Logo - springer
Slogan - springer

Engineering - Electronics & Electrical Engineering | Circuits, Systems and Signal Processing (Editorial Board)

We’re working on a new version of this journal site - preview it now
Circuits, Systems, and Signal Processing

Circuits, Systems, and Signal Processing

Editor-in-Chief: M.N.S. Swamy

ISSN: 0278-081X (print version)
ISSN: 1531-5878 (electronic version)

Journal no. 34

M.N.S. Swamy
Department of Electrical and Computer Engineering
Concordia University
1455 de Maisonneuve Blvd. West
Montreal, Quebec H3G1M8, Canada
Fax: (514) 848-2802
E-mail: editorcssp@ece.concordia.ca

Editor-in-Chief Emeritus
Armen H. Zemanian
State University of New York at Stony Brook
Stony Brook, NY, USA

Editorial Advisory Board
Vasudev K. Aatre, Indian Institute of Science, Bangalore, India
Paulo S. R. Diniz, COPPE/Federal University of Río de Janeiro, Río de Janeiro, Brazil
Subhash Kak, Oklahoma State University, Stillwater, OK, USA
George S. Moschytz, Swiss Federal Institute of Technology, Zurich, Switzerland
Robert W. Newcomb, University of Maryland, College Park, MD, USA
Josef A. Nossek, Technische Universität München, München, Germany
T. R. Viswanathan, University of Texas at Austin, Austin, TX, USA

Associate Editors
M. T. Abuelmaatti, King Fahd University of Petroleum and Minerals, Dhahran, Saudi Arabia
Pan Agathoklis, University of Victoria, Victoria, BC, Canada
Fang Cai, Marvell Semiconductor, Santa Clara, CA, USA
Huawei Chen, Nanjing University of Aeronautics and Astronautics, China
Renato J. Cintra, Federal University of Pernambuco, Brazil
Josue Rodolfo Cuevas, Masterwork Aoitek Tech Corp, Ltd., Taipei, Taiwan
Ali Akber Dewan, Concordia University, Montreal, QC, Canada
Hongli Dong, University of Duisburg-Essen, Duisburg, Germany
Weisheng Dong, Xidian University, Xi'an, China
Ke-Lin Du, Concordia University, Montreal, QC, Canada
Andrzej Dzielinski, Warsaw University of Technology, Warsaw, Poland
Shaikh A. Fattah, Bangladesh University of Engineering and Technology, Dhaka, Bangladesh
Huijun Gao, Harbin Institute of Technology, Harbin, People's Republic of China
Yujie Gu, Temple University, Philadelphia, PA, USA
Jin He, Shanghai Jiaotong University, Shanghai, China
Ahmad Hiasat, Princess Sumaya University of Technology, Amman, Jordan
Chao-Tsung Huang, National Tsing Hua University, Hsin Chu, Taiwan
He Huang, Soochow University, Suzhou, China
Asutosh Kar, Indian Institute of Information Technology, Design, and Manufacturing, Chennai, India
Ashraf Kassim, National University of Singapore, Singapore
Fabian Khateb, Brno University of Technology, Brno, Czech Republic
Byung-Gyu Kim, SunMoon University, Chungnam, Korea
Tomasz Kulej, Czestochowa University of Technology, Poland
Bo Li, Qualcomm Incorporated, San Diego, CA, USA
Chunguo Li, Southeast University, Nanjing, China
Hongyi Li, Bohai University, Liaoning, China
Tao Li, Nanjing University of Information Science and Technology, Nanjing, China
Weiyao Lin, Shanghai Jiao Tong University, Shanghai, China
Wing-Kuen Ling, University of Lincoln, Lincoln, UK
Weijian Liu, Wuhan Electronic Information Institute, Wuhan, China
S. M. Mahbubur Rahman, Bangladesh University of Engineering and Technology, Dhaka, Bangladesh
Ian Vince McLoughlin, University of Kent, Kent, UK
Pramod K. Meher, Nanyang Technological University, Singapore
P. V. Ananda Mohan, Electronic Corporation of India Limited, Bangalore, India
B.K. Mohanty, Jaypee University of Engineering & Technology, Guna, India
Ganesh R. Naik, Western Sydney University, Kingswood, Australia
T. Ogunfunmi, Santa Clara University, Santa Clara, CA, USA
Costas Psychalinos, University of Patras, Rio Patras, Greece
K.M.M. Prabhu, Indian Institute of Technology, Madras, India
Vinod A. Prasad, Indian Institute of Technology, Palakkad, India
S. R. Mahadeva Prasanna, Indian Institute of Technology, Gauhati, India
A. Benjamin Premkumar, University of Malaya, Kaula Lumpur, Malaysia
Suvendu Rup, International Institute of Information Technology, Bhubaneswar, Odisha, India
M. Sahidullah, MULTISPEECH, Inria, Villers-lès-Nancy, France
Raj Senani, Netaji Subhas Institute of Technology, New Delhi, India
Bo Shen, University of Duisburg-Essen, Duisburg, Germany
Debashis Sen, Indian Institute of Technology, Kharagpur, India
Peng Shi, University of Glamorgan, Pontypridd, Wales, UK
Yang Shi, University of Victoria, Victoria, BC, Canada
Ahmad M. Soliman, Cairo University, Cairo, Egypt
Xingyuan Tong, Xi'an University of  Posts and Telecommunications, Xi'an, China
S. Umesh, Indian Institute of Technology, Madras, Chennai, India
C.A. Wijenayake, University of New South Wales, Sydney, Australia
Ligang Wu, Harbin Institute of Technology, Harbin, People's Republic of China
Jinjian Wu, Xidian University, Xi'an, China
Rajeev Yadav, ODS Medical, Quebec, Canada
Rongni Yang, Shandong University, Jinan, China
Thomas Yang, Embry-Riddle Aeronautical University, Daytona Beach, FL, USA
Winben Ye, Shenzhen University, Shenzhen, China
Yao Zhao, Beijing Jiaotong University, Beijing, China
Wei Xing Zheng, University of Sydney, Penrith, Australia
Yuanjin Zheng, Nanyang Technological University, Singapore

