Logo - springer
Slogan - springer

New & Forthcoming Titles | International Journal of Precision Engineering and Manufacturing-Green Technology

International Journal of Precision Engineering and Manufacturing-Green Technology

International Journal of Precision Engineering and Manufacturing-Green Technology

Editor-in-Chief: Sung-Hoon Ahn

ISSN: 2288-6206 (print version)
ISSN: 2198-0810 (electronic version)

Journal no. 40684

Instruction for Authors

1. Instruction for submission 

- Authors are required to use the template prepared in Microsoft Word format for the International Journal of Precision Engineering and Manufacturing-Green Technology in writing manuscripts, and to submit the complete manuscript to
- Style: Manuscript should be submitted in English, and the presentation as well as the grammar should be clear and comprehensive. Manuscripts that are commercial in nature will not be considered. SI units should be used unless to do so is not feasible or would result in a serious loss of clarity.
- Title page listing the paper title, the name(s) of the author(s), and the affiliation of each author. The corresponding author should be identified by #. His/her e-mail, tel., fax number should be listed in the footnote.
- Abstract (200 words maximum) should be a summary of the paper and not an introduction. Because the abstract may be used in abstracting journals, it should be self-contained (i.e., no numerical references) and substantive in nature, presenting concisely the objectives, methodology used, results obtained, and their significance.
- Subject terms or keywords are required, maximum of six in alphabetical order.
- Text should be spaced and typed in accordance with the provided template.
- Equations should be typed. Define characters that might be confused (such as ell/one, nu/vee, or omega/w) at first usage.
- References to published literature must be numbered consecutively in the order of their citation in the text. The number should be written as an upper script. Private communications or unpublished reports should be treated as references. Use the following formats for books or journal articles:
  • Books: Author(s) (list last name, then first and middle initials), book title, publisher, city, and year published. When citing a paper chapter in a book, list the chapter in quotes, and the book, plus the page numbers. Example: Hall, J.A., “Robust Regression and Outlier Detection,” John Wiley & Sons, pp.134-150, 1987.
  • Journals: Author(s) (list last name, then first and middle initials), paper title in quote, journal name (abbreviate only well-known journals), volume number, issue number, inclusive page numbers, and year published. Example: Bluzer, N. and Jensen, A. S., “Current Readout of Infrared Detectors,” Opt. Eng., Vol.26, No.3, pp.241-248, 1987.
- Footnotes: Use textual footnotes only when necessary to present important documentary or explanatory material whose inclusion in the text would be distracting.
- Figures should be prepared for maximum contrast and care is required to avoid aliasing when printed out. They should be inserted at upper and/or lower positions in the main text. No coloring and unnecessary shading are permitted in figures.

2. Publication charges 

- A certain amount of fee per publication will be required. These charges are financial contributions from authors’ institution to help defray the cost of publishing research results.
- Papers submitted from outside of Korea, i.e. written by foreign corresponding author, are exempted from the publication charges temporarily.
  • Publication fees:
    1. KRW 360,000 for each paper and KRW 100,000 per additional page (over six pages for regular paper, short communication and over eight pages for review paper) will be charged.
    2. Again, papers submitted from outside of Korea will be exempted from the publication charges temporarily, but USD 50 per additional page (over six pages for regular paper, short communication and over eight pages for review paper) will be charged.
    3. Publication fees will be charged upon acceptance of paper by editorial board, and authors are asked to complete the payment within 15 days after request.
  • Depositor: Korean Society for Precision Engineering
    Woori Bank: 143-136001-01-001

English Language Editing 

For editors and reviewers to accurately assess the work presented in your manuscript you need to ensure the English language is of sufficient quality to be understood. If you need help with writing in English you should consider:
  • Asking a colleague who is a native English speaker to review your manuscript for clarity.
  • Visiting the English language tutorial which covers the common mistakes when writing in English.
  • Using a professional language editing service where editors will improve the English to ensure that your meaning is clear and identify problems that require your review. Two such services are provided by our affiliates Nature Research Editing Service and American Journal Experts. Springer authors are entitled to a 10% discount on their first submission to either of these services, simply follow the links below.
Please note that the use of a language editing service is not a requirement for publication in this journal and does not imply or guarantee that the article will be selected for peer review or accepted.
If your manuscript is accepted it will be checked by our copyeditors for spelling and formal style before publication.

