6th International Conference on Adhesive Bonding 2021

1. Front Matter

   Pages i-viii

   PDF

2. Open Assembly Time of Water-Borne Polyvinyl Acetate (PVAc) Wood Adhesives Affected by Various Factors

   • Peter Bliem, Hendrikus W. G. van Herwijnen, Robert Meissl, Walter Stadlbauer, Johannes Konnerth

   Pages 1-15

3. Engineering Technology and Preparation of Coating Systems Made with Epoxy Resin-Based Bonding Agents Modified with the Addition of Granite Powder Sourced from Quarry Wastes

   • Łukasz Kampa, Łukasz Sadowski

   Pages 17-31

4. Mechanical and Adhesive Properties of Cement-Lime Plasters Modified with Waste Granite Powder

   • Marlena Rudner, Adrian Chajec, Łukasz Sadowski

   Pages 33-51

5. Characterization of Fast Adhesive Curing Reactions—A Novel Experimental Setup

   • Sarah Glaser, Elisabeth Stammen, Klaus Dilger

   Pages 53-68

6. Material Extrusion on Enameled Steel Surfaces

   • H. Schneider, K. Dilger, S. Hartwig

   Pages 69-81

7. The Effect of the Viscosity and the Contact Angle on the Pull-Off Strength of Epoxy Resin Modified with Waste Granite Powders

   • Agnieszka Chowaniec

   Pages 83-102

8. Investigation of the Cleaning Effectiveness of Laser Radiation for Improved Adhesion on Glass Dust Contaminated Glass Fiber Reinforced Polyamide 6

   • C. J. A. Beier, R. Seewald, H. Dittmar, J. Weiland, A. Schiebahn, P. Jaeschke et al.

   Pages 103-113

9. Structural Bonding of Thin-Walled Magnesium Die Cast Components

   • C. Koch, H. Sharabi, M. Kahlmeyer, A. Fros, S. Boehm, M. Fehlbier

   Pages 115-126

10. The Behaviour of CFRP Adhesive Joints Under Different Loading Rates

    • Joana Filipa Dias Varajão, Ricardo João Camilo Carbas, Eduardo André Sousa Marques, Lucas Filipe Martins da Silva

    Pages 127-142

11. Long-Term Resistant Bonding Between Wood and Aluminium Alloy for Hybrid Lightweight Composites

    • M. Burnett, M. Kahlmeyer, N. Ratsch, S. Böhm

    Pages 143-151

12. Multiaxial Fatigue Life Assessment of Adhesive Joints Based on the Concepts of Critical Planes: Stress-Based Approaches

    • O. M. R. Beugre, A. Akhavan-Safar, L. F. M. da Silva

    Pages 153-169

This book focusses on structural bonding, including many facets, like fundamental aspects of adhesion, science and technology of surfaces, adhesive materials, mechanical properties of bonded joints, innovative designs and applications, testing and standardization, industrial aspects, quality procedures, environmental and ecological aspects. This first volume of the new series gathers selected contributions of the 6th international conference on structural adhesive bonding AB 2021, held in Porto, Portugal, 8-9 July 2021, represents the latest trends and serves as a reference volume for researchers and graduate students working in this field.

• Bonded joints
• Adhesive materials
• Conference Proceedings
• Structural bonding
• Science and technology of surfaces
• Stress-based multiaxial fatigue analysis
• Fatigue life estimation
• Granite powder
• Cements composites
• Surface cleaning
• Adhesive bonded hybrid wood-metal joints
• Thermoplastic polyurethane

• Department of Mechanical Engineering, Faculty of Engineering, University of Porto, Porto, Portugal

  Lucas F. M. da Silva

• Department of Mechanical Engineering, University of Bristol, Bristol, UK

  Robert D. Adams

Lucas FM da Silva is Full Professor at the Department of Mechanical Engineering at the Faculty of Engineering of the University of Porto (FEUP). He leads the Advanced Joining Processes Unit (AJPU) of the Institute of Science and Innovation in Mechanical Engineering and Industrial Engineering (INEGI). He is Editor-in-Chief of The Journal of Adhesion.

Robert D. Adams is Emeritus Professor of Applied Mechanics at the University of Bristol and Visiting Professor at the Universities of Oxford and Oxford Brookes. In 2011, he was awarded the R.L. Patrick Fellowship of the US Adhesion Society. He has been Joint Editor-in-Chief of the International Journal of Adhesion and Adhesives since 1999.

Policies and ethics