Logo - springer
Slogan - springer

Business & Management - Operations Research & Decision Theory | Journal of Intelligent Manufacturing - incl. option to publish open access (Editorial Board)

Journal of Intelligent Manufacturing

Journal of Intelligent Manufacturing

Editor-in-Chief: Andrew Kusiak

ISSN: 0956-5515 (print version)
ISSN: 1572-8145 (electronic version)

Journal no. 10845

$99.00 Personal Rate e-only for the Americas
Get Subscription

Online subscription, valid from January through December of current calendar year

Immediate access to this year's issues via SpringerLink

1 Volume(-s) with 8 issue(-s) per annual subscription

Automatic annual renewal

More information: >> FAQs // >> Policy

Editor-in-Chief:

Andrew Kusiak
MIE Department, The University of Iowa, Iowa City, USA

Regional Associate Editors:

Manoj Kumar Tiwari (Asia)
Indian Institute of Technology, Kharagpur, India

Lihui Wang (Europe)
KTH Royal Institute of Technology, Stockholm, Sweden

Associate Editors:

Radu F. Babiceanu, Embry-Riddle Aeronautical University, Daytona Beach, FL, USA

Eric Bonjour, Lorraine University, ENSGSI / ERPI, Nancy, France

Sergio Cavalieri, University of Bergamo, Italy

Mistsuo Gen, Fuzzy Logistic Systems Institute and Tokyo University of Science, Tokyo, Japan

Ernesto D.R. Santibanez Gonzalez, Federal University of Ouro Preto, Ouro Preto, Brazil

David He, Dept. of Mechanical & Industrial Engineering, University of Illinois at Chicago, Chicago, IL, USA

Hesuan Hu, School of Electro-mechanical Engineering, Xidian University, Xi'an, P. R. of China

George Q. Huang, Dept. of Industrial & Mfg. Systems Engineering, The University of Hong Kong, Hong Kong, SAR

Roger Jiao, George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA, USA

Hervé Panetto, Research Centre for Automatic Control (CRAN UMR CNRS 7039), University of Lorraine, Vandoeuvre-les-Nancy, France

Eugene Pei, Department of Design, Brunel University, London, UK

R. Venkata Rao, Department of Mechanical Engineering, Sardar Vallabhbhai National Institute of Technology (SV NIT), Ichchanath, Gujarat State, India

Xun W. Xu, Dept. of Mechanical Engineering, University of Auckland, Auckland, New Zealand

Ali Riza Yildiz, University of Michigan, Ann Arbor, MI, USA

Wen-Jun (Chris) Zhang, The University of Saskatchewan, Saskatoon, SK, Canada

Zijun Zhang, Dept. of Systems Engineering and Engineering Management, City University of Hong Kong, Hong Kong, SAR

Former Associate Editors:

Zeki Ayag, Dept. of Industrial Engineering, Kadir Has University - Cibali Campus, Istanbul, Turkey

Chen-Fu Chien, Department of Industrial Engineering & Engineering Management, National Tsing Hua University Taiwan, Hsinchu, Taiwan

Rajiv Khosla, School of Business, La Trobe University, Melbourne, Bundoora, Australia

Gérard Morel, CRAN CNRS UMR 7039, Université Henri Poincaré, Nancy I, Vandoeuvre-les-Nancy, France

International Editorial Board:

J. Browne, Galway, Ireland; G. Bruno, Turin, Italy; F. Chan, Hung Hom,Hong Kong; C.H. Dagli, Rolla, MO, USA; D. Dubois, Toulouse, France; Y. Furukawa, Tokyo, Japan; L.A. Gerhardt, New York, USA; J.P. Haton, Vandoeuvre-les-Nancy, France; I.G. Hommel, Berlin, Germany; M.N. Huhns, Columbia, SC, USA; L.D. Iterrante, Albuquerque, NM, USA; S.Joshi, University Park, PA, USA; B. Katalinic, Vienna, Austria; J. Kowalik, Seatle, WA, USA; J.C. Latombe, Stanford, CA, USA; S.C.-Y Lu, Los Angeles, CA, USA; T.J. Martin, Cambridge, MA, USA; K. Niwa, Tokyo, Japan; W. Pedrycz, Edmonton, Canada; J.M. Proth, Vandoeuvre-les-Nancy, France; J.L. Rose, Philadelphia, PA, USA; J. Szpytko, Krakow, Poland; W. Seering, Cambridge, MA, USA; A. Seidmann, Rochester, NY, USA; E. Simoudis, Palo Alto, CA, USA; A. Steiger-Garcao, Quinta de Torre, Portugal; N.P. Suh, Cambridge, MA, USA; M. Tseng, Hong Kong; T. Watanabe, Kyoto, Japan; D.J. Williams, Loughborough, UK; B. Wu, London, UK; Dazhong Wu, Orlando, FL, USAK. Yamaya, Tokyo, Japan; E.J. Zak, Redmond, WA, USA

Read this Journal on Springerlink

For authors and editors


  • Journal Citation Reports®
    2016 Impact Factor
  • 3.035
  • Aims and Scope

    Aims and Scope

    Close

    Issued bimonthly, Journal of Intelligent Manufacturing provides a unique international forum for developers of intelligent manufacturing systems. By publishing quality refereed papers on the applications of artificial intelligence in manufacturing, the Journal provides a vital link between the research community and practitioners in industry.

