Recent Trends in Thermal Engineering

1. Front Matter

   Pages i-xiv

   PDF

2. Transport Phenomena in a PWR Subchannel Replete with Al2O3–TiO2/Water Hybrid Nanofluid: A CFD Approach

   • Md Yeashir Arafat, Shashwata Chakraborty, Debashis Datta

   Pages 1-13

3. Performance Analysis and Optimization of Ammonia-CO2 and Ammonia–Propylene Refrigerant Pairs for Cascade Refrigeration

   • Harvendra Singh, Kaushalendra Kumar Singh, Harshit Bahri

   Pages 15-25

4. A Comprehensive Review of Performance, Combustion, and Emission Characteristics of Biodiesel-Fueled Diesel Engines

   • Suraj Bhan, Raghvendra Gautam, Pusphendra Singh, Abhishek Sharma

   Pages 27-41

5. Analysis of Different Techniques of Superconductivity

   • Pooja Rani

   Pages 43-48

6. Prediction of the Dynamic Viscosity of MXene/palm Oil Nanofluid Using Support Vector Regression

   • Naman Parashar, Junaid Khan, Navid Aslfattahi, R. Saidur, Syed Mohd Yahya

   Pages 49-55

7. Experimental and Computational Investigation of Coefficient of Discharge of Venturimeter

   • Omprakash Yadav, Abhay Dahiya, Vinod Kumar Yadav, Rahul Sharma

   Pages 57-72

8. A Comprehensive Review of Performance, Combustion, and Emission Characteristics of Biodiesel Blend with Nanoparticles in Diesel Engines

   • Suraj Bhan, Raghvendra Gautam, Pusphendra Singh, Abhishek Sharma

   Pages 73-88

9. Experimental and Computational Analysis of Household Cook Stoves: A Review

   • Anoop Singh, Vinod Kumar Yadav, Amardeep, Mahesh Kumar Maddheshiya, Sagar Sharma, Manav Jha et al.

   Pages 89-101

10. Development of Heat Storage Device Assisted with Heat Pipe

    • Virendra Kumar Yadav, Ambuj Kumar, Ritesh Jaiswal

    Pages 103-112

11. Free Convective Heat Transfer with Boundary Slip Flow in a Nanofluid Along a Stretching Cylinder

    • Padam Singh, Vineet Kumar Sharma, Manoj Kumar

    Pages 113-123

12. Cooling Methods for Solar Photovoltaic Modules Using Phase Change Materials: A Review

    • Amit Kumar, Lalta Prasad

    Pages 125-142

13. Thermal Comfort and Energy Efficient Design of a Central Air Conditioning System of an Educational Institute

    • Rahul Sharma, Roshan Raman, Omprakash Yadav, Mohammad Shahbaz Khan, Vinod Kumar Yadav

    Pages 143-159

14. Competency of Alcoholic Fuels as Diesel Blends

    • Payal Sharma, Nathi Ram Chauhan, Manish Saraswat

    Pages 161-168

15. Experimental Study of Performance and Emission Characteristics Using Biodiesel Blends in a Diesel Engine: A Review

    • Rahul Sharma, Roshan Raman, Omprakash Yadav, Vimal Pratap Singh, Himanshu Tanwar, Uday Kumar et al.

    Pages 169-187

16. Comparative Assessment of the Combustion Property of a Cavity-Based Scramjet Combustor with Strut and Wall Injection Technique

    • Ravi Kumar Samadhiya, Devendra Singh

    Pages 189-200

17. Study of Eco-friendly Combined System for Refrigeration and Power Generation

    • Ranjeet Kumar Singh, Tarun Kumar Gupta, Vinod Kumar Yadav, Prabhat Ranjan, Pankaj Kumar Chauhan, Akash Deep

    Pages 201-207

18. Thermodynamic Investigation of Effect of Variation in Thermo-Physical Properties of Gas Turbine Working Fluid on Cycle Performance

