I.M. Szilágyi, Budapest University of Technology and  Economics, Hungary
E-mail: imre.szilagyi@mail.bme.hu

A. Kállay-Menyhárd, Budapest University of Technology and Economics, Hungary
E-mail: AMenyhard@mail.bme.hu

Sophie Korda

E-mail: JTAC@akkrt.hu

G. Liptay (1932 – 2022)
, Budapest University of Technology and Economics, Hungary

Judit Simon
, Budapest University of Technology and Economics, Hungary
E-mail: lexicakiado@gmail.com

János Kristóf
, University of Pannonia, Hungary (Nanomaterials and composites, Material Science)

Omid Mahian
, School of Chemical Engineering and Technology, Xi'an Jiaotong University, Xi'an, China (Thermodynamics, Material Science)

Hafiz Muhammad Ali
, Mechanical Engineering Department, King Fahd University of Petroleum & Minerals (KFUPM), Saudi Arabia (heat transfer, condensation, boiling, nanofluids, phase change Materials, thermal systems, solar energy)
Aline Auroux, IRCELYON-CNRS, 2 Avenue Einstein, 69626 Villeurbanne, France
(Material Science)
Shyamala Bharadwaj, Retired from Bhabha Atomic Research Centre, India
(Calorimetry and Experimental Thermodynamics, Kinetics, Material Science)
Elena Vladimirovna Boldyreva, Novosibirsk State University, Russian Federation
(Bio- and Lifesciences, Pharmaceuticals, Material Science, Organic, Polymers)
Giovanna Bruni, School of Pharmacy of the University of Pavia, Italy (Bio- and Lifesciences, Pharmaceuticals)
Petru Budrugeac, Faculty of Chemistry – Bucharest University, Romania (Kinetics)
Éder Tadeu Gomes Cavalheiro, University of São Paulo at São Carlos Campus, Brazil
(Pharmaceuticals, Material Science, Inorganics, Polymers)
Ali J. Chamkha, Mechanical Engineering Department, Prince Sultan Endowment for Energy and Environment, Prince Mohammad Bin Fahd University, Kingdom of Saudi Arabia (multiphase fluid-particle dynamics, nanofluids dynamics, fluid flow in porous media, heat and mass transfer, magnetohydrodynamics and fluid-particle separatio)
Zsuzsanna Czégény, Institute of Materials and Environmental Chemistry, Research Centre for Natural Sciences, Hungarian Academy of Sciences, Hungary (Organics, Polymer)
Valeri A. Drebushchak, Novosibirsk State University, Department of Physics, Russian Federation (Calorimetry and Experimental Thermodynamics, Material Science, Inorganics and Geoscience, Theory and Instrumentation)
Patrice Estellé, Université Rennes 1, France (Calorimetry and Experimental Thermodyaics, Material Science)
Ray L. Frost, Queensland University of Technology, Australia (Material Science, Inorganic)
Farhad Gharagheizi, School of Chemical and Biomolecular Engineering, Georgia Institute of Technology, Atlanta, Georgia, USA (Material Science, Inorganics and Geoscience)
Concetta Giancola, Department of Pharmacy of University of Naples Federico II, Italy
(Bio- and Lifesciences, Pharmaceuticals)
Xing Jin, School of Architecture, Southeast University, Nanjing, China (heat transfer, thermal analysis, thermal conductivity, thermal energy storage)
Larry Judovits, Arkema Inc., USA (Polymers, Material Science, Thermal analysis, Theory and Instrumentation)
Alibakhsh Kasaeian, Department of Renewable Energies, Faculty of New Science and Technologies, University of Tehran, Tehran, Iran (Solar Energy, Nanofluids, Heat Transfer, Exergy, Energy Optimization, Energy Harvesting)
Tiit Kaljuvee, Laboratory of Inorganic Materials, Institute of Material and Environmental Technology, Tallinn University of Technology, Estonia (Material Science, Inorganics and Geoscience)
Katsumi Katoh, Faculty of Engineering, Fukuoka University, Japan (Material Science)
Wim P. C. de Klerk, TNO Defence, Safety and Security, The Netherlands (Material Science, Inorganics and Geoscience)
Mustafa Verşan Kök, Middle East Technical University – METU, Turkey (Kinetics, Inorganics and Geoscience)
Jiri Kucerik, Brno University of Technology, Czech Republic (Geoscience, Organics, Polymer, Pharmaceutical)
Vesa-Pekka Lehto, Materials Physics at University of Eastern Finland, Finland (Bio- and Lifescience, Pharmaceutical, Material Science)
Christopher Li, Drexel University, USA (Polymer)
Marek Liska, A. Dubček University of Trenčín, Slovakia (Thermodynamics)
Dénes Lőrinczy, Biophysical Department University of Pécs Faculty of Medicine, Hungary
(Bio- and Lifescience, Pharmaceutical)
György Marosi, Budapest University of Technology and Economics, Department of Organic Chemistry and Technology, Hungary (Polymers, Material Science)
Katalin Mészáros Szécsényi, University of Novi Sad, Faculty of Sciences, Department of Chemistry, Biochemistry, and Environment, Serbia (Pharmaceutical, Material Science)
Anna Michnik, University of Silesia in Katowice, Department of Medical Physics, A. Chełkowski Institute of Physics, The Silesian Centre for Education and Interdisciplinary Research, Poland
(Bio- and Lifesciences, Pharmaceutical)
Hussain A. Mohammed, Department of Chemical Engineering, Curtin University, Australia (Calorimetry and Experimental Thermodynamics; Theory and Instrumentation)
Subhash Chandra Mojumdar, Special Graduate Faculty, University of Guelph, Canada
(Bio- and Lifescience, Pharmaceutical, Calorimetry and Experimental Thermodynamics, Kinetics, Material Science, Inorganics and Geoscience, Organics, Polymers, Theory and Instrumentation)
Juan Carlos Moreno-Piraján, Department of Chemistry, Group of Porous Solids and Calorimetry, Universidad de los Andes, Colombia (Calorimetry and Experimental Thermodynamics, Kinetics, Material Science)