Read this Journal on Springerlink

For authors and editors

  • Journal Citation Reports®
    2017 Impact Factor
  • 1.998
  • Aims and Scope

    Aims and Scope


    Rapid developments in the analog and digital processing of signals for communication, control, and computer systems have made the theory of electrical circuits and signal processing a burgeoning area of research and design. The aim of Circuits, Systems, and Signal Processing (CSSP) is to help meet the needs of outlets for significant research papers and state-of-the-art review articles in the area.

    The scope of the journal is broad, ranging from mathematical foundations to practical engineering design. It encompasses, but is not limited to, such topics as linear and nonlinear networks, distributed circuits and systems, multi-dimensional signals and systems, analog filters and signal processing, digital filters and signal processing, statistical signal processing, multimedia, computer aided design, graph theory, neural systems, communication circuits and systems, and VLSI signal processing.

    The Editorial Board is international, and papers are welcome from throughout the world. The journal is devoted primarily to research papers, but survey, expository, and tutorial papers are also published.

    Circuits, Systems, and Signal Processing (CSSP) is published twelve times annually.

    Bibliographic Data
    First published in 1981
    1 volume per year, 12 issues per volume
    Format: 15,5 x 23,5 cm
    ISSN 0278-081X (print)
    ISSN 1531-5878 (electronic)

    AMS Mathematical Citation Quotient (MCQ): 0.06 (2017)

  • Submit Online
  • Open Choice - Your Way to Open Access
  • Instructions for authors

    Instructions for authors


  • Call for Nominations (pdf, 82 kB)
  • Best Paper Awards for 2016 (pdf, 109 kB)...
  • Author Academy: Training for Authors
  • Copyright Information

    Copyright Information


    Copyright Information

    For Authors

    Submission of a manuscript implies: that the work described has not been published before (except in form of an abstract or as part of a published lecture, review or thesis); that it is not under consideration for publication elsewhere; that its publication has been approved by all co-authors, if any, as well as – tacitly or explicitly – by the responsible authorities at the institution where the work was carried out.