    • Wasim Akram, Sanjay Sanjay, M. A. Hassan, Souvik Singh Rathore

    Pages 209-228

19. NOx Elimination Laboratory Experiments for Biodiesel-Fueled C.I. Engine in Cooler Gas Flow Engine

    • Ravi Kumar Samadhiya, Devendra Kumar

    Pages 229-238

This book presents select proceedings of the 3rd International Conference on Computational and Experimental Methods in Mechanical Engineering (ICCEMME 2021). It gives an overview of recent developments in the field of fluid dynamics and thermal engineering. Topics covered include case studies in thermal engineering, combustion engines, computational fluid dynamics (cfd), cooling systems, energy conservation, energy conversion, renewable energy, bio fuels, gas turbines, heat exchangers and heat transfer systems, heat pipes and pumps, heat transfer augmentation, refrigeration and HVAC systems, fluids engineering, energy and process, and thermal power plants. The book will be useful for researchers and professionals working in the area of thermal engineering and allied fields.

• Combustion Engines
• Thermal Engineering
• Refrigeration
• Computational Fluid Dynamics
• Heat Exchangers and Heat Transfer Systems
• ICCCMME 2021

• Department of Mechanical Engineering, Centre for Energy Studies, IIT Delhi, New Delhi, India

  L. M. Das

• Department of Mechanical Engineering, G. L. Bajaj Institute of Technology and Management, Greater Noida, India

  Abhishek Sharma

• Department of Mechanical and Industrial Engineering, Sultan Qaboos University, Muscat, Oman

  Fitwi Yohaness Hagos

• Department of Mechanical Engineering, School of Engineering, Shivnadar University, Greater Noida, India

  Sumit Tiwari

Dr. L. M. Das is a retired Professor from IIT Delhi. He holds a PhD degree in Mechanical Engineering from IIT, Delhi. Dr Das has got a teaching/research experience of more than forty four years to his credit. His areas of research interest centres around development of alternative-fuelled low emission engines/vehicles. He has supervised 34 PhD theses and seventy-seven MTech Projects. He has published more than 80 research papers in various international/national journals. He had several international research assignments. He was a Visiting Professor in University of California, Riverside (Centre for Environment Research and Technology) in USA; researcher in INRETS, France; Consultant to Shell (Thornton Research Centre, Chester, England); and researcher in Lisbon Technical University (Portugal.) He had delivered invited lectures in India as well as in USA, Canada, England, France, Germany, Japan, Switzerland, Australia, Belgium Netherlands, Thailand, Moscow, Turkey, Philippines, Nepal and Sri Lanka. He has been a member of several research/technical and scientific advisory committees of Department of Science and Technology, Ministry of New and Renewable Energy, Indian Institute of Petroleum, Indian Council of Agricultural Research, Departmnet of Biotechnology, Indian Oil Research Lab, etc. He was a Member of Core group of Automotive Research, (CAR) and a member of the Expert Committee for Auto-Fuel Vision and Policy 2025. He was the Convener of Technical Committee of World Hydrogen Technology Convention held in August 2009 at New Delhi. Presently he is also the Chairman of Sectional Committee of PCD 3 of Bureau of Indian Standards. Professor  Das had been the principal investigator of several sponsored projects funded by MNRE, DST, General Motors (USA), European Union, UNIDO, Shell (England). He has been awarded “Rajiv Gandhi Samman” by the Department of Science and Technology, Government of Orissa (2005). In 2012, he has been awarded Lockheed Martin award for his R&D achievements. International Association of Hydrogen Energy has given him the ‘Outstanding Service Award” for his “Altruistic Contribution” to the “cause of Hydrogen Economy”. He has also been awarded T.N. Veziroglu award by Hydrogen Association of India (2013) and Biju Patnaik award by Odisha Science Academy for scientific excellence “in recognition of his original and creative contribution” (2014). 