.

为便于编辑和评审专家准确评估您稿件中陈述的研究工作,您需要确保您的英语语言质量足以令人理解。如果您需要英文写作方面的帮助,您可以考虑:
● 请一位以英语为母语的同事审核您的稿件是否表意清晰。
● 查看一些有关英语写作中常见语言错误的教程。
● 使用专业语言编辑服务,编辑人员会对英语进行润色,以确保您的意思表达清晰,并识别需要您复核的问题。我们的附属机构 Nature Research Editing Service 和合作伙伴 American Journal Experts 即可提供此类服务。
请注意,使用语言编辑服务并非在期刊上发表文章的必要条件,同时也并不意味或保证文章将被选中进行同行评议或被接受。
如果您的稿件被接受,在发表之前,我们的文字编辑会检查您的文稿拼写是否规范以及文体是否正式。

.

エディターと査読者があなたの論文を正しく評価するには、使用されている英語の質が十分に高いことが必要とされます。英語での論文執筆に際してサポートが必要な場合には、次のオプションがあります:
・英語を母国語とする同僚に、原稿で使用されている英語が明確であるかをチェックしてもらう。
・英語で執筆する際のよくある間違いに関する英語のチュートリアルを参照する。
・プロの英文校正サービスを利用する。校正者が原稿の意味を明確にしたり、問題点を指摘し、英語の質を向上させます。Nature Research Editing Service とAmerican Journal Experts の2つは弊社と提携しているサービスです。Springer の著者は、いずれのサービスも初めて利用する際には10%の割引を受けることができます。以下のリンクを参照ください。
英文校正サービスの利用は、投稿先のジャーナルに掲載されるための条件ではないこと、また論文審査や受理を保証するものではないことに留意してください。
原稿が受理されると、出版前に弊社のコピーエディターがスペルと体裁のチェックを行います。

.

영어 원고의 경우, 에디터 및 리뷰어들이 귀하의 원고에 실린 결과물을 정확하게 평가할 수 있도록, 그들이 충분히 이해할 수 있을 만한 수준으로 작성되어야 합니다. 만약 영작문과 관련하여 도움을 받기를 원하신다면 다음의 사항들을 고려하여 주십시오:
• 귀하의 원고의 표현을 명확히 해줄 영어 원어민 동료를 찾아서 리뷰를 의뢰합니다.
• 영어 튜토리얼 페이지에 방문하여 영어로 글을 쓸 때 자주하는 실수들을 확인합니다.
• 리뷰에 대비하여, 원고의 의미를 명확하게 해주고 리뷰에서 요구하는 문제점들을 식별해서 영문 수준을 향상시켜주는 전문 영문 교정 서비스를 이용합니다. Nature Research Editing Service와 American Journal Experts에서 저희와 협약을 통해 서비스를 제공하고 있습니다. Springer 저자들이 본 교정 서비스를 첫 논문 투고를 위해 사용하시는 경우 10%의 할인이 적용되며, 아래의 링크를 통하여 확인이 가능합니다.
영문 교정 서비스는 게재를 위한 요구사항은 아니며, 해당 서비스의 이용이 피어 리뷰에 논문이 선택되거나 게재가 수락되는 것을 의미하거나 보장하지 않습니다.
원고가 수락될 경우, 출판 전 저희측 편집자에 의해 원고의 철자 및 문체를 검수하는 과정을 거치게 됩니다.

