materials* (this opens in a new tab)

Recommendation of RILEM TC 212-ACD: acoustic emission and related NDE techniques for crack detection and damage evaluation in concrete* (this opens in a new tab)

Recommendation of RILEM TC 212-ACD: acoustic emission and related NDE techniques for crack detection and damage evaluation in concrete* (this opens in a new tab)

Recommendation of RILEM TC 212-ACD: acoustic emission and related NDE techniques for crack detection and damage evaluation in concrete* (this opens in a new tab)

Recommendation of RILEM TC 200-HTC: mechanical concrete properties at high temperatures—modelling and applications (this opens in a new tab)

Recommendation of RILEM TC190-SBJ: development of recommendations on novel durability test methods for wet-applied curtain-wall sealants (this opens in a new tab)

Recommendation of RILEM TC 190-SBJ: service-life prediction of sealed building and construction joints (this opens in a new tab)

Recommendation of RILEM TC 190-SBJ: service-life prediction of sealed building and construction joints (this opens in a new tab)

Recommendation of RILEM TC 189-NEC ‘Non-destructive evaluation of the concrete cover’ “Comparative test—Part I—Comparative test of penetrability methods” (this opens in a new tab)




Navigation