Cheila Goncalves Mothé, Federal University of Rio de Janeiro, Brazil (Polymer, Organics, Kinetics)
Riko Ozao, Department of Business and Informatics, Japan (Material Science)
Barbara Pacewska, Institute of Chemistry, Faculty of Civil Engineering, Mechanics and Petrochemistry, Warsaw University of Technology, Poland (Material Science, Inorganics)
Martin Palou, Slovak University of Technology in Bratislava, Slovakia (Calorimetry and Experimental Thermodynamics, Inorganics and Geoscience)
Yoncho Pelovsky, University of Chemical Technology and Metallurgy/ (UCTM), Bulgaria
(Calorimetry and Experimental Thermodynamics, Kinetics, Material Science, Inorganics and Geoscience, Theory and Instrumentation)
Luis A. Pérez Maqueda, Instituto de Ciencia de Materiales de Sevilla (Consejo Superior de Investigaciones Científicas – Universidad de Sevilla), Spain (Kinetics, Material Science)
György Pokol, Department of Inorganic and Analytical Chemistry, Budapest University of Technology and Economics, Hungary (Pharmaceuticals, Kinetics, Material Science)
Mohammad Mehdi Rashidi, University of Birmingham, United Kingdom (Calorimetry and Experimental Thermodynamics)
Saman Rashidi, Department of Energy, Faculty of New Science and Technologies, Semnan University, Semnan, Iran (Calorimetry and experimental thermodynamics, Nanofluids and thermal analysis, Entropy generation analysis for different thermal systems, Heat transfer enhancement of different thermal systems)
Géza Regdon Jr., Department of Pharmaceutical Technology, Hungary (Bio- and Lifescience, Pharmaceutical)
José A. Rodríguez Añón, Physics Department at the University of the Santiago de Compostela, Spain (Bio- and Lifescience, Calorimetry and Experimental Thermodynamics)
Andrei Rotaru, University of Craiova, Romania & Senior Researcher II at INFLPR-National Institute for Laser, Plasma & Radiation Physics, Romania (Kinetics, Material Science, Inorganics and Geoscience)
Mohammad Reza Safaei, Department of Civil and Environmental Engineering, Florida International University (FIU), USA (Nanofluid, Energy, Heat)
Kazuya Saito, Faculty of Pure and Applied Sciences at University of Tsukuba, Japan (Calorimetry and Experimental Thermodynamics, Materials Science, Theory and Instrumentation)
Saeed Shabestari, School of Metallurgy and Materials Engineering, Iran University of Science and Technology (IUST), Iran (Metallic Materials, Intermetallics, Material Science, Metals Solidification Processes, Phase Reactions during Solidification of Metals)
Egon Schnitzler, State University of Ponta Grossa-PR, Brazil (Bio- and Lifescience, Pharmaceutical)
Chi-Min Shu, Process Safety and Disaster Prevention Laboratory, Department of Safety, Health, and Environmental Engineering, National Yunlin University of Science and Technology (YunTech), Taiwan
(Kinetics, Material Science)
Peter Šimon, Slovak University of Technology, Faculty of Chemical and Food Technology, Slovakia
(Kinetics, Material Science)
S. M. Sohel Murshed, University of Lisbon, Portugal (Calorimetry and Experimental Thermodynamics, Material Science)
Petra Šulcová, University of Pardubice, Faculty of Chemical Technology, Head of Department of Inorganic Technology, Czech Republic (Material Science)
Fengrui Sun, Petroleum, Natural Gas and Geothermal Energy Engineering, Three Fields Energy Research Institute, Beijing, China (Calorimetry; Thermodynamics; Geoscience; Polymers; Instrumentation; Experiments; Theory)
Li-Xian Sun, School of Material Science and Engineering, Guangxi Key Laboratory of Information materials, Guilin University of Electronic Technology, China (Material Science)
Joan Josep Suñol, University of Girona, Spain (Kinetics, Material Science)
Stefano Vecchio Ciprioti, Department of Basic and Applied Science for Engineering (S.B.A.I.) (Chemical section “Paolo Silvestroni”) of the Faculty of Civil and Industrial Engineering - Sapienza University of Rome, Italy (Pharmaceutical, Kinetics, Material Science)
Sergey Verevkin, University of Rostock, Germany (Calorimetry and Experimental Thermodynamics)
Ranjit K. Verma, Inorganic and Analytical Chemistry in the University Department of Chemistry of Magadh University India (Kinetics)
Shuang Wang, School of Energy and Power Engineering, Jiangsu University, China (Calorimetry and Experimental Thermodynamics, Bio- and Lifesciences)
Qingsheng (Sam) Wang, Department of Chemical Engineering at Texas A&M University, USA (Calorimetry and Experimental Thermodynamics)
De-Yi Wang, IMDEA Materiales, Spain (Organics, Polymer)
Somchai Wongwises, Department of Mechanical Engineering, Faculty of Engineering, King Mongkut’s University of Technology Thonburi, Thailand (Thermodynamics)
Qiyuan XIE, State Key Lab. of Fire Science, University of Science & Technology of China, Huangshan Road 443, Hefei, Anhui, China, 230027 (kinetics, material science)
Qiang Xu, Nanjing University of Science and Technology, China (Calorimetry and Experimental Thermodynamics, Kinetics, Material Science)
Xiao-Jun Yang, China University of Mining and Technology, China (Nanofluid, Energy, Heat)
Yanping Yuan, Southwest Jiaotong University and Deputy Dean of School of Mechanical Engineering, China (Calorimetry and Experimental Thermodynamics, Organics, Polymer)
Irina Zvereva, Saint-Petersburg State University, Russian Federation (Materials Science, Calorimetry and Experimental Thermodynamics, Kinetics, Theory and Instrumentation, Inorganics)

