Skip to main content
Log in
Environmental Economics and Policy Studies

The Official Journal of the Society for Environmental Economics and Policy Studies / The Official Journal of the Asian Association of Environmental and Resource Economics

Publishing model:

Submission guidelines

Contents

Instructions for Authors

General

Submission of a manuscript will be considered to imply that it contains original unpublished work and is not being submitted for publication elsewhere.

Manuscripts should be submitted through the online submission system on the Springer EEPS site.

Initial submissions should be prepared following the below guidelines. Accepted manuscripts should follow the Instruction for Accepted Manuscripts far below.

Authors transfer the copyright of their articles to the Society for Environmental Economics and Policy Studies and Springer Japan effective if and when the articles are accepted for publication. The copyright covers the exclusive and unlimited rights to reproduce and distribute an article in any form of reproduction (printing, electronic media, or any other form); it also covers translation rights for all languages and countries. For U.S. authors the copyright is transferred to the extent transferable.

Text

Text Formatting

Manuscripts should be submitted in Word.

  • Use a normal, plain font (e.g., 10-point Times Roman) for text.
  • Use italics for emphasis.
  • Use the automatic page numbering function to number the pages.
  • Do not use field functions.
  • Use tab stops or other commands for indents, not the space bar.
  • Use the table function, not spreadsheets, to make tables.
  • Use the equation editor or MathType for equations.
  • Save your file in docx format (Word 2007 or higher) or doc format (older Word versions).

Manuscripts with mathematical content can also be submitted in LaTeX. We recommend using Springer Nature’s LaTeX template.

Headings

Please use the decimal system of headings with no more than three levels.

Abbreviations

Abbreviations should be defined at first mention and used consistently thereafter.

Footnotes

Footnotes can be used to give additional information, which may include the citation of a reference included in the reference list. They should not consist solely of a reference citation, and they should never include the bibliographic details of a reference. They should also not contain any figures or tables.

Footnotes to the text are numbered consecutively; those to tables should be indicated by superscript lower-case letters (or asterisks for significance values and other statistical data). Footnotes to the title or the authors of the article are not given reference symbols.

Always use footnotes instead of endnotes.

Acknowledgments

Acknowledgments of people, grants, funds, etc. should be placed in a separate section on the title page. The names of funding organizations should be written in full.

Abstracts, keywords and JEL code

Each submission must include an abstract of no more than 200 words. A list of up to 5 keywords that will be useful for indexing or searching should be included. In addition, Journal of Economic Literature classification numbers that identify the subject area of the article should be listed.

Abbreviations

All but the most common abbreviations should be spelled out the first time they are used in a manuscript.

Tables

  • All tables are to be numbered using Arabic numerals.
  • Tables should always be cited in text in consecutive numerical order.
  • For each table, please supply a table caption (title) explaining the components of the table.
  • Identify any previously published material by giving the original source in the form of a reference at the end of the table caption.
  • Footnotes to tables should be indicated by superscript lower-case letters (or asterisks for significance values and other statistical data) and included beneath the table body.

Artwork and Illustrations Guidelines

Electronic Figure Submission

  • Supply all figures electronically.
  • Indicate what graphics program was used to create the artwork.
  • For vector graphics, the preferred format is EPS; for halftones, please use TIFF format. MSOffice files are also acceptable.
  • Vector graphics containing fonts must have the fonts embedded in the files.
  • Name your figure files with "Fig" and the figure number, e.g., Fig1.eps.

Line Art

  • Definition: Black and white graphic with no shading.
  • Do not use faint lines and/or lettering and check that all lines and lettering within the figures are legible at final size.
  • All lines should be at least 0.1 mm (0.3 pt) wide.
  • Scanned line drawings and line drawings in bitmap format should have a minimum resolution of 1200 dpi.
  • Vector graphics containing fonts must have the fonts embedded in the files.

