Logo - springer
Slogan - springer

Engineering - Control Engineering | International Journal of Control, Automation and Systems (Editorial Board)

International Journal of Control, Automation and Systems

International Journal of Control, Automation and Systems

Editor-in-Chief: Keum-Shik Hong

ISSN: 1598-6446 (print version)
ISSN: 2005-4092 (electronic version)

Journal no. 12555

EDITOR-IN-CHIEF

Professor Keum-Shik Hong
School of Mechanical Engineering
Pusan National University
Pusan 46241, Korea
E-mail: kshong@pusan.ac.kr
Lab website: http://cogno.pusan.ac.kr  


EDITORS
Professor Hamid Reza Karimi
Department of Mechanical Engineering
Politecnico di Milano
Milan 20156, Italy
E-mail: Hamidreza.karimi@polimi.it 

Professor Euntai Kim
School of Electrical and Electronic Engineering
Yonsei University
Seoul 03722, Korea
E-mail: etkim@yonsei.ac.kr

Professor Young IL Lee
Dept. of Electrical and Information Engineering
Seoul National University of Science and Technology
Seoul 02504, Korea
E-mail: yilee@seoultech.ac.kr

Professor Myotaeg Lim
School of Electrical Engineering
Korea University
Seoul 02841, Korea
E-mail: mlim@korea.ac.kr

Professor Yoshito Ohta
Department of Applied Mathematics & Physics
Kyoto University
Kyoto 606-8501, Japan
E-mail: yoshito_ohta@i.kyoto-u.ac.jp

Professor Ju Hyun Park
Department of Electrical Engineering
Yeungnam University
Kyongsan 38541, Korea
E-mail: jessie@ynu.ac.kr

Professor PooGyeon Park
Department of Electronic and Electrical Engineering
POSTECH
Pohang 37673, Korea
E-mail: ppg@postech.ac.kr

Professor Fuchun Sun
Department of Computer Science and Technology
Tsinghua University
Beijing 100084, P. R. China
E-mail: fcsun@tsinghua.edu.cn

Professor Hyun-Seok Yang
School of Mechanical Engineering
Yonsei University
Seoul 03722, Korea
E-mail: hsyang@yonsei.ac.kr


EDITORIAL ADVISORY BOARD

Mituhiko Araki, Kyoto University, Kyoto, Japan

Tamer Basar, Univ. of Illinois at Urbana-Champaign, U.S.A.

Bor-Sen Chen, National Tsing Hua University, Taiwan, R.O.C.

Hyungsuck Cho, KAIST, Daejeon, Korea

Michael J. Grimble, The University of Strathclyde, Glasgow, U.K.

Chang Chieh Hang, National Univ. of Singapore, Singapore

Masao Ikeda, Osaka University, Osaka, Japan

Rolf Isermann, Darmstadt University of Technology, Germany

Alberto Isidori, University of Rome "La Sapienza", Italy

Hidenori Kimura, RIKEN, Nagoya, Japan

Wook Hyun Kwon, Seoul National University, Seoul, Korea

Arthur C. Sanderson, Rensselaer Polytechnic Institute, U.S.A.

Masayoshi Tomizuka, University of California at Berkeley, U.S.A.


