Machining, Joining and Modifications of Advanced Materials

1. Front Matter

   Pages i-ix

   PDF

2. Experimental and Numerical Analysis of the Effect of Ribs and Beds in Sheet Metal Parts with 90° Bend

   • Alfonso Campos, Alejandro Escamilla, Orión Gutiérrez

   Pages 1-11

3. Effect of Boron Nitride Coating on Wear Behavior of Carbide Cutting Tools in Milling of Inconel 718

   • Halil Caliskan, Bilal Kursuncu, Sevki Yilmaz Guven, Abdullah Cahit Karaoglanli, Mustafa Sabri Gok, Akgun Alsaran

   Pages 13-21

4. Fused Deposition Modeling of PCL/HA/MMT Biocompatible Polymer Nano-composites

   • R. H. Abdul Haq, M. S. Wahab, M. U. Wahid

   Pages 23-32

5. Forming Temperature Investigation of Aluminum and Aluminum/Silicon Carbide Using Image Texture Features

   • Ahmad E. Eladawi, Tamer O. Diab, Hammad T. Elmetwally

   Pages 33-44

6. Application of Artificial Neural Network to Predict the Effects of Severe Shot Peening on Properties of Low Carbon Steel

   • Erfan Maleki, Gholam Hossein Farrahi, Khalil Sherafatnia

   Pages 45-60

7. The Influence of Two Different Casting Moulds on the Fatigue Properties of the Al–Si–Cu Cast Alloy

   • L. Hurtalová, E. Tillová, M. Chalupová, J. Belan, M. Uhríčik

   Pages 61-70

8. Mechanical Property Evaluation of Gas-Metal-Arc Welded SKD 61 Hot Work Tool Steel

   • S. Surapunt, T. Kanchanasangtong

   Pages 71-77

9. Investigation of Bond Strength of Spray Dried Hydroxyapatite-Wollastonite Composite Powder After Plasma Spray

   • F. E. Bastan, O. Karaarslan, G. Erdogan, F. Ustel

   Pages 79-86

10. The Hardness Variation Due to Secondary Heating in Friction Stir Welding of Small Diameter Aluminium Alloy 6063 Pipe

    • Azman Ismail, Mokhtar Awang, Shaiful Hisham Samsudin, Mohd Afendi Rojan, Muhammad Azrie Husainy Mohd Jasri

    Pages 87-94

11. The Material Hardness and Tensile Strength of AA5083 Aluminum Alloy Friction Stir Welding Lap Joint with Conventional Milling Machine

    • M. A. H. M. Jasri, M. Afendi Rojan, M. Azman

    Pages 95-103

12. Effect of Process Parameters on the Strength of Swept Friction Stir Spot Welded Plates

    • Mokhtar Awang, Azman Ismail, M. Aiman K. Zaman

    Pages 105-110

13. Mechanism of Creating the Topography of an Abrasive Water Jet Cut Surface

    • J. Valíček, M. Harničárová, A. Panda, I. Hlavatý, M. Kušnerová, H. Tozan et al.

    Pages 111-120

14. Injection Moulding Versus Rapid Prototyping—Thermal and Mechanical Properties

    • Pavel Koštial, Ivan Ružiak, Svetozár Malinarič, Zora Jančíková, Vladimír Rusnák

    Pages 121-127

15. Characteristics of Cobalt Chromium by Neodymium-doped Yttrium Aluminium Garnet; Nd:Y3Al5O12 (Nd:YAG) Laser Sintering Process

    • Khairu Kamarudin, Md. Saidin Wahab, Mohd. Hazelin Ramli

    Pages 129-139

16. Evaluation of Biomimetic Coatings on Femtosecond Laser Treated Alumina and Alumina-Zirconia Composite Surfaces

    • A. A. Aguiar, N. B. de Lima, F. J. C. Braga, W. Rossi, A. A. Couto, R. Baldan

    Pages 141-157

17. Laser Polishing of Additive Manufactured AlSi10Mg Parts with an Oscillating Laser Beam

    • Jochen Schanz, Markus Hofele, Leonhard Hitzler, Markus Merkel, Harald Riegel

    Pages 159-169

18. Laser Beam Machining, Laser Beam Hybrid Machining, and Micro-channels Applications and Fabrication Techniques

    • Saied Darwish, Naveed Ahmed, Abdulrahman M. Alahmari

    Pages 171-269

19. Erratum to: Laser Beam Machining, Laser Beam Hybrid Machining, and Micro-channels Applications and Fabrication Techniques

    • Saied Darwish, Naveed Ahmed, Abdulrahman M. Alahmari

    Pages E1-E1

20. Erratum to: Laser Polishing of Additive Manufactured AlSi10Mg Parts with an Oscillating Laser Beam

    • Jochen Schanz, Markus Hofele, Leonhard Hitzler, Markus Merkel, Harald Riegel

    Pages E3-E3

This book presents the latest advances in mechanical and materials engineering applied to the machining, joining and modification of modern engineering materials. The contributions cover the classical fields of casting, forming and injection moulding as representative manufacturing methods, whereas additive manufacturing methods (rapid prototyping and laser sintering) are treated as more innovative and recent technologies that are paving the way for the manufacturing of shapes and features that traditional methods are unable to deliver. The book also explores water jet cutting as an innovative cutting technology that avoids the heat build-up typical of classical mechanical cutting. It introduces readers to laser cutting as an alternative technology for the separation of materials, and to classical bonding and friction stir welding approaches in the context of joining technologies. In many cases, forming and machining technologies require additional post-treatment to achieve the required level of surface quality or to furnish a protective layer. Accordingly, sections on laser treatment, shot peening and the production of protective layers round out the book’s coverage.

• ACE-X
• Injection Moulding
• Additive Manufacturing
• Water jet Cutting
• Laser Cutting
• Friction Stir Welding

• Griffith School of Engineering, Griffith University, Southport, Australia

  Andreas Öchsner

• Institut für Mechanik, Otto-von-Guericke-Universität, Magdeburg, Germany

  Holm Altenbach

Andreas Öchsner is a Full Professor at the School of Engineering, Griffith University, Australia and Leader of the Mechanical Engineering Program (Head of Discipline and Program Director). Having obtained a Dipl.-Ing. degree in Aeronautical Engineering at the University of Stuttgart (1997), Germany, he served as a research and teaching assistant at the University of Erlangen-Nuremberg from 1997 to 2003 while working to complete his Doctor of Engineering Sciences (Dr.-Ing.) degree. From 2003 to 2006, he was an Assistant Professor at the Department of Mechanical Engineering and Head of the Cellular Metals Group affiliated with the University of Aveiro, Portugal. He spent seven years (2007–2013) as a Full Professor at the Department of Applied Mechanics, Technical University of Malaysia, where he was also Head of the Advanced Materials and Structure Lab.

Policies and ethics