Halftone Art

  • Definition: Photographs, drawings, or paintings with fine shading, etc.
  • If any magnification is used in the photographs, indicate this by using scale bars within the figures themselves.
  • Halftones should have a minimum resolution of 300 dpi.

Combination Art

  • Definition: a combination of halftone and line art, e.g., halftones containing line drawing, extensive lettering, color diagrams, etc.
  • Combination artwork should have a minimum resolution of 600 dpi.

Color Art

  • Color art is free of charge for online publication.
  • If black and white will be shown in the print version, make sure that the main information will still be visible. Many colors are not distinguishable from one another when converted to black and white. A simple way to check this is to make a xerographic copy to see if the necessary distinctions between the different colors are still apparent.
  • If the figures will be printed in black and white, do not refer to color in the captions.
  • Color illustrations should be submitted as RGB (8 bits per channel).

Figure Lettering

  • To add lettering, it is best to use Helvetica or Arial (sans serif fonts).
  • Keep lettering consistently sized throughout your final-sized artwork, usually about 2–3 mm (8–12 pt).
  • Variance of type size within an illustration should be minimal, e.g., do not use 8-pt type on an axis and 20-pt type for the axis label.
  • Avoid effects such as shading, outline letters, etc.
  • Do not include titles or captions within your illustrations.

Figure Numbering

  • All figures are to be numbered using Arabic numerals.
  • Figures should always be cited in text in consecutive numerical order.
  • Figure parts should be denoted by lowercase letters (a, b, c, etc.).
  • If an appendix appears in your article and it contains one or more figures, continue the consecutive numbering of the main text. Do not number the appendix figures,"A1, A2, A3, etc." Figures in online appendices [Supplementary Information (SI)] should, however, be numbered separately.

Figure Captions

  • Each figure should have a concise caption describing accurately what the figure depicts. Include the captions in the text file of the manuscript, not in the figure file.
  • Figure captions begin with the term Fig. in bold type, followed by the figure number, also in bold type.
  • No punctuation is to be included after the number, nor is any punctuation to be placed at the end of the caption.
  • Identify all elements found in the figure in the figure caption; and use boxes, circles, etc., as coordinate points in graphs.
  • Identify previously published material by giving the original source in the form of a reference citation at the end of the figure caption.

Figure Placement and Size

  • Figures should be submitted within the body of the text. Only if the file size of the manuscript causes problems in uploading it, the large figures should be submitted separately from the text.
  • When preparing your figures, size figures to fit in the column width.
  • For large-sized journals the figures should be 84 mm (for double-column text areas), or 174 mm (for single-column text areas) wide and not higher than 234 mm.
  • For small-sized journals, the figures should be 119 mm wide and not higher than 195 mm.

Permissions

If you include figures that have already been published elsewhere, you must obtain permission from the copyright owner(s) for both the print and online format. Please be aware that some publishers do not grant electronic rights for free and that Springer will not be able to refund any costs that may have occurred to receive these permissions. In such cases, material from other sources should be used.

Accessibility

In order to give people of all abilities and disabilities access to the content of your figures, please make sure that

  • All figures have descriptive captions (blind users could then use a text-to-speech software or a text-to-Braille hardware)
  • Patterns are used instead of or in addition to colors for conveying information (colorblind users would then be able to distinguish the visual elements)
  • Any figure lettering has a contrast ratio of at least 4.5:1

Generative AI Images

Please check Springer’s policy on generative AI images and make sure your work adheres to the principles described therein.

Footnotes

Footnotes should be numbered consecutively.

References

Citations in the text or footnotes should give only the name(s) of the author(s) and year of publication. At the end of the manuscript there should be a list of references.

Instruction for Accepted Paper

Please prepare the final version of your accepted paper following this instruction:

The Instruction for Accepted Manuscripts (Download docx, 31 kB)

Ethical Responsibilities of Authors

This journal is committed to upholding the integrity of the scientific record. As a member of the Committee on Publication Ethics (COPE) the journal will follow the COPE guidelines on how to deal with potential acts of misconduct.

