Logo - springer
Slogan - springer

Engineering - Signals & Communication | 3D Research (Editorial Board)

3D Research

3D Research

Editor-in-Chief: Eun-Soo Kim

ISSN: 2092-6731 (electronic version)

Journal no. 13319


Eun-Soo Kim, Kwangwoon University, Korea, Republic Of

Editorial Board   

AbdelHadi Kassiba, Université du Maine, France
Akira Ishibashi, Hokkaido University, Japan
Alexander Govorov, Ohio University, United States
Andreas Kolb, University of Siegen, Germany
Byoungho Lee, Seoul National University, Korea, Republic Of
Cardinal Warde, Massachusetts Institute of Technology, United States
Ching-Ting Lee, National Cheng-Kung University, Taiwan
Christian Wöhler, Technical University of Dortmund, Germany
Chunlei Guo, University of Rochester, United States
Dongfeng Xue, Chinese Academy of Sciences, China
Eli Brenner, Vrije Universiteit, Netherlands
Eva Maria Pellicer Vilà, Universitat Autònoma de Barcelona, Spain
Gan Moog Chow, National University of Singapore, Sinapore
Gang-Yu Liu, University of California, Davis, USA
Georgios A. Triantafyllidis, Applied Informatics and Multimedia, Greece
Hiroshi Yoshikawa, Nihon University, Japan
Ioan Baldea, Universität Heidelberg, Germany
Janusz Konrad, Boston University, United States
John Caulfield, Diversified Research Corporation, United States
Jordi Sort Viñas, Universitat Autònoma de Barcelona, Spain
Joseph Rosen, Ben-Gurion University of the Negev, Israel
Kelvin Wagner, University of Colorado, United States
Kwang-Hoon Sohn, Yonsei University, Korea, Republic Of
Lambertus Hesselink, Stanford University, United States
Manuel Martinez-Corral, University of Valencia, Spain
Martin J. Richardson, De Montfort University, United Kingdom
Masayoshi Higuchi, National Institute for Material Science, Japan
Mikael Sjödahl, Luleå University of Technology, Sweden
Nam Kim, Chungbuk National Univ., Korea, Republic Of
Nickolas S. Sapidis, University of Western Macedonia, Greece
Osamu Matoba, Kobe University, Japan
Pietro Ferraro, Istituto Nazionale di Ottica Applicata, Italy
Pooi See Lee, Nanyang Technological University, Singapore
Simon Ringer, University of Sydney, Australia
Stefan Seeger, University of Zurich, Switzerland
Takashi Kawai, Waseda University, Japan
Takeharu Haino, Hiroshima University, Japan
Thomas Naughton, National University of Ireland Maynooth, Ireland
Tiejun Huang, Peking University, China
Ting-Chung Poon, Virginia Tech, United States
Tomohiro Amemiya, Tokyo Institute of Technology, Japan
Toshio Honda, Chiba University, Japan
Toyohito Yatagai, Utsunomiya University, Japan
Vladimir V. Petrov, Saratov State University, Russian Federation
Wolfgang Osten, University of Stuttgart, Germany
Xiao-Tao Hao, Shandong University, China
Xingjun Wang, Tsinghua University, China
Yi-Pai Huang, National Chiao Tung University, Taiwan
Yonggang Zhao, Tsinghua University, China
Yongli Gao, University of Rochester, United States
Yong Zhang, University of North Carolina at Charlotte, United States
Yo-Sung Ho, Gwangju Institute of Science and Technology, Korea, Republic Of
Zhiming Wang, University of Electronic Science and Technology of China, China

Managing Editor
Jihoon Lee, Kwangwoon University, Korea, Republic Of

Read this Journal on Springerlink

For authors and editors

  • Aims and Scope

    Aims and Scope


    3D Research (3DR) is the first journal devoted to materials and technologies for the generation, processing, and display of information in three dimensions. The journal spans disciplines and applications areas, emphasizing research that seeks to enable technological developments in the field of 3D and to further the goal of unifying 3D research in engineering, physics, materials science, chemistry, as well as psychology and neuroscience.

    3DR provides an international forum for the rapid publication and dissemination of peer-reviewed research. Original research papers are published as 3DR Express. 3DR Commentaries are invited personal viewpoints and perspectives addressing topics of general interest to the 3D community and highlighting new areas of science. 3DR Commentaries are typically commissioned by the Editorial Board but unsolicited submissions are also welcome. 3DR Review is a format that focuses on the summarization of currently well-established theoretical and experimental results. 3DR Reviews are commissioned solely by the Editorial Board.

