Logo - springer
Slogan - springer

Environmental Sciences - Environmental Chemistry | Environmental Chemistry Letters – incl. option to publish open access

Environmental Chemistry Letters

Environmental Chemistry Letters

Editor-in-Chief: E. Lichtfouse; J. Schwarzbauer; D. Robert

ISSN: 1610-3653 (print version)

Journal no. 10311

Environmental Chemistry Letters

Instructions for Authors

ORCID ID

This publication requires that the corresponding author provides his/her ORCiD ID before proceeding with submission.
For more information about this journal’s ORCiD policy, please visit the ORCID FAQ

Tables 

  • All tables are to be numbered using Arabic numerals.
  • Tables should always be cited in text in consecutive numerical order.
  • For each table, please supply a table caption (title) explaining the components of the table.
  • Identify any previously published material by giving the original source in the form of a reference at the end of the table caption.
  • Footnotes to tables should be indicated by superscript lower-case letters (or asterisks for significance values and other statistical data) and included beneath the table body.

Artwork and Illustrations Guidelines 

Electronic Figure Submission

  • Supply all figures electronically.
  • Indicate what graphics program was used to create the artwork.
  • For vector graphics, the preferred format is EPS; for halftones, please use TIFF format. MSOffice files are also acceptable.
  • Vector graphics containing fonts must have the fonts embedded in the files.
  • Name your figure files with "Fig" and the figure number, e.g., Fig1.eps.

Line Art

Line BW
  • Definition: Black and white graphic with no shading.
  • Do not use faint lines and/or lettering and check that all lines and lettering within the figures are legible at final size.
  • All lines should be at least 0.1 mm (0.3 pt) wide.
  • Scanned line drawings and line drawings in bitmap format should have a minimum resolution of 1200 dpi.
  • Vector graphics containing fonts must have the fonts embedded in the files.

Halftone Art

Halftone gray color
  • Definition: Photographs, drawings, or paintings with fine shading, etc.
  • If any magnification is used in the photographs, indicate this by using scale bars within the figures themselves.
  • Halftones should have a minimum resolution of 300 dpi.

Combination Art

Combined
  • Definition: a combination of halftone and line art, e.g., halftones containing line drawing, extensive lettering, color diagrams, etc.
  • Combination artwork should have a minimum resolution of 600 dpi.

Color Art

  • Color art is free of charge for online publication.
  • If black and white will be shown in the print version, make sure that the main information will still be visible. Many colors are not distinguishable from one another when converted to black and white. A simple way to check this is to make a xerographic copy to see if the necessary distinctions between the different colors are still apparent.
  • If the figures will be printed in black and white, do not refer to color in the captions.
  • Color illustrations should be submitted as RGB (8 bits per channel).

Figure Lettering

  • To add lettering, it is best to use Helvetica or Arial (sans serif fonts).
  • Keep lettering consistently sized throughout your final-sized artwork, usually about 2–3 mm (8–12 pt).
  • Variance of type size within an illustration should be minimal, e.g., do not use 8-pt type on an axis and 20-pt type for the axis label.
  • Avoid effects such as shading, outline letters, etc.
  • Do not include titles or captions within your illustrations.

Figure Numbering

  • All figures are to be numbered using Arabic numerals.
  • Figures should always be cited in text in consecutive numerical order.
  • Figure parts should be denoted by lowercase letters (a, b, c, etc.).
  • If an appendix appears in your article and it contains one or more figures, continue the consecutive numbering of the main text. Do not number the appendix figures,
    "A1, A2, A3, etc." Figures in online appendices (Electronic Supplementary Material) should, however, be numbered separately.

Figure Captions

  • Each figure should have a concise caption describing accurately what the figure depicts. Include the captions in the text file of the manuscript, not in the figure file.
  • Figure captions begin with the term Fig. in bold type, followed by the figure number, also in bold type.
  • No punctuation is to be included after the number, nor is any punctuation to be placed at the end of the caption.
  • Identify all elements found in the figure in the figure caption; and use boxes, circles, etc., as coordinate points in graphs.
  • Identify previously published material by giving the original source in the form of a reference citation at the end of the figure caption.

Figure Placement and Size

  • Figures should be submitted separately from the text, if possible.
  • When preparing your figures, size figures to fit in the column width.
  • For most journals the figures should be 39 mm, 84 mm, 129 mm, or 174 mm wide and not higher than 234 mm.
  • For books and book-sized journals, the figures should be 80 mm or 122 mm wide and not higher than 198 mm.

Permissions

If you include figures that have already been published elsewhere, you must obtain permission from the copyright owner(s) for both the print and online format. Please be aware that some publishers do not grant electronic rights for free and that Springer will not be able to refund any costs that may have occurred to receive these permissions. In such cases, material from other sources should be used.

