Proceedings of the 17th International Conference on New Trends in Fatigue and Fracture

1. Front Matter

   Pages i-viii

   PDF

2. Theoretical and Experimental Analysis of the Energy Dissipation at Fatigue Crack Tip Under Cyclic Loading with Constant Stress Intensity Factor

   • O. Plekhov, A. Vshivkov, A. Iziumova

   Pages 1-6

3. A Study of Progressive Milling Technology on Surface Topography and Fatigue Properties of the High Strength Aluminum Alloy 7475-T7351

   • Miroslav Piska, Petra Ohnistova, Jana Hornikova, Charles Hervoches

   Pages 7-17

4. Study and Design of a New Range of Composite Based Shock Absorbers for the Automotive Sector

   • J. Niez, M. Ben Amara, J. Capelle, V. Bouchart, P. Chevrier

   Pages 19-27

5. A New High-Cycle Fatigue Criterion Based on a Self-consistent Scheme for Hard Metals Under Non-proportional Loading

   • Kékéli Amouzou, Eric Charkaluk

   Pages 29-39

6. Characterization and Evaluation of a Railway Wheel Steel in the HCF and VHCF Regimes

   • Henrique Soares, Pedro Costa, Mário Vieira, Manuel Freitas, Luís Reis

   Pages 41-47

7. High-Temperature Low Cycle Fatigue Resistance of Inconel 713LC Coated with Novel Thermal Barrier Coating

   • Ivo Šulák, Karel Obrtlík, Ladislav Čelko, David Jech, Pavel Gejdoš

   Pages 49-56

8. The Effect of Pearlite Banding on the Mechanical Anisotropy of Low Carbon Steel

   • M. Beltrán, J. L. González, D. I. Rivas, Felipe Hernández, Héctor Dorantes

   Pages 57-65

9. Analysis of Mechanical Behavior of the Underlying Soft Tissue to Ischial Tuberosities Using Finite Element Method

   • Diana Alicia Gayol-Mérida, Víctor Manuel Araujo-Monsalvo, José de Jesús Silva-Lomelí, Víctor Manuel Domínguez-Hernández, Marcos Martínez-Cruz, Elisa Martínez-Coría et al.

   Pages 67-73

10. Study of the Endurance Limit of AA7075 Aluminum Produced by High-Pressure Vacuum Die Casting Analyzed by Classical Whöler Curve

    • David Levasseur, Jimmy Simard, Francis Breton, Lotfi Toubal

    Pages 75-84

11. Life Prediction of a Mono Contact Aluminum/Steel at Constant and Variable Amplitudes Loading in Fretting Fatigue Configuration

    • A. Belloula, A. Amrouche, M. Nait-Abdelaziz

    Pages 85-90

12. Influence of Microstructure on Fatigue Crack Formation and Growth in a Low-Carbon Steel

    • Donka Angelova, Rozina Yordanova, Svetla Yankova

    Pages 91-99

13. Determination of the Region of Stabilization of Low-Cycle Fatigue HSLE Steel from Test Data

    • Bojana Aleksić, Vujadin Aleksić, Abubakr Hemer, Ljubica Milović, Aleksandar Grbović

    Pages 101-112

14. Study of a Stud Bolt Wrench Failure Due to an Inadequate Heat Treatment

    • Sandra L. Rodriguez-Reyna, Francisco G. Perez-Gutierrez, J. Luis Hernández-Rivera, Jorge Zaragoza-Siqueiros, Christian J. Garcia-Lopez

    Pages 113-121

15. Multiaxial Fatigue of Rubbers: Comparative Study Between Predictive Tools

    • G. Ayoub, M. Naït Abdelaziz, F. Zaïri

    Pages 123-128

16. Laboratory Study of Fatigue in Water Conveying HDPE and PVC Pipes Subject to Extreme Hydraulic Transient Pressures

    • René Autrique Ruiz, Eduardo Antonio Rodal Canales

    Pages 129-138

17. Probabilistic Assessment of Nuclear Piping Integrity by Considering Environmental Fatigue and Stress Corrosion Cracking

    • Seung Hyun Kim, Md Nasimul Goni, Yoon-Suk Chang

    Pages 139-146

18. The Inspections, Standards and Repairing Methods for Pipeline with Composite: A Review and Case Study

    • M. Hadj Meliani, O. Bouledroua, Z. Azari, A. Sorour, N. Merah, G. Pluvinage

    Pages 147-156

19. Effect of Microstructure on Tension, Charpy and DWTT Properties on Two API X70 Plates

    • Fernando Guzmán, Moisés Hinojosa, Eduardo Frias

    Pages 157-164

20. Fatigue Analysis in a Bellow Expansion Joint Installed a Heat Exchanger

    • I. Villagómez, J. L. González, J. J. Trujillo, D. Rivas

    Pages 165-171

This book presents the proceedings of one of the major conferences in fatigue, fracture and structural integrity (NT2F). The papers are organized and divided in five different themes: fatigue and fracture mechanics of structures and advanced materials; fatigue and fracture in pressure vessels and pipelines: mechanical behavior and structural integrity of welded, bonded and bolted joints; residual stress and environmental effects on the fatigue behavior; and simulation methods, analytical and computation models in fatigue and fracture.

• fracture mechanics
• component failure
• mechanical integrity
• finite element analysis
• pressure vessels
• fatigue behavior
• residual stress

• CIITEC-Instituto Politécnico Nacional, Mexico City, Mexico

  Ricardo R. Ambriz, David Jaramillo, Gabriel Plascencia

• Polytech’ Lille, Université des Sciences et Technologies de Lille , Villeneuve-d’Ascq, France

  Moussa Nait Abdelaziz

Gabriel Plascencia has a Ph. D. degree from the Department of Materials Science & Engineering, University of Toronto, Canada. The same year, he joined the faculty of graduate studies at the Center for Research and Technical Innovation of the National Polytechnic Institute in Mexico City.  

David Jaramillo Vigueras is a metallurgical engineer from the National Polytechnic Institute (IPN) in Mexico. He has been a professor at the IPN since 1976 at the undergraduate and graduate levels, being also appointed Dean of Research, and Dean of Undergraduate studies at IPN. He has vast experience on industrial consulting in mechanical metallurgy, mechanical integrity and heat treatment of alloys. 

Ricardo Rafael Ambriz Rojas is a Professor at the Centro de Investigación e Innovación Tecnológica of Instituto Politécnico Nacional in Mexico. His expertise areas are welding of aluminum alloys, as well as fatigue and fracture behavior of welded joints. 

Moussa Naït Abdelaziz is a Full Professor at Lille University of Science and Technology. His area of research deals with experimental and numerical modeling of damage, fracture and fatigue of materials, especially focusing on polymers.

Policies and ethics