    Key features:

    • First journal to focus on the burgeoning field of 3D information science and technology 
    • Emphasizes research that seeks to uncover the science underlying technological advances  
    • Covers all application areas from consumer electronics to biomedical imaging
    • Offers rapid review and publication
    • Availability through SpringerLink ensures worldwide visibility for your work

  • Submit Online
  • Open Choice - Your Way to Open Access
  • Instructions for Authors

    Instructions for Authors


  • Author Tools (LaTeX) (docx, 14 kB)
  • English Language Editing

    English Language Editing


  • Author Academy: Training for Authors
  • English Language Editing

    English Language Editing


  • CCMR 2019 (pdf, 138 kB)
  • Copyright Information

    Copyright Information


    Copyright Information

    For Authors

    Submission of a manuscript implies: that the work described has not been published before (except in form of an abstract or as part of a published lecture, review or thesis); that it is not under consideration for publication elsewhere; that its publication has been approved by all co-authors, if any, as well as – tacitly or explicitly – by the responsible authorities at the institution where the work was carried out.

    Author warrants (i) that he/she is the sole owner or has been authorized by any additional copyright owner to assign the right, (ii) that the article does not infringe any third party rights and no license from or payments to a third party is required to publish the article and (iii) that the article has not been previously published or licensed. The author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. Transfer of copyright to Springer (respective to owner if other than Springer) becomes effective if and when a Copyright Transfer Statement is signed or transferred electronically by the corresponding author. After submission of the Copyright Transfer Statement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted by Springer.

    The copyright to this article, including any graphic elements therein (e.g. illustrations, charts, moving images), is assigned for good and valuable consideration to Springer effective if and when the article is accepted for publication and to the extent assignable if assignability is restricted for by applicable law or regulations (e.g. for U.S. government or crown employees).

    The copyright assignment includes without limitation the exclusive, assignable and sublicensable right, unlimited in time and territory, to reproduce, publish, distribute, transmit, make available and store the article, including abstracts thereof, in all forms of media of expression now known or developed in the future, including pre- and reprints, translations, photographic reproductions and microform. Springer may use the article in whole or in part in electronic form, such as use in databases or data networks for display, print or download to stationary or portable devices. This includes interactive and multimedia use and the right to alter the article to the extent necessary for such use.

    Authors may self-archive the Author's accepted manuscript of their articles on their own websites. Authors may also deposit this version of the article in any repository, provided it is only made publicly available 12 months after official publication or later. He/she may not use the publisher's version (the final article), which is posted on SpringerLink and other Springer websites, for the purpose of self-archiving or deposit. Furthermore, the Author may only post his/her version provided acknowledgement is given to the original source of publication and a link is inserted to the published article on Springer's website. The link must be accompanied by the following text: "The final publication is available at link.springer.com".

    Prior versions of the article published on non-commercial pre-print servers like arXiv.org can remain on these servers and/or can be updated with Author's accepted version. The final published version (in pdf or html/xml format) cannot be used for this purpose. Acknowledgement needs to be given to the final publication and a link must be inserted to the published article on Springer's website, accompanied by the text "The final publication is available at link.springer.com". Author retains the right to use his/her article for his/her further scientific career by including the final published journal article in other publications such as dissertations and postdoctoral qualifications provided acknowledgement is given to the original source of publication.

    Author is requested to use the appropriate DOI for the article. Articles disseminated via link.springer.com are indexed, abstracted and referenced by many abstracting and information services, bibliographic networks, subscription agencies, library networks, and consortia.

    For Readers

    While the advice and information in this journal is believed to be true and accurate at the date of its publication, neither the authors, the editors, nor the publisher can accept any legal responsibility for any errors or omissions that may have been made. The publisher makes no warranty, express or implied, with respect to the material contained herein.

    All articles published in this journal are protected by copyright, which covers the exclusive rights to reproduce and distribute the article (e.g., as offprints), as well as all translation rights. No material published in this journal may be reproduced photographically or stored on microfilm, in electronic data bases, video disks, etc., without first obtaining written permission from the publisher (respective the copyright owner if other than Springer). The use of general descriptive names, trade names, trademarks, etc., in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.

    Springer has partnered with Copyright Clearance Center's RightsLink service to offer a variety of options for reusing Springer content. For permission to reuse our content please locate the material that you wish to use on link.springer.com or on springerimages.com and click on the permissions link or go to copyright.com, then enter the title of the publication that you wish to use. For assistance in placing a permission request, Copyright Clearance Center can be connected directly via phone: +1-855-239-3415, fax: +1-978-646-8600, or e-mail: info@copyright.com.

    © 3D Research Center, Kwangwoon University and Springer-Verlag Berlin Heidelberg

Alerts for this journal


Get the table of contents of every new issue published in 3D Research.