Authors should refrain from misrepresenting research results which could damage the trust in the journal, the professionalism of scientific authorship, and ultimately the entire scientific endeavour. Maintaining integrity of the research and its presentation is helped by following the rules of good scientific practice, which include*:

  • The manuscript should not be submitted to more than one journal for simultaneous consideration.
  • The submitted work should be original and should not have been published elsewhere in any form or language (partially or in full), unless the new work concerns an expansion of previous work. (Please provide transparency on the re-use of material to avoid the concerns about text-recycling (‘self-plagiarism’).
  • A single study should not be split up into several parts to increase the quantity of submissions and submitted to various journals or to one journal over time (i.e. ‘salami-slicing/publishing’).
  • Concurrent or secondary publication is sometimes justifiable, provided certain conditions are met. Examples include: translations or a manuscript that is intended for a different group of readers.
  • Results should be presented clearly, honestly, and without fabrication, falsification or inappropriate data manipulation (including image based manipulation). Authors should adhere to discipline-specific rules for acquiring, selecting and processing data.
  • No data, text, or theories by others are presented as if they were the author’s own (‘plagiarism’). Proper acknowledgements to other works must be given (this includes material that is closely copied (near verbatim), summarized and/or paraphrased), quotation marks (to indicate words taken from another source) are used for verbatim copying of material, and permissions secured for material that is copyrighted.

Important note: the journal may use software to screen for plagiarism.

  • Authors should make sure they have permissions for the use of software, questionnaires/(web) surveys and scales in their studies (if appropriate).
  • Research articles and non-research articles (e.g. Opinion, Review, and Commentary articles) must cite appropriate and relevant literature in support of the claims made. Excessive and inappropriate self-citation or coordinated efforts among several authors to collectively self-cite is strongly discouraged.
  • Authors should avoid untrue statements about an entity (who can be an individual person or a company) or descriptions of their behavior or actions that could potentially be seen as personal attacks or allegations about that person.
  • Research that may be misapplied to pose a threat to public health or national security should be clearly identified in the manuscript (e.g. dual use of research). Examples include creation of harmful consequences of biological agents or toxins, disruption of immunity of vaccines, unusual hazards in the use of chemicals, weaponization of research/technology (amongst others).
  • Authors are strongly advised to ensure the author group, the Corresponding Author, and the order of authors are all correct at submission. Adding and/or deleting authors during the revision stages is generally not permitted, but in some cases may be warranted. Reasons for changes in authorship should be explained in detail. Please note that changes to authorship cannot be made after acceptance of a manuscript.

*All of the above are guidelines and authors need to make sure to respect third parties rights such as copyright and/or moral rights.

Upon request authors should be prepared to send relevant documentation or data in order to verify the validity of the results presented. This could be in the form of raw data, samples, records, etc. Sensitive information in the form of confidential or proprietary data is excluded.

If there is suspicion of misbehavior or alleged fraud the Journal and/or Publisher will carry out an investigation following COPE guidelines. If, after investigation, there are valid concerns, the author(s) concerned will be contacted under their given e-mail address and given an opportunity to address the issue. Depending on the situation, this may result in the Journal’s and/or Publisher’s implementation of the following measures, including, but not limited to:

  • If the manuscript is still under consideration, it may be rejected and returned to the author.
  • If the article has already been published online, depending on the nature and severity of the infraction:

    - an erratum/correction may be placed with the article

    - an expression of concern may be placed with the article

    - or in severe cases retraction of the article may occur.

The reason will be given in the published erratum/correction, expression of concern or retraction note. Please note that retraction means that the article is maintained on the platform, watermarked “retracted” and the explanation for the retraction is provided in a note linked to the watermarked article.

  • The author’s institution may be informed
  • A notice of suspected transgression of ethical standards in the peer review system may be included as part of the author’s and article’s bibliographic record.

