Bioceramics and the Human Body

Hand MP Joint Implant Arthroplasty: The State of the Art. Vantages and Disadvantages of the Most Common Implant Arthroplasties

Pages 49-61

Caroli, A. (et al.)

Alumina Total Joint Replacement of the First Metatarso Phalangeal Joint: A Biomechanical Study of the Design

Pages 62-66

Giannini, S. (et al.)

Titanium Hydroxilapatite Coated Metacarpo-Phalangeal and Interphalangeal Implant

Pages 67-72

Marinoni, Edoardo Carlo (et al.)

Hydroxyapatite Coated Plate in the Surgical Treatment of the Forearm Non Union with Bone Loss

Pages 73-77

Zinghi, G. F. (et al.)

A Study on HA-Coated Titanium Dental Implants Part I: Stress Analysis of Dental Implant

Pages 78-88

Chen, Jiyong (et al.)

A Study on HA-Coated Titanium Dental Implants Part II Coating Properties in Vivo, Implant Design and Clinical Evaluation

Pages 89-100

Chen, Jiyong (et al.)

Rehabilitation of Radical Mastoidectomy Cavities with Calcium Phosphate Ceramics

Pages 101-106

Bo, Massimo (et al.)

Clinical Results of IMZ Dental Implants

Pages 107-112

Passi, Dr. Piero

Direct Composite-Ceramic Restorations: A Clinical Study

Pages 113-117

Pratt, Carlo (et al.)

Articulation of Ceramic Surfaces Against Polyethylene

Pages 118-123

Streicher, R. M. (et al.)

Hip Anatomical Uncemented Ceramic Arthroplasty (AN.C.A.): Results at a 3 Years Follow-Up

Pages 124-129

Specchia, L. (et al.)

Fluorapatite and Hydroxyapatite Heat-Treated Coatings for Dental Implants

Pages 130-140

Denissen, H. W. (et al.)

Porous Titanium Implants with and without Hydroxyapatite Coating

Pages 141-147

Moroni, A. (et al.)

Surface Reactivity and Biocompatibility of Bulk Glass and Glass Coatings

Pages 148-155

Locardi, Bruno

Plasma Spray Systems for the Deposition of Materials for Biomedical Applications

Pages 156-165

Salito, A. (et al.)

Bioceramics for Maxillofacial Applications

Pages 166-180

Wolke, J. G. C. (et al.)

Nucleation and Growth of Dicalcium Phosphate Dihydrate on Titanium Alloy Substrates

Pages 181-188

Royer, Pascale (et al.)

Relationships between bulk and surface structure and biomaterial biocompatibility

Pages 189-194

Bertoluzza, A. (et al.)

Experimental Study on the Properties of Hydroxyapatite Coated Implants

Pages 195-202

Gabbi, C. (et al.)

Physico-Chemical Characterization of Hydroxyapatite of Unknown Manufacture

Pages 203-205

Ravaglioli, A. (et al.)

Application of Ceramic Composites as Implants: Result and Problem

Pages 206-210

Barinov, S. M. (et al.)

Radioactivity Measurements of Zirconia Powders

Pages 211-216

Capannesi, G. (et al.)

Microstructural Analysis of Bioceramic Materials

Pages 217-222

Bousfield, Brian

Yttria and Calcia Partially Stabilized Zirconia for Biomedical Applications

Pages 223-229

Fassina, P. (et al.)

Mechanical Properties of Plasma Sprayed Ceramic Coatings on Orthopaedic Implants

Pages 230-235

Rieu, J. (et al.)

Plasma-Spray Coating of Titanium Supports with Various Ceramics: A Study at the Interface

Pages 236-243

Krajewski, A. (et al.)

Microstructure and Microanalysis of Bioglasses and Glass-Ceramics from the MgO-CaO-P2O5-SiO2 System with ZrO2

Pages 244-249

Rincon, J. Ma. (et al.)

The Colour of Aluminum Oxide Ceramic Implants

Pages 250-255

Willmann, Gerd

Dental Ceramics and Composite Resins as Restorative Materials

Pages 256-259

Prati, Carlo (et al.)

Reinforced Silver Glass-Ionomer Cement and Light-Cured H.E.M.A. Glass-Ionomer Cement Under Silver-Amalgam Restorations: A Microleakage Study

Pages 260-264

Nucci, Cesare (et al.)

Tensile Bond Strength of Dental Porcelain to Dental Composite Resins

Pages 265-269

Mongiorgi, Romano (et al.)

Glass-Ionomer Cements as Base for Composite Restorations

Pages 270-274

Toschi, Eugenio (et al.)

Systemic Control of Tissue and Cell Reactions Relating to Ceramic Implants

Pages 275-284

Gross, U. (et al.)

In Vitro Cytocompatibility and Tissue Reaction to Ceramics

Pages 285-294

Pizzoferrato, A. (et al.)