Accessibility

In order to give people of all abilities and disabilities access to the content of your figures, please make sure that
  • All figures have descriptive captions (blind users could then use a text-to-speech software or a text-to-Braille hardware)
  • Patterns are used instead of or in addition to colors for conveying information (colorblind users would then be able to distinguish the visual elements)
  • Any figure lettering has a contrast ratio of at least 4.5:1

Open Choice 

Open Choice allows you to publish open access in more than 1850 Springer Nature journals, making your research more visible and accessible immediately on publication.
Benefits:
  • Increased researcher engagement: Open Choice enables access by anyone with an internet connection, immediately on publication.
  • Higher visibility and impact: In Springer hybrid journals, OA articles are accessed 4 times more often on average, and cited 1.7 more times on average*.
  • Easy compliance with funder and institutional mandates: Many funders require open access publishing, and some take compliance into account when assessing future grant applications.
It is easy to find funding to support open access – please see our funding and support pages for more information.
*) Within the first three years of publication. Springer Nature hybrid journal OA impact analysis, 2018.

Copyright and license term – CC BY

Open Choice articles do not require transfer of copyright as the copyright remains with the author. In opting for open access, the author(s) agree to publish the article under the Creative Commons Attribution License.

Ethical Responsibilities of Authors 

This journal is committed to upholding the integrity of the scientific record. As a member of the Committee on Publication Ethics (COPE) the journal will follow the COPE guidelines on how to deal with potential acts of misconduct.
Authors should refrain from misrepresenting research results which could damage the trust in the journal, the professionalism of scientific authorship, and ultimately the entire scientific endeavour. Maintaining integrity of the research and its presentation can be achieved by following the rules of good scientific practice, which include:
  • The manuscript has not been submitted to more than one journal for simultaneous consideration.
  • The manuscript has not been published previously (partly or in full), unless the new work concerns an expansion of previous work (please provide transparency on the re-use of material to avoid the hint of text-recycling (“self-plagiarism”)).
  • A single study is not split up into several parts to increase the quantity of submissions and submitted to various journals or to one journal over time (e.g. “salami-publishing”).
  • No data have been fabricated or manipulated (including images) to support your conclusions
  • No data, text, or theories by others are presented as if they were the author’s own (“plagiarism”). Proper acknowledgements to other works must be given (this includes material that is closely copied (near verbatim), summarized and/or paraphrased), quotation marks are used for verbatim copying of material, and permissions are secured for material that is copyrighted.
    Important note: the journal may use software to screen for plagiarism.
  • Consent to submit has been received explicitly from all co-authors, as well as from the responsible authorities - tacitly or explicitly - at the institute/organization where the work has been carried out, before the work is submitted.
  • Authors whose names appear on the submission have contributed sufficiently to the scientific work and therefore share collective responsibility and accountability for the results.
  • Authors are strongly advised to ensure the correct author group, corresponding author, and order of authors at submission. Changes of authorship or in the order of authors are not accepted after acceptance of a manuscript.
  • Adding and/or deleting authors and/or changing the order of authors at revision stage may be justifiably warranted. A letter must accompany the revised manuscript to explain the reason for the change(s) and the contribution role(s) of the added and/or deleted author(s). Further documentation may be required to support your request.
  • Requests for addition or removal of authors as a result of authorship disputes after acceptance are honored after formal notification by the institute or independent body and/or when there is agreement between all authors.
  • Upon request authors should be prepared to send relevant documentation or data in order to verify the validity of the results. This could be in the form of raw data, samples, records, etc. Sensitive information in the form of confidential proprietary data is excluded.
If there is a suspicion of misconduct, the journal will carry out an investigation following the COPE guidelines. If, after investigation, the allegation seems to raise valid concerns, the accused author will be contacted and given an opportunity to address the issue. If misconduct has been established beyond reasonable doubt, this may result in the Editor-in-Chief’s implementation of the following measures, including, but not limited to:
  • If the article is still under consideration, it may be rejected and returned to the author.
  • If the article has already been published online, depending on the nature and severity of the infraction, either an erratum will be placed with the article or in severe cases complete retraction of the article will occur. The reason must be given in the published erratum or retraction note. Please note that retraction means that the paper is maintained on the platform, watermarked "retracted" and explanation for the retraction is provided in a note linked to the watermarked article.
  • The author’s institution may be informed.