ASSOCIATE EDITORS

Choon Ki Ahn, Korea University, Seoul, Korea

Hyo-Sung Ahn, GIST, Gwangju, Korea

Juhoon Back, Kwangwoon University, Seoul, Korea

Pinhas Ben-Tzvi, George Washington University, Washington, USA

Mohammed Chadli, Univ. of Picardie Jules Verne, Amiens, France

Kyu-Jin Cho, Seoul National University, Seoul, Korea

Myung Geun Chun, Chungbuk National University, Chungbuk, Korea

Andrea Cristofaro, University of Camerino, Camerino, Italy

Jiuxiang Dong, Northeastern University, Liaoning, China

Soohee Han, POSTECH, Pohang, Korea

Changchun Hua, Yanshan University, Qinhuangdao, China

Yingmin Jia, Beihang University, Beijing, China

Bin Jiang, NUAA, Nanjing, China

Kang-Hyun Jo, University of Ulsan, Ulsan, Korea

Nam H. Jo, Soongsil University, Seoul, Korea

Dong-Joong Kang, Pusan National University, Busan, Korea

DaeEun Kim, Yonsei University, Seoul, Korea

Do Wan Kim, Hanbat National University, Daejeon, Korea

Gon-Woo Kim, Chungbuk National University, Chungbuk, Korea

H. Jin Kim, Seoul National University, Seoul, Korea

Tae-Hyoung Kim, Chung-Ang University, Seoul, Korea

Won-jong Kim, Texas A&M University, College Station, TX, U.S.A.

Kyoungchul Kong, Sogang University, Seoul, Korea

Oh Min Kwon, Chungbuk National University, Cheongju, Korea

Ho Jae Lee, Inha University, Incheon, Korea

Hongbo Li, Tsinghua University, Beijing, China

Hongyi Li, Bohai University, Liaoning, China

Shihua Li, Southeast University, Nanjing, China

Yangmin Li, University of Macau, Macau, China

Huaping Liu, Tsinghua University, Beijing, China

Fumitoshi Matsuno, Kyoto University, Kyoto, Japan

Hyun Myung, KAIST, Daejeon, Korea

Sing Kiong Nguang, University of Auckland, Auckland, New Zealand

Yongping Pan, National University of Singapore, Singapore

Shinsuk Park, Korea University, Seoul, Korea

Sukho Park, DGIST, Daegu, Korea

Chang-Kyung Ryoo, Inha University, Incheon, Korea

Atsushi Satoh, Iwate University, Iwate, Japan

William Singhose, Georgia Institute of Tech., Atlanta, GA, U.S.A.

Metin Sitti, Carnegie Mellon University, Pittsburgh, PA, U.S.A.

Young Ik Son, Myongji University, Kyunggi, Korea

Xiaojie Su, Chongqing University, Chongqing, China

Young Soo Suh, University of Ulsan, Ulsan, Korea

Sangkyung Sung, Konkuk University, Seoul, Kore

Yang Tang, East China Univ. of Sci. and Tech., Shanghai, China

Huanqing Wang, Carleton University, Ottawa, Canada

Guang-Hong Yang, Northeastern University, Liaoning, China

Bin Yao, Purdue University, West-Lafayette, IN, U.S.A.

Sooyeong Yi, Seoul National Univ. of Sci. and Tech., Seoul, Korea

Jun Yoneyama, Aoyama Gakuin University, Kanagawa, Japan

Sung Jin Yoo, Chung-Ang University, Seoul, Korea

Read this Journal on Springerlink

For authors and editors


  • Journal Citation Reports®
    2017 Impact Factor
  • 2.173
  • Aims and Scope

    Aims and Scope

    Close

    International Journal of Control, Automation and Systems is a joint publication of the Institute of Control, Robotics and Systems (ICROS) and the Korean Institute of Electrical Engineers (KIEE).

    The journal covers three closly-related research areas including control, automation, and systems.

    The technical areas include

    • Control Theory
    • Control Applications
    • Robotics and Automation
    • Intelligent and Information Systems

    The Journal addresses research areas focused on control, automation, and systems in electrical, mechanical, aerospace, chemical, and industrial engineering in order to create a strong synergy effect throughout the interdisciplinary research areas.

  • Submit Online
  • Call for Papers - Special issue on Robot...
  • Instructions for Authors
  • English Language Editing

    English Language Editing

    Close

  • Author Academy: Training for Authors
  • Copyright Information

    Copyright Information

    Close

    Copyright Information

    For Authors

    Submission of a manuscript implies: that the work described has not been published before (except in form of an abstract or as part of a published lecture, review or thesis); that it is not under consideration for publication elsewhere; that its publication has been approved by all co-authors, if any, as well as – tacitly or explicitly – by the responsible authorities at the institution where the work was carried out.

