Polymer Processing and Properties

1. Front Matter

   Pages i-xi

   PDF

2. Processing: Shaping Operations

   1. Front Matter

      Pages xiii-xiii

      PDF

   2. Current Trends in the Analysis of Polymer Shaping Operations

      • Musa R. Kamal, G. L. Bata

      Pages 1-45

   3. The Conductivity, Distribution in Injection Moulded LDPE and HDPE Containing Carbon Black

      • Carl Klason, Josef Kubàt

      Pages 47-52

   4. High Pressure Injection Moulding of Polyethylene

      • J. Kubát, J.-A. Månson, M. Rigdahl

      Pages 53-60

   5. Irradiation of High Density Polyethylene Filled With Colloidal Silica

      • G. Akay, F. Cimen, T. Tincer

      Pages 61-69

   6. The Role of Melt Rheology in Parison Formation

      • J. M. Dealy, N. Orbey

      Pages 71-78

   7. Melt Rheology and Processability of Polyethylenes

      • L. A. Utracki, A. M. Catani, J. Lara, M. R. Kamal

      Pages 79-88

   8. Void Formation in Extruded Bars

      • G. Titomanlio, S. Piccarolo, G. Marrucci

      Pages 89-96

   9. Utilization of Rheological Real Time and Sampling Measurements for Quality Control of Polymer Materials and Processes(Abstract)

      • J. M. Starita

      Pages 97-97

3. Processing: Operations other than Shaping

   1. Front Matter

      Pages 99-99

      PDF

   2. Polymer Processing Operations Other Than Shaping

      • Costel D. Denson

      Pages 101-113

   3. Mechanochemical Degradation of Glass Fibre Reinforced Polypropylene Melts During Flow

      • G. Akay, D. W. Saunders, T. Tincer, F. Cimen

      Pages 115-122

   4. Applications of a RIM Process Model

      • S. R. Estevez, J. M. Castro

      Pages 123-130

   5. Design Principles for Barrier-Screw Extruders (Abstract)

      • J. T. Lindt, B. Elbirli

      Pages 131-131

   6. Continuous Processing of Polymerizing Fluids IV: Continuous Mechanism in a Channel of a Screw-Extruder

      • J. T. Lindt, B. Elbirli

      Pages 133-141

   7. Processing of Thermosets

      • J. C. Halpin, A. Apicella, L. Nicolais

      Pages 143-152

   8. Adapting a Microprocessor System to Autoclave Processing

      • Robert E. Coulehan

      Pages 153-156

4. Relationships between Processing and Properties

   1. Front Matter

      Pages 157-157

      PDF

   2. Heat Transfer and Kinetics of Flow Induced Crystallization as Intertwined Problems in Polymer Melt Processing

      • H. Janeschitz-Kriegl, F. Kügler

      Pages 159-181

During the First Conference of European Rheologists, which was held in Graz, Austria, in April 1982, the Provisional Committee of European Delegates to the Inter­ national Committee on Rheology held a meeting to discuss future European activities in the general area of rheol­ ogy. It was agreed, among other things, that the organ­ ization of meetings in Europe on specific topics related to rheology would be done in cooperation, so as to avoid conflicts of dates and/or subject areas. Any such meeting, if approved by the Provisional Committee, would be named a European Meeting; the European Societies of Rheology would help the organizers with distribution 6f circulars, membership lists, and any required technical assistance. One of the very first meetings organized within this procedural scheme has been the European Meeting on Polymer Processing and Properties, which was held in Capri, Italy, on June 13-16, 1983. This book constitutes the Proceedings of that meeting.

• Copolymer
• Elastomer
• Extruder
• Polycarbonat
• Polyethylen
• Polypropylen
• Polyurethan
• colloid
• morphology
• plastics
• polymer
• quality control
• rheology
• thermoset

• University of Naples, Naples, Italy

  Gianni Astarita, Luigi Nicolais

Policies and ethics