Lorenzo Abate, Retired from the University of Catania, Italy (Inorganics, Complexes, Polymers)
Gisueppe Arena, Department of Chemical Sciences, University of Catania, Italy (Bio- and Lifescience, Inorganic)
David Bessières, University of Pau and Pays de l’Adour, France (Calorimetry and Experimental Thermodynamics, Theory and Instrumentation)
José Manuel Criado, Institute of Material Sciences of Sevilla, C.S.I.C.- University of Sevilla, Spain (Material Science, Polymers)
Jo Dweck, School of Chemistry, Rio de Janeiro Federal University, Brazil (Materials Science, Polymers, Bio- and Life Science)
Valter José Fernandes Jr., Analytical Chemistry, UFRN-Federal University of Rio Grande do Norte, Institute of Chemistry, Brazil (Materials Science, Bio- and Life Science)
Tatsuko Hatakeyama, Lignocel Research, Japan (Polymer)
Takayoshi Kimura, Retired from Research Institute of Science and Technology, Kindai University, Japan (Calorimetry and Experimental Thermodynamics)
Nobuyoshi Koga, Chemistry Laboratory, Department of Science Education, Graduate School of Education, Hiroshima University, Japan (Kinetics)
Mohamed Fathy Kotkata, Faculty of Science, Ain Shams University, Egypt (Materials Science)
Vladimir A. Logvinenko, Nikolaev Institute of Inorganic Chemistry, Siberian Branch of Russian Academy of Sciences, Novosibirsk State University, Russian Federation (Kinetics, Material Science, Inorganic)
Jiří Malek, Department of Physical Chemistry, University of Pardubice, Czech Republic
(Kinetics, Material Science, Inorganics)
Bruno Marongiu, Physical Chemistry at Sciences Faculty of University of Cagliari, Italy
(Calorimetry and Experimental Thermodynamics)
Perla Relkin, Retired from AgroParisTech-Centre de Massy, France (Bio- and Life Science)
Jean Rouquerol, Aix Marseille University, MADIREL Laboratory, France (Thermal Analysis, Calorimetry)
Alberto Schiraldi, Dept of Food Environmental Nutrition Sciences, University of Milan, Italy
(Thermodynamics, Thermal Analysis)
Jaroslav Šesták, Institute of Physics, Academy of Sciences, Czech Republic (Kinetics, Thermodynamics)
Piotr Staszczuk, The John Paul II Catholic University of Lublin, Institute of Biotechnology, Department of Bionanomaterials, Poland (Materials Science, Thermodynamics)
Vicenç Torra, Retired from Polytechnic University of Catalonia, Spain (Calorimetry and Experimental Thermodynamics, Theory and Instrumentation)
Paul J. van Ekeren, Independent researcher and lecturer in the field of Thermal Analysis, Calorimetry and Applied Thermodynamics, The Netherlands (Thermodynamics, Theory, Instrumental)



Working on a manuscript?

Avoid the most common mistakes and prepare your manuscript for journal editors.

Learn more