Fundamental errors

Authors have an obligation to correct mistakes once they discover a significant error or inaccuracy in their published article. The author(s) is/are requested to contact the journal and explain in what sense the error is impacting the article. A decision on how to correct the literature will depend on the nature of the error. This may be a correction or retraction. The retraction note should provide transparency which parts of the article are impacted by the error.

Suggesting / excluding reviewers

Authors are welcome to suggest suitable reviewers and/or request the exclusion of certain individuals when they submit their manuscripts. When suggesting reviewers, authors should make sure they are totally independent and not connected to the work in any way. It is strongly recommended to suggest a mix of reviewers from different countries and different institutions. When suggesting reviewers, the Corresponding Author must provide an institutional email address for each suggested reviewer, or, if this is not possible to include other means of verifying the identity such as a link to a personal homepage, a link to the publication record or a researcher or author ID in the submission letter. Please note that the Journal may not use the suggestions, but suggestions are appreciated and may help facilitate the peer review process.

Authorship principles

These guidelines describe authorship principles and good authorship practices to which prospective authors should adhere to.

Authorship clarified

The Journal and Publisher assume all authors agreed with the content and that all gave explicit consent to submit and that they obtained consent from the responsible authorities at the institute/organization where the work has been carried out, before the work is submitted.

The Publisher does not prescribe the kinds of contributions that warrant authorship. It is recommended that authors adhere to the guidelines for authorship that are applicable in their specific research field. In absence of specific guidelines it is recommended to adhere to the following guidelines*:

All authors whose names appear on the submission

1) made substantial contributions to the conception or design of the work; or the acquisition, analysis, or interpretation of data; or the creation of new software used in the work;

2) drafted the work or revised it critically for important intellectual content;

3) approved the version to be published; and

4) agree to be accountable for all aspects of the work in ensuring that questions related to the accuracy or integrity of any part of the work are appropriately investigated and resolved.

* Based on/adapted from:

ICMJE, Defining the Role of Authors and Contributors,

Transparency in authors’ contributions and responsibilities to promote integrity in scientific publication, McNutt at all, PNAS February 27, 2018

Disclosures and declarations

All authors are requested to include information regarding sources of funding, financial or non-financial interests, study-specific approval by the appropriate ethics committee for research involving humans and/or animals, informed consent if the research involved human participants, and a statement on welfare of animals if the research involved animals (as appropriate).

The decision whether such information should be included is not only dependent on the scope of the journal, but also the scope of the article. Work submitted for publication may have implications for public health or general welfare and in those cases it is the responsibility of all authors to include the appropriate disclosures and declarations.

Data transparency

All authors are requested to make sure that all data and materials as well as software application or custom code support their published claims and comply with field standards. Please note that journals may have individual policies on (sharing) research data in concordance with disciplinary norms and expectations.

Role of the Corresponding Author

One author is assigned as Corresponding Author and acts on behalf of all co-authors and ensures that questions related to the accuracy or integrity of any part of the work are appropriately addressed.

The Corresponding Author is responsible for the following requirements:

  • ensuring that all listed authors have approved the manuscript before submission, including the names and order of authors;
  • managing all communication between the Journal and all co-authors, before and after publication;*
  • providing transparency on re-use of material and mention any unpublished material (for example manuscripts in press) included in the manuscript in a cover letter to the Editor;
  • making sure disclosures, declarations and transparency on data statements from all authors are included in the manuscript as appropriate (see above).

* The requirement of managing all communication between the journal and all co-authors during submission and proofing may be delegated to a Contact or Submitting Author. In this case please make sure the Corresponding Author is clearly indicated in the manuscript.

Author contributions

In absence of specific instructions and in research fields where it is possible to describe discrete efforts, the Publisher recommends authors to include contribution statements in the work that specifies the contribution of every author in order to promote transparency. These contributions should be listed at the separate title page.