 


Dr. Abhishek Sharma working as a Professor in Department of Mechanical Engineering, G.L. Bajaj Institute of Technology and Management, G. Noida, INDIA. He has more than 17 years of international involvement in academic teaching & research across recognized Indian and African universities. He has published over fifty research articles in SCI/SCIE & SCOPUS indexed journals; other peer-reviewed journals; books; IEEE conference proceedings. He serves as the reviewer and editorial member in many peer-reviewed journals and conferences. He received his bachelor degree in Mechanical Engineering from HBTI Kanpur, India, in 2003; Master of Technology (M. Tech) in Thermal Engineering from UP Technical University, Uttar Pradesh, India, in 2011; Doctor of Philosophy (PhD) in Mechanical Engineering from UPES Dehradun, India, in June 2016. He is associated with academic teaching & research by functioning as a research committee member; master thesis examiner; university curriculum revision committee member; course instructor; university question setter; master program evaluator; journal editor; SCIE & Scopus-indexed journals referee; book author; and IEEE conference referee. His primary areas of research interest include the development of alternative-fueled low emission engine/vehicles, alternative fuels such as CNG, biodiesel and their blends and environmental conscious engine modeling. 


 


Dr. Ftwi Yohaness Hagos  is currently working as a senior lecturer in the Department of Mechanical and Industrial Engineering, college of Engineering, Sultan Qaboos University, Al Khould, Muscat, Oman. he also worked as a senior lecturer in the Universiti Malaysia Pahang, Malaysia, since February 2014 to November 2020. He received his PhD degree in Mechanical Engineering, Universiti Teknologi PETRONAS, and Malaysia in 2014. He received his Master of Engineering from Delhi College of Engineering, Delhi University, India in 2005. He received his B. Sc. Degree in Mechanical Engineering from Addis Ababa University, Ethiopia in 2001. He has served from graduate assistant until the rank of Assistant Professor from 2002 to 2010 in the Mechanical Engineering Department, Mekelle University. During his service in Mekelle University, he has assumed different academic and administrative posts. He has published more than 60 articles in international scholarly journals and conferences. He has also supervised 1 PhD and 1 Masters by research thesis, 7 Master thesis (mixed mode), 1 Masters by coursework dissertation and more than 40 undergraduate final year projects. Currently he has 1 PhD and 3 Masters Students under his supervision. His area of specialization is IC engines, thermo-fluids and energy and his research interests are in IC engines, combustion, modelling and simulation, optical diagnostics applied to combustion and flow, thermo-fluids, energy storage, renewable energy, energy resource assessment and automotive engineering. He is certified chartered Engineeer by the Engineering council, UK, and Member of Institute of Mechanical Engineers (IMechE), UK. Besides, He is also an editorial board member for Biofuels Journal and Brana Journal of Engineering. Since January 2015, he is associate editor-in-chief for the Journal of Mechanical Engineering and Science (JMES). 




Dr. Sumit Tiwari is working with Shiv Nadar University, Dadri, Uttar Pradesh. He received the B.Tech degree in mechanical engineering from the Uttar Pradesh Technical University, Lucknow (now AKTU). Further, he got M.Tech and Ph.D. degree from the Indian Institute of Technology (IIT) Delhi. He got assistantship for his Ph.D. from “Ministry of New and Renewable Energy (MNRE)” assistantship. He worked with Professor Patrick Phelan’s Group, USA, as a research intern for 06 month under the fellowship named “Building Energy Efficiency Higher & Advanced Network (BHAVAN) Fellowship Program” which is a program executed by Indo-U.S. Science and Technology Forum (IUSSTF) and department of science and technology (DST). He got Shrimati Vijay-Usha Sodha Research Award for the session 2018-19 given by Center for Energy Studies, IIT Delhi. He also got second prize under "Best thesis award" in Ph.D. symposium organised by "Madan Mohan Malaviya University of Technology, Gorakhpur (U.P) INDIA & University of the Ryukyus, Okinawa, Japan". He is working on different solar thermal technologies namely, photovoltaic thermal (PVT) greenhouse drying system, PVT greenhouse heating system, PVT greenhouse biogas heating system, solar still, PVT air collector, PVT air collector integrated drying system, passive cooling of building, and solar adsorption cooling system etc. He has published several SCI journal papers with high impact factor and international conference papers in his field. He has more than 12 years’ experience of teaching and research. He has also got several recognitions during his study as well as in teaching. He is working as a reviewer in more than 17 International SCI Journals. 

Policies and ethics