    In addition to research papers, Journal of Intelligent Manufacturing presents: * Articles on new methodologies and developments * Case studies * Surveys * Tutorials on topics related to product design and manufacturing * Special issues.

    Officially cited as: J Intell Manuf
  • Submit Online
  • Open Choice - Your Way to Open Access
  • Instructions for Authors

    Instructions for Authors

    Close

  • Call for Papers – Inclusive Manufacturin...
  • Author Academy: Training for Authors
  • Copyright Information

    Copyright Information

    Close

    Copyright Information

    For Authors

    Submission of a manuscript implies: that the work described has not been published before (except in form of an abstract or as part of a published lecture, review or thesis); that it is not under consideration for publication elsewhere; that its publication has been approved by all co-authors, if any, as well as – tacitly or explicitly – by the responsible authorities at the institution where the work was carried out.

    Author warrants (i) that he/she is the sole owner or has been authorized by any additional copyright owner to assign the right, (ii) that the article does not infringe any third party rights and no license from or payments to a third party is required to publish the article and (iii) that the article has not been previously published or licensed. The author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. Transfer of copyright to Springer (respective to owner if other than Springer) becomes effective if and when a Copyright Transfer Statement is signed or transferred electronically by the corresponding author. After submission of the Copyright Transfer Statement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted by Springer.

    The copyright to this article, including any graphic elements therein (e.g. illustrations, charts, moving images), is assigned for good and valuable consideration to Springer effective if and when the article is accepted for publication and to the extent assignable if assignability is restricted for by applicable law or regulations (e.g. for U.S. government or crown employees).

    The copyright assignment includes without limitation the exclusive, assignable and sublicensable right, unlimited in time and territory, to reproduce, publish, distribute, transmit, make available and store the article, including abstracts thereof, in all forms of media of expression now known or developed in the future, including pre- and reprints, translations, photographic reproductions and microform. Springer may use the article in whole or in part in electronic form, such as use in databases or data networks for display, print or download to stationary or portable devices. This includes interactive and multimedia use and the right to alter the article to the extent necessary for such use.

    Authors may self-archive the Author's accepted manuscript of their articles on their own websites. Authors may also deposit this version of the article in any repository, provided it is only made publicly available 12 months after official publication or later. He/she may not use the publisher's version (the final article), which is posted on SpringerLink and other Springer websites, for the purpose of self-archiving or deposit. Furthermore, the Author may only post his/her version provided acknowledgement is given to the original source of publication and a link is inserted to the published article on Springer's website. The link must be accompanied by the following text: "The final publication is available at link.springer.com".

    Prior versions of the article published on non-commercial pre-print servers like arXiv.org can remain on these servers and/or can be updated with Author's accepted version. The final published version (in pdf or html/xml format) cannot be used for this purpose. Acknowledgement needs to be given to the final publication and a link must be inserted to the published article on Springer's website, accompanied by the text "The final publication is available at link.springer.com". Author retains the right to use his/her article for his/her further scientific career by including the final published journal article in other publications such as dissertations and postdoctoral qualifications provided acknowledgement is given to the original source of publication.

    Author is requested to use the appropriate DOI for the article. Articles disseminated via link.springer.com are indexed, abstracted and referenced by many abstracting and information services, bibliographic networks, subscription agencies, library networks, and consortia.

    For Readers

    While the advice and information in this journal is believed to be true and accurate at the date of its publication, neither the authors, the editors, nor the publisher can accept any legal responsibility for any errors or omissions that may have been made. The publisher makes no warranty, express or implied, with respect to the material contained herein.

    All articles published in this journal are protected by copyright, which covers the exclusive rights to reproduce and distribute the article (e.g., as offprints), as well as all translation rights. No material published in this journal may be reproduced photographically or stored on microfilm, in electronic data bases, video disks, etc., without first obtaining written permission from the publisher (respective the copyright owner if other than Springer). The use of general descriptive names, trade names, trademarks, etc., in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.

    Springer has partnered with Copyright Clearance Center's RightsLink service to offer a variety of options for reusing Springer content. For permission to reuse our content please locate the material that you wish to use on link.springer.com or on springerimages.com and click on the permissions link or go to copyright.com, then enter the title of the publication that you wish to use. For assistance in placing a permission request, Copyright Clearance Center can be connected directly via phone: +1-855-239-3415, fax: +1-978-646-8600, or e-mail: info@copyright.com.


    © Springer Science+Business Media New York