Proceedings of ICDMC 2019

1. Front Matter

   Pages i-xv

   PDF

2. Numerical Investigation on Amphibious UAV Using Turbulent Models for Drag Reduction

   • P. Gokul Raj, Balasubramanian Esakki, P. Vikram, Lung-Jieh Yang

   Pages 1-8

3. Design and Simulation of Self-balancing Robot Using Reaction Sphere

   • M. Vignesh, A. S. Praveen

   Pages 9-16

4. Topology Optimization and Modal Analysis of Nanosatellite Structure

   • K. J. Vinay Kumar, K. Sesha Sai CharanTej, Nabin Kumar Jana, Diva Sharma, Balasubramanian Esakki

   Pages 17-29

5. Experimental Investigation of Twin Elliptic Orifice Using High Speed Jet Facility

   • S. Parameshwari, Pradeep Kumar, S. Thanigaiarasu, E. Rathakrishnan

   Pages 31-39

6. Study of No_x Treatment with Selective Catalytic Reduction and Diesel Exhaust Fluid with Emphasis on Importance of Mixer in Flow

   • Ibraheem Raza Khan, Y. Lethwala, Aayush Chawla, S. Jaichandar

   Pages 41-49

7. Advancements in Automotive Applications of Fuel Cells—A Comprehensive Review

   • Newel Francis Thomas, Rishabh Jain, Nishanth Sharma, S. Jaichandar

   Pages 51-64

8. Energy Generation from Piezoelectric Material in Automobile

   • Aman Akotkar, Anand Kumar Sinsh, S. Jaichandar

   Pages 65-70

9. Evaluation of Microalgae Biodiesel Blend Along with DTBP as an Ignition Enhancer on Diesel Engine Attributes

   • A. Gurusamy, V. Gnanamoorthi, P. Purushothaman, P. Mebin Samuel, A. A. Muhammad Irfan

   Pages 71-82

10. Experimental Investigation on the Emission Level of a Single Cylinder Petrol Engine with Manifolds of Different Geometry

    • K. Raja, Amala Justus Selvam, P. L. Rupesh

    Pages 83-89

11. Experimental Analysis of Hevea Brasiliensis Methyl Ester Diesel Blend with Antioxidant Additive in a Di-diesel Engine

    • A. A. Muhammad Irfan, Sivanandi Periyasamy, A. Gurusamy

    Pages 91-100

12. Recent Application and Preservation of Bamboo as Sustainable Material

    • Amol Ashok Kamble, Suppiah Subramaniam

    Pages 101-111

13. Development of Eco-friendly Alkaline Activated Concrete

    • Dhavamani Doss Sakthidoss, Thirugnanasambandam Senniappan

    Pages 113-127

14. Design Optimization of Suspension and Steering Systems for Commercial Vehicles

    • V. Vijaykumar, P. Anand

    Pages 129-142

15. Experimental Study on Vibration Control of Transportation Trailers Used for Spacecraft

    • Nandikolla Diwakar, S. Balaguru

    Pages 143-151

16. Thermo Mechanical Analysis of Multipass Butt-Welded Joints by Finite Element Method

    • T. Raja, P. Anand, M. Sundarraj, M. Karthick, A. Kannappan

    Pages 153-164

17. Effect of Aspect Ratio on the Buckling Load of Stiffened Circular Plates

    • V. Lakshmi Shireen Banu, Veeredhi Vasudeva Rao

    Pages 165-177

18. Experimental Study on Tyre Dynamics and Properties of Heavy Load Transporting Vehicle

    • S. Balaguru, J. Venkataramana

    Pages 179-190

19. Analytical Modeling and FEM Simulation of the Collapse Voltage of an Angular Ring Metallization-Based MEMS Ultrasonic Transducer

    • Reshmi Maity, N. P. Maity, Shonkho Suvro, K. Guha, K. Srinivasa Rao, K. Girija Sravani et al.

    Pages 191-198

20. Study of 3D Hexagonal Membrane Structure for MEMS-Based Ultrasonic Transducer Using Finite Element Method

    • Reshmi Maity, N. P. Maity, K. Guha, K. Srinivasa Rao, K. Girija Sravani, S. Baishya

    Pages 199-209

This book comprises select proceedings of the International Conference on Design, Materials, Cryogenics and Constructions (ICDMC 2019). The chapters cover latest research in different areas of mechanical engineering such as additive manufacturing, automation in industry and agriculture, combustion and emission control, CFD, finite element analysis, and engineering design. The book also focuses on cryogenic systems and low-temperature materials for cost-effective and energy-efficient solutions to current challenges in the manufacturing sector. Given its contents, the book can be useful for students, academics, and practitioners. 

• Additive manufacturing
• Combustion and emission control
• Cryogenic systems
• Alternate fuels
• Industrial robotics and automation
• Low-temperature materials
• Design and optimization
• ICDMC 2019

• Tamkang University, New Taipei City, Taiwan

  Lung-Jieh Yang

• National Institute of Technology Tiruchirappalli, Tiruchirappalli, India

  A. Noorul Haq

• Vel Tech Rangarajan Dr. Sagunthala R&D Institute of Science and Technology, Chennai, India

  Lenin Nagarajan

Dr. Lung-Jieh Yang is presently working as Professor in the Department of Mechanical and Electro-Mechanical Engineering, Tamkang University, Taiwan. He obtained his B.S. (Aerospace Engineering) from National Cheng-Kung University, Taiwan, M.S. (Mechanical Engineering) from Tamkang University, Taiwan and Ph.D. (Applied Mechanics) from National Taiwan University, Taiwan. His total teaching and research experience is 21 years. His fields of speciality are Micro Aerial Vehicles & Aerospace Engineering and Polymer MEMS. He has published 60 papers in International Journals and 93 papers in International Conferences. He received 09 patents from US and Taiwan Patent Offices.

Dr. A. Noorul Haq is working as Professor (Higher Administrative Grade) in the Department of Production Engineering, National Institute of Technology, Tiruchirappalli, Tamilnadu, India. He completed his B.E. (Mechanical Engineering) at Annamalai University, M.E. (Mechanical Engineering) at University of Madras, Tamil Nadu, and Ph.D. (Mechanical Engineering) at Indian Institute of Technology, Delhi.  His total teaching and research experience is 42 years. His major areas of research interests include Operations Management, Industrial Engineering, Optimization Techniques and Supply Chain Management. He has published 141 research articles out of which 96 are in internationally reputed journals.

Dr. N. Lenin is currently working as Professor in the Department of Mechanical Engineering, Vel Tech Rangarajan Dr. Sagunthala R&D Institute of Science and Technology, Chennai, India. He obtained his B.E. (Mechanical Engineering) from Madurai Kamaraj University, Tamil Nadu, M.E. (Production Engineering) and Ph.D. (Mechanical Engineering) from Anna University, Tamil Nadu. He is having 13 years of experience in Teaching and Research. His major areas of research interests include Facility Layout Design, Manufacturing Optimization and Composite Materials. He has published 25 papers inrespected international journals.

Policies and ethics