3. Communication 

- Any inquiry and suggestions are welcome to be directed to the KSPE Headquarter Office at the e-mail address of ijpem@kspe.or.kr

Research Data Policy 

A submission to the journal implies that materials described in the manuscript, including all relevant raw data, will be freely available to any researcher wishing to use them for non-commercial purposes, without breaching participant confidentiality.
The journal strongly encourages that all datasets on which the conclusions of the paper rely should be available to readers. We encourage authors to ensure that their datasets are either deposited in publicly available repositories (where available and appropriate) or presented in the main manuscript or additional supporting files whenever possible. Please see Springer Nature’s information on recommended repositories.
General repositories - for all types of research data - such as figshare and Dryad may be used where appropriate.
Datasets that are assigned digital object identifiers (DOIs) by a data repository may be cited in the reference list. Data citations should include the minimum information recommended by DataCite: authors, title, publisher (repository name), identifier.
Where a widely established research community expectation for data archiving in public repositories exists, submission to a community-endorsed, public repository is mandatory. Persistent identifiers (such as DOIs and accession numbers) for relevant datasets must be provided in the paper.

Data availability

The journal encourages authors to provide a statement of Data availability in their article. Data availability statements should include information on where data supporting the results reported in the article can be found, including, where applicable, hyperlinks to publicly archived datasets analysed or generated during the study. Data availability statements can also indicate whether data are available on request from the authors and where no data are available, if appropriate.
Data Availability statements can take one of the following forms (or a combination of more than one if required for multiple datasets):
1. The datasets generated during and/or analysed during the current study are available in the [NAME] repository, [PERSISTENT WEB LINK TO DATASETS]
2. The datasets generated during and/or analysed during the current study are not publicly available due [REASON WHY DATA ARE NOT PUBLIC] but are available from the corresponding author on reasonable request.
3. The datasets generated during and/or analysed during the current study are available from the corresponding author on reasonable request.
4.Data sharing not applicable to this article as no datasets were generated or analysed during the current study
5. All data generated or analysed during this study are included in this published article [and its supplementary information files].
More examples of template data availability statements, which include examples of openly available and restricted access datasets, are available:
Springer Nature provides a research data policy support service for authors and editors, which can be contacted at researchdata@springernature.com.
This service provides advice on research data policy compliance and on finding research data repositories. It is independent of journal, book and conference proceedings editorial offices and does not advise on specific manuscripts.

Read this Journal on Springerlink

For authors and editors


  • Journal Citation Reports®
    2016 Impact Factor
  • 3.494
  • Aims and Scope

    Aims and Scope

    Close

    International Journal of Precision Engineering and Manufacturing-Green Technology accepts original contributions on all aspects of green manufacturing. The journal's specific focus areas include, but are not limited to:  

    1.
    Energy Saving and Waste Reduction in Manufacturing Processes
    Subtractive Processes (Machining, Grinding, Laser, Non-traditional Machining, etc)
    Additive Processes (Welding, Bonding, 3D Printing, R2R, etc)
    Material Transform Processes (Forming, Casting, etc)
    Material Trans-property Processes (Heat Treatment, Surface Treatment, etc)
    Hybrid Processes
    Multi-scale Processes

    2.
    Manufacturing of New and Renewable Energy Devices
    Solar/PV
    Wind/Wave/Hydro
    Hydrogen
    Bio
    Fuel Cell
    Battery and Capacitor
    Energy Harvesting

    3.
    Design and Manufacturing of Green Products
    Machinery (H/W, S/W, Process Planning, etc)
    Automobile (Hybrid, Electric Vehicle, etc)
    Robots (H/W, S/W, Biomimetic, etc)
    Electronics/Display
    Design for Manufacturing (DFM, DFE, DFA)
    Product Using Appropriate Technology

    4.
    Materials for Green Manufacturing
    Lightweight Materials and Structures
    Muti-functional Materials
    Eco-Friendly Materials
    Bio/Recyclable Materials
    Energy Harvesting/Conversion/Storage Materials
    Functionally Graded Materials and Structures for Energy Saving
    Smart Materials and Systems
    Micro-/Nano-materials for Green Applications

    5.
    Management and Policy for Sustainable Manufacturing
    LCA/EIA
    Energy Monitoring and Control
    Energy and Environment Management
    Government Policy and Strategy
    Green Factory
    Smart Grid and Smart Meter

  • Submit Online
  • Open Choice - Your Way to Open Access
  • Impact Factor 2016 (pdf, 1.1 MB)
  • Instructions for Authors

    Instruction for Authors

    Close

Services for the Journal

Additional information