Examples of such statement(s) are shown below:

• Free text:

All authors contributed to the study conception and design. Material preparation, data collection and analysis were performed by [full name], [full name] and [full name]. The first draft of the manuscript was written by [full name] and all authors commented on previous versions of the manuscript. All authors read and approved the final manuscript.

Example: CRediT taxonomy:

• Conceptualization: [full name], …; Methodology: [full name], …; Formal analysis and investigation: [full name], …; Writing - original draft preparation: [full name, …]; Writing - review and editing: [full name], …; Funding acquisition: [full name], …; Resources: [full name], …; Supervision: [full name],….

For review articles where discrete statements are less applicable a statement should be included who had the idea for the article, who performed the literature search and data analysis, and who drafted and/or critically revised the work.

For articles that are based primarily on the student’s dissertation or thesis, it is recommended that the student is usually listed as principal author:

A Graduate Student’s Guide to Determining Authorship Credit and Authorship Order, APA Science Student Council 2006

Affiliation

The primary affiliation for each author should be the institution where the majority of their work was done. If an author has subsequently moved, the current address may additionally be stated. Addresses will not be updated or changed after publication of the article.

Changes to authorship

Authors are strongly advised to ensure the correct author group, the Corresponding Author, and the order of authors at submission. Changes of authorship by adding or deleting authors, and/or changes in Corresponding Author, and/or changes in the sequence of authors are not accepted after acceptance of a manuscript.

  • Please note that author names will be published exactly as they appear on the accepted submission!

Please make sure that the names of all authors are present and correctly spelled, and that addresses and affiliations are current.

Adding and/or deleting authors at revision stage are generally not permitted, but in some cases it may be warranted. Reasons for these changes in authorship should be explained. Approval of the change during revision is at the discretion of the Editor-in-Chief. Please note that journals may have individual policies on adding and/or deleting authors during revision stage.

Author identification

Authors are recommended to use their ORCID ID when submitting an article for consideration or acquire an ORCID ID via the submission process.

Deceased or incapacitated authors

For cases in which a co-author dies or is incapacitated during the writing, submission, or peer-review process, and the co-authors feel it is appropriate to include the author, co-authors should obtain approval from a (legal) representative which could be a direct relative.

Authorship issues or disputes

In the case of an authorship dispute during peer review or after acceptance and publication, the Journal will not be in a position to investigate or adjudicate. Authors will be asked to resolve the dispute themselves. If they are unable the Journal reserves the right to withdraw a manuscript from the editorial process or in case of a published paper raise the issue with the authors’ institution(s) and abide by its guidelines.

Confidentiality

Authors should treat all communication with the Journal as confidential which includes correspondence with direct representatives from the Journal such as Editors-in-Chief and/or Handling Editors and reviewers’ reports unless explicit consent has been received to share information.

Compliance with Ethical Standards

To ensure objectivity and transparency in research and to ensure that accepted principles of ethical and professional conduct have been followed, authors should include information regarding sources of funding, potential conflicts of interest (financial or non-financial), informed consent if the research involved human participants, and a statement on welfare of animals if the research involved animals.

Authors should include the following statements (if applicable) in a separate section entitled “Compliance with Ethical Standards” when submitting a paper:

  • Disclosure of potential conflicts of interest
  • Research involving Human Participants and/or Animals
  • Informed consent

Please note that standards could vary slightly per journal dependent on their peer review policies (i.e. single or double blind peer review) as well as per journal subject discipline. Before submitting your article check the instructions following this section carefully.

The corresponding author should be prepared to collect documentation of compliance with ethical standards and send if requested during peer review or after publication.

The Editors reserve the right to reject manuscripts that do not comply with the above-mentioned guidelines. The author will be held responsible for false statements or failure to fulfill the above-mentioned guidelines.

Open access publishing

To find out more about publishing your work Open Access in Environmental Economics and Policy Studies, including information on fees, funding and licenses, visit our Open access publishing page.

Navigation