Advances in Acoustics and Vibration

1. Front Matter

   Pages i-ix

   PDF

2. Fault Diagnosis in Gas Turbine Based on Neural Networks: Vibrations Speed Application

   • Mohamed Ben Rahmoune, Ahmed Hafaifa, Mouloud Guemana

   Pages 1-11

3. Early Detection of Gear Faults in Variable Load and Local Defect Size Using Ensemble Empirical Mode Decomposition (EEMD)

   • H. Mahgoun, Fakher Chaari, A. Felkaoui, Mohamed Haddar

   Pages 13-22

4. Design of Shunted Piezoelectric Patches Using Topology Optimization for Noise and Vibration Attenuation

   • Walid Larbi, Jean-François Deü, Luciano Pereira da Silva

   Pages 23-33

5. Prediction of Sound Radiation from Submerged Cylindrical Shell Structure with an Interpolation Method for the Measured Surface Velocity

   • Yilin Zhang, Haijun Wu, Weikang Jiang

   Pages 35-41

6. Identification of Small Objects with Near-Field Data in Quasi-Backscattering Configurations

   • Houssem Haddar, Mohamed Lakhal

   Pages 43-54

7. Characterization of Sandwich Beams with Shear Damage by Linear Vibration Method

   • I. Ben Ammar, C. Karra, A. El Mahi, R. El Guerjouma, Mohamed Haddar

   Pages 55-63

8. Parameter Identification of a Sandwich Beam Using Numerical-Based Inhomogeneous Wave Correlation Method

   • R. Ajili, O. Bareille, M.-L. Bouazizi, M.-N. Ichchou, N. Bouhaddi

   Pages 65-75

9. Time Domain Stability Analysis for Machining Processes

   • Asia Maamar, Belhassen Chedli Bouzgarrou, Vincent Gagnol, Raouf Fathallah

   Pages 77-88

10. Modeling and Control for Lateral Rail Vehicle Dynamic Vibration with Comfort Evaluation

    • Mortadha Graa, Mohamed Nejlaoui, Ajmi Houidi, Zouhaier Affi, Lotfi Romdhane

    Pages 89-100

11. Vibration Detection in Gas Turbine Rotor Using Artificial Neural Network Combined with Continuous Wavelet

    • Benrabeh Djaidir, Ahmed Hafaifa, Abdallaha Kouzou

    Pages 101-113

12. A Finite Element Model for Elastic-Viscoelastic-Elastic Composite Structures

    • Zhicheng Huang, Zhaoye Qin, Fulei Chu

    Pages 115-124

13. Application of the Operational Modal Analysis Using the Independent Component Analysis for a Quarter Car Vehicle Model

    • Dorra Ben Hassen, Mariem Miladi, Mohamed Slim Abbes, S. Caglar Baslamisli, Fakher Chaari, Mohamed Haddar

    Pages 125-133

14. Feature Extraction Using S-Transform and 2DNMF for Diesel Engine Faults Classification

    • Ezzeddine Ftoutou, Mnaouar Chouchane

    Pages 135-144

15. Experimental Study of Combined Gear and Bearing Faults by Sound Perception

    • Ramdane Younes, Nouredine Ouelaa, Nacer Hamzaoui, Abderrazek Djebala

    Pages 145-151

16. Modal Analysis of Spur Gearbox with an Elastic Coupling

    • Atef Hmida, Ahmed Hammami, Fakher Chaari, Mohamed Taoufik Khabou, Mohamed Haddar

    Pages 153-163

17. Planet Load Sharing Behavior During Run Up

    • Ahmed Hammami, Alfonso Fernandez Del Rincon, Fakher Chaari, Fernando Viadero Rueda, Mohamed Haddar

    Pages 165-173

18. Multi-objective Design Optimization of the NBTTL Mechanism

    • B. Najlawi, M. Nejlaoui, Z. Affi, L. Romdhane

    Pages 175-184

19. Appropriation Effects in the Estimation of Modal Damping

    • Mohamed Krifa, Noureddine Bouhaddi, Scott Cogan

    Pages 185-193

20. Simulation of Resonance Phenomenon in Pipelines Caused by Water Hammer

    • Noura Bettaieb, Ezzeddine Haj Taieb

    Pages 195-203

The book provides readers with a snapshot of recent research and industrial trends in field of industrial acoustics and vibration. Each chapter, accepted after a rigorous peer-review process, reports on a selected, original piece of work presented and discussed at International Conference on Acoustics and Vibration (ICAV2016), which was organized by the Tunisian Association of Industrial Acoustics and Vibration (ATAVI) and held March 21-23, in Hammamet, Tunisia. The contributions, mainly written by north African authors,  covers advances in both theory and practice in a variety of subfields, such as: smart materials and structures; fluid-structure interaction; structural acoustics as well as computational vibro-acoustics and numerical methods. Further topics include: engines control, noise identification, robust design, flow-induced vibration and many others.This book provides a valuable resource for both academics and professionals dealing with diverse issues in applied mechanics. By combining advanced theories with industrial issues, it is expected to facilitate communication and collaboration between different groups of researchers and technology users.

• Noise And Vibration Attenuation
• Vibration Monitoring
• Vibration Supervision
• Fault Diagnosis
• Stability Analysis
• Operational Modal Analysis
• Dynamic Vibration
• Finite Element Modeling Of Wear
• Modeling Resonance
• Empirical Mode Decomposition (EEMD)
• Rotating Machines
• Early Stage Fault Detection
• Topology Optimization
• Electromechanical Model
• MDO Problems
• Multi-Objective Robust Collaborative Optimization
• quality control, reliability, safety and risk

• National School of Engineers of Sfax , Sfax, Tunisia

  Tahar Fakhfakh

• BP 1173, Natl School of Engineers of Sfax BP 1173, Sfax, Tunisia

  Fakher Chaari

• BP 1173, National School of Engineers of Sfax BP 1173, Sfax, Tunisia

  Lasaad Walha

• Route MenzelChaker Km 0,5, Preparatory Engineering Inst of Sfax Route MenzelChaker Km 0,5, Sfax, Tunisia

  Moez Abdennadher

• BP 1173, Natl Sch of Engineers of Sfax BP 1173, Sfax, Tunisia

  Mohamed Slim Abbes

• National Sch Engineers of Sfax , Sfax, Tunisia

  Mohamed Haddar

Policies and ethics