    Author warrants (i) that he/she is the sole owner or has been authorized by any additional copyright owner to assign the right, (ii) that the article does not infringe any third party rights and no license from or payments to a third party is required to publish the article and (iii) that the article has not been previously published or licensed. The author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. Transfer of copyright to Springer (respective to owner if other than Springer) becomes effective if and when a Copyright Transfer Statement is signed or transferred electronically by the corresponding author. After submission of the Copyright Transfer Statement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted by Springer.

    The copyright to this article, including any graphic elements therein (e.g. illustrations, charts, moving images), is assigned for good and valuable consideration to Springer effective if and when the article is accepted for publication and to the extent assignable if assignability is restricted for by applicable law or regulations (e.g. for U.S. government or crown employees).

    The copyright assignment includes without limitation the exclusive, assignable and sublicensable right, unlimited in time and territory, to reproduce, publish, distribute, transmit, make available and store the article, including abstracts thereof, in all forms of media of expression now known or developed in the future, including pre- and reprints, translations, photographic reproductions and microform. Springer may use the article in whole or in part in electronic form, such as use in databases or data networks for display, print or download to stationary or portable devices. This includes interactive and multimedia use and the right to alter the article to the extent necessary for such use.

    Authors may self-archive the Author's accepted manuscript of their articles on their own websites. Authors may also deposit this version of the article in any repository, provided it is only made publicly available 12 months after official publication or later. He/she may not use the publisher's version (the final article), which is posted on SpringerLink and other Springer websites, for the purpose of self-archiving or deposit. Furthermore, the Author may only post his/her version provided acknowledgement is given to the original source of publication and a link is inserted to the published article on Springer's website. The link must be accompanied by the following text: "The final publication is available at link.springer.com".

    Prior versions of the article published on non-commercial pre-print servers like arXiv.org can remain on these servers and/or can be updated with Author's accepted version. The final published version (in pdf or html/xml format) cannot be used for this purpose. Acknowledgement needs to be given to the final publication and a link must be inserted to the published article on Springer's website, accompanied by the text "The final publication is available at link.springer.com". Author retains the right to use his/her article for his/her further scientific career by including the final published journal article in other publications such as dissertations and postdoctoral qualifications provided acknowledgement is given to the original source of publication.

    Author is requested to use the appropriate DOI for the article. Articles disseminated via link.springer.com are indexed, abstracted and referenced by many abstracting and information services, bibliographic networks, subscription agencies, library networks, and consortia.

    For Readers

    While the advice and information in this journal is believed to be true and accurate at the date of its publication, neither the authors, the editors, nor the publisher can accept any legal responsibility for any errors or omissions that may have been made. The publisher makes no warranty, express or implied, with respect to the material contained herein.

    All articles published in this journal are protected by copyright, which covers the exclusive rights to reproduce and distribute the article (e.g., as offprints), as well as all translation rights. No material published in this journal may be reproduced photographically or stored on microfilm, in electronic data bases, video disks, etc., without first obtaining written permission from the publisher (respective the copyright owner if other than Springer). The use of general descriptive names, trade names, trademarks, etc., in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.

    Springer has partnered with Copyright Clearance Center's RightsLink service to offer a variety of options for reusing Springer content. For permission to reuse our content please locate the material that you wish to use on link.springer.com or on springerimages.com and click on the permissions link or go to copyright.com, then enter the title of the publication that you wish to use. For assistance in placing a permission request, Copyright Clearance Center can be connected directly via phone: +1-855-239-3415, fax: +1-978-646-8600, or e-mail: info@copyright.com.


    © Institute of Control, Robotics and Systems and The Korean Institute of Electrical Engineers and Springer-Verlag Berlin Heidelberg

Alerts for this journal

 

Get the table of contents of every new issue published in International Journal of Control, Automation and Systems.


Additional information