Read this Journal on Springerlink

For authors and editors


  • Journal Citation Reports®
    2016 Impact Factor
  • 3.594
  • Aims and Scope

    Aims and Scope

    Close

    Conference of interest:
    First Annual Conference on Food and Bio Nanotechnoloyg (ConFoN 2018), August 16 – 18, 2018
    For more information please visit: http://confon.iifpt.edu.in/

    Environmental Chemistry Letters is located at the interfaces of geology, chemistry, physics and biology. Articles are of high importance to the study of natural and engineered environments. Environmental Chemistry Letters publishes original and review articles of outstanding significance in the following fields:

    - Characterisation of natural and affected environments;
    - Behaviour, prevention, treatment and control of mineral, organic and radioactive pollutants;
    - Interfacial studies involving media such as soil, sediment, water, air, organism, and food;
    - Green chemistry, environmentally friendly synthetic pathways, and alternative fuels;
    - Ecotoxicology and risk assessment;
    - Environmental processes and modelling;
    - Environmental technologies, remediation and control;
    - Environmental analytical chemistry, biomolecular tools and tracers e.g. stable isotopes

     

  • Submit Online
  • Open Choice - Your Way to Open Access
  • Instructions for Authors (Part 1) (pdf, ...
  • Instructions for Authors (Part 2)

    Environmental Chemistry Letters

    Close

  • Author Academy: Training for Authors
  • Copyright Information

    Copyright Information

    Close

    Copyright Information

    For Authors

    Submission of a manuscript implies: that the work described has not been published before (except in form of an abstract or as part of a published lecture, review or thesis); that it is not under consideration for publication elsewhere; that its publication has been approved by all co-authors, if any, as well as – tacitly or explicitly – by the responsible authorities at the institution where the work was carried out.

    Author warrants (i) that he/she is the sole owner or has been authorized by any additional copyright owner to assign the right, (ii) that the article does not infringe any third party rights and no license from or payments to a third party is required to publish the article and (iii) that the article has not been previously published or licensed. The author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. Transfer of copyright to Springer (respective to owner if other than Springer) becomes effective if and when a Copyright Transfer Statement is signed or transferred electronically by the corresponding author. After submission of the Copyright Transfer Statement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted by Springer.

    The copyright to this article, including any graphic elements therein (e.g. illustrations, charts, moving images), is assigned for good and valuable consideration to Springer effective if and when the article is accepted for publication and to the extent assignable if assignability is restricted for by applicable law or regulations (e.g. for U.S. government or crown employees).

    The copyright assignment includes without limitation the exclusive, assignable and sublicensable right, unlimited in time and territory, to reproduce, publish, distribute, transmit, make available and store the article, including abstracts thereof, in all forms of media of expression now known or developed in the future, including pre- and reprints, translations, photographic reproductions and microform. Springer may use the article in whole or in part in electronic form, such as use in databases or data networks for display, print or download to stationary or portable devices. This includes interactive and multimedia use and the right to alter the article to the extent necessary for such use.

    Authors may self-archive the Author's accepted manuscript of their articles on their own websites. Authors may also deposit this version of the article in any repository, provided it is only made publicly available 12 months after official publication or later. He/she may not use the publisher's version (the final article), which is posted on SpringerLink and other Springer websites, for the purpose of self-archiving or deposit. Furthermore, the Author may only post his/her version provided acknowledgement is given to the original source of publication and a link is inserted to the published article on Springer's website. The link must be accompanied by the following text: "The final publication is available at link.springer.com".

    Prior versions of the article published on non-commercial pre-print servers like arXiv.org can remain on these servers and/or can be updated with Author's accepted version. The final published version (in pdf or html/xml format) cannot be used for this purpose. Acknowledgement needs to be given to the final publication and a link must be inserted to the published article on Springer's website, accompanied by the text "The final publication is available at link.springer.com". Author retains the right to use his/her article for his/her further scientific career by including the final published journal article in other publications such as dissertations and postdoctoral qualifications provided acknowledgement is given to the original source of publication.

    Author is requested to use the appropriate DOI for the article. Articles disseminated via link.springer.com are indexed, abstracted and referenced by many abstracting and information services, bibliographic networks, subscription agencies, library networks, and consortia.

    For Readers

    While the advice and information in this journal is believed to be true and accurate at the date of its publication, neither the authors, the editors, nor the publisher can accept any legal responsibility for any errors or omissions that may have been made. The publisher makes no warranty, express or implied, with respect to the material contained herein.

    All articles published in this journal are protected by copyright, which covers the exclusive rights to reproduce and distribute the article (e.g., as offprints), as well as all translation rights. No material published in this journal may be reproduced photographically or stored on microfilm, in electronic data bases, video disks, etc., without first obtaining written permission from the publisher (respective the copyright owner if other than Springer). The use of general descriptive names, trade names, trademarks, etc., in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.

    Springer has partnered with Copyright Clearance Center's RightsLink service to offer a variety of options for reusing Springer content. For permission to reuse our content please locate the material that you wish to use on link.springer.com or on springerimages.com and click on the permissions link or go to copyright.com, then enter the title of the publication that you wish to use. For assistance in placing a permission request, Copyright Clearance Center can be connected directly via phone: +1-855-239-3415, fax: +1-978-646-8600, or e-mail: info@copyright.com.


    © Springer-Verlag Berlin Heidelberg