Bioceramics in Orthopaedic Surgery: Know How Status and Preliminary Results

Pages 295-301

Giannini, S. (et al.)

Osseointegration of Hydroxyapatite-Coated and Uncoated Bulk Alumina Implants in the Femur of Göttingen Minipigs Mechanical Testing of Bonding Strength

Pages 302-307

Orth, Joachim (et al.)

Thromboresistance of Ti 6AI4V, Coated with a Thin Film of Turbostratic Carbon, for Cardiovascular Applications

Pages 308-316

Gatti, M. A. (et al.)

TCP- Impurities in HA- Granules and Crystallinity Changes in Plasmaflamesprayed HA- Coatings Detected by Spectroscopical Methods and their Consequences

Pages 317-325

Weinländer, M. (et al.)

Longterm Stability of TiN

Pages 326-333

Schaldach, Max (et al.)

In Vitro Toxicity of Fine Particles of Hydroxyapatite

Pages 334-339

Evans, E. J. (et al.)

Differences in Behaviour of Cultured Fetal Rat Osteoblasts Upon Bioglass & Nonreactive Glasses

Pages 340-344

Vrouwenvelder, W. C. A. (et al.)

Complement Activation by Ceramics

Pages 345-352

Dion, Isabelle (et al.)

Sister Chromatid Exchanges (SCEs) and Proliferation Rate Index (PRI): The Application of Cytogenetic Methods in Biocompatibility Field

Pages 353-359

Cannas, Mario (et al.)

Surface Coating of PECVD a-SiC:H to Improve Biocompatibility

Pages 360-365

Bolz, Armin (et al.)

Bone Tissue Response to Hydroxyapatite — Coated and Uncoated Titanium Wire — MESHS in an Infected Site Results of an Animal Experiment

Pages 366-371

Wilke, Axel (et al.)

Biocompatibility of Siliconcarbide and Siliconnitride Ceramics. Results of an Animal Experiment

Pages 372-377

Orth, Joachim (et al.)

Effect of TiO2 Ceramic Precursors on Human Lymphocyte Mitogenesis

Pages 378-382

Piantelli, S. (et al.)

Experimental Study of Two Corals used as Bone Implant in the Sheep

Pages 383-387

Jammet, P. (et al.)

Interfacial Study of Some Inert and Active Ceramics Implanted in Bone

Pages 388-395

Zaffe, D. (et al.)

Surface Charge of the Bioglass Treated by a Physiological Solution

Pages 396-401

Szarska, Stanislawa

In Vivo Study of a New Active Glass for Bone Repair: Short Term Results

Pages 402-407

Gatti, A. M. (et al.)

A Study of Hydroxyapatite Ceramics and its Osteogenesis

Pages 408-416

Xingdong, Zhang (et al.)

Biological Apatite as a Material for Artificial Bone a Preliminary Investigation on its Possibility

Pages 417-421

Hirota, Kazushi

The Design and Manufacture of Joint Prostheses and Stress Distribution

Pages 422-431

Pria, Paolo Dalla

Biomechanical Principles of the Surgical Treatment of the Long Bones Non Unions

Pages 432-437

Zinghi, G. F. (et al.)

Quality Control and Soviet Standards for Bioceramics

Pages 438-443

Dubok, Vitali A. (et al.)

Physico-Chemical Techniques to Characterize Structure and Composition of Interfaces Involving Bioceramics: Potentiality and Limits

Pages 444-453

Garbassi, Fabio (et al.)

Problems Concerning the Industrial Production of Alumina Ceramic Components for Hip Joint Prostheses

Pages 454-460

Dörre, Erhard

Bulk and Thin Film Carbon Materials for Biomedical Applications: Quality Control Criteria and Procedures

Pages 461-470

Vallana, F. (et al.)

Development of an Human Bone Marrow Cell Culture to Test the Cytocompatibility of Bulk Hydroxyapatite Materials

Pages 471-476

Wilke, A. (et al.)

Finite Element Analysis of a Ceramic Hip-Joint Head and its Failure Mode Due to a Crack in the Material

Pages 477-485

Ravagli, E. (et al.)

Research, Planning, and Design of Ear Ossicle Prototypes Based on Al2O3, Hydroxyapatite, and ZrO2

Pages 486-490

Laudadio, P. (et al.)

Preliminary Tests to Determine the Influence of Sterilization and Storage on Compressive Strength of Hydroxyapatite Cylinders

Pages 491-496

Gasser, B. (et al.)

A Study of the Methodology for Treatment of Titanium Substrates to be Coated with Hydroxyapatite

Pages 497-503

Krajewski, A. (et al.)

Stress Analyses of Pull-Off Tests for Strength Measurements of Coatings

Pages 504-509

Soltesz, U. (et al.)

Cell Adhesion Strength to Bioceramics and its Mathematical Model

Pages 510-515

Tateishi, Tetsuya (et al.)