    Author warrants (i) that he/she is the sole owner or has been authorized by any additional copyright owner to assign the right, (ii) that the article does not infringe any third party rights and no license from or payments to a third party is required to publish the article and (iii) that the article has not been previously published or licensed. The author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. Transfer of copyright to Springer (respective to owner if other than Springer) becomes effective if and when a Copyright Transfer Statement is signed or transferred electronically by the corresponding author. After submission of the Copyright Transfer Statement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted by Springer.

    The copyright to this article, including any graphic elements therein (e.g. illustrations, charts, moving images), is assigned for good and valuable consideration to Springer effective if and when the article is accepted for publication and to the extent assignable if assignability is restricted for by applicable law or regulations (e.g. for U.S. government or crown employees).

    The copyright assignment includes without limitation the exclusive, assignable and sublicensable right, unlimited in time and territory, to reproduce, publish, distribute, transmit, make available and store the article, including abstracts thereof, in all forms of media of expression now known or developed in the future, including pre- and reprints, translations, photographic reproductions and microform. Springer may use the article in whole or in part in electronic form, such as use in databases or data networks for display, print or download to stationary or portable devices. This includes interactive and multimedia use and the right to alter the article to the extent necessary for such use.

    Authors may self-archive the Author's accepted manuscript of their articles on their own websites. Authors may also deposit this version of the article in any repository, provided it is only made publicly available 12 months after official publication or later. He/she may not use the publisher's version (the final article), which is posted on SpringerLink and other Springer websites, for the purpose of self-archiving or deposit. Furthermore, the Author may only post his/her version provided acknowledgement is given to the original source of publication and a link is inserted to the published article on Springer's website. The link must be accompanied by the following text: "The final publication is available at link.springer.com".

    Prior versions of the article published on non-commercial pre-print servers like arXiv.org can remain on these servers and/or can be updated with Author's accepted version. The final published version (in pdf or html/xml format) cannot be used for this purpose. Acknowledgement needs to be given to the final publication and a link must be inserted to the published article on Springer's website, accompanied by the text "The final publication is available at link.springer.com". Author retains the right to use his/her article for his/her further scientific career by including the final published journal article in other publications such as dissertations and postdoctoral qualifications provided acknowledgement is given to the original source of publication.

    Author is requested to use the appropriate DOI for the article. Articles disseminated via link.springer.com are indexed, abstracted and referenced by many abstracting and information services, bibliographic networks, subscription agencies, library networks, and consortia.

    For Readers

    While the advice and information in this journal is believed to be true and accurate at the date of its publication, neither the authors, the editors, nor the publisher can accept any legal responsibility for any errors or omissions that may have been made. The publisher makes no warranty, express or implied, with respect to the material contained herein.

    All articles published in this journal are protected by copyright, which covers the exclusive rights to reproduce and distribute the article (e.g., as offprints), as well as all translation rights. No material published in this journal may be reproduced photographically or stored on microfilm, in electronic data bases, video disks, etc., without first obtaining written permission from the publisher (respective the copyright owner if other than Springer). The use of general descriptive names, trade names, trademarks, etc., in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.

    Springer has partnered with Copyright Clearance Center's RightsLink service to offer a variety of options for reusing Springer content. For permission to reuse our content please locate the material that you wish to use on link.springer.com or on springerimages.com and click on the permissions link or go to copyright.com, then enter the title of the publication that you wish to use. For assistance in placing a permission request, Copyright Clearance Center can be connected directly via phone: +1-855-239-3415, fax: +1-978-646-8600, or e-mail: info@copyright.com.

    © Springer Science+Business Media New York

Services for the Journal

Additional information