Advances in Continuum Mechanics

1. Front Matter

   Pages I-XXII

   PDF

2. Fundamentals of Plasticity

   1. Front Matter

      Pages 1-1

      PDF

   2. Some Remarks on the Phenomenological Description of Anisotropic Behaviour of Elastic-Plastic Solids

      • Th. Lehmann

      Pages 3-25

   3. On the Choice of Integrity Base of Strain Invariants for Constitutive Equations of Isotropic Materials

      • H. Bednarczyk, C. Sansour

      Pages 26-33

   4. Modification of the Normality Rule

      • J. Betten

      Pages 34-45

   5. Plastic Behaviour of Saturated Porous Media

      • R. de Boer

      Pages 46-57

   6. Compressible Plastic Deformation of Porous Metals

      • H. Günther

      Pages 58-64

   7. Application of the Mathematical Theory of Plasticity for Developing New Methods of Material Testing

      • O. Pawelski, R. Hop, K. E. Hagedorn

      Pages 65-76

   8. Stochastic Models for the Plasticity of Metals

      • E. Steck

      Pages 77-87

   9. A Concept for Modelling and Computation of Finite Inelastic Deformations

      • E. Stein, N. Müller-Hoeppe

      Pages 88-99

3. Applied Plasticity

   1. Front Matter

      Pages 101-101

      PDF

   2. A Theoretical and Experimental Modelling of the Mechanics of Ductile Fracture in Metals

      • W. Szczepinski

      Pages 103-121

   3. A Numerical Cosserat-Approach Predicting the Statical Stability of a Plane Frictionless Block-Structure, and its Boundary Conditions

      • D. Besdo

      Pages 122-142

   4. Evolution of Anisotropy in Sheet-Steels Submitted to Off-Axes Large Deformations

      • J.-P. Boehler, S. Koss

      Pages 143-158

   5. On the Plane Strain Deformations of Critical State Models for Sands

      • I. F. Collins

      Pages 159-167

   6. On the Quasi-Analytical Solutions of Elastic-Plastic Problems with Nonlinear Hardening

      • V. Gamer

      Pages 168-177

   7. Some Mechanisms of a Granular Mass in a Silo — Model Tests and a Numerical Cosserat Approach

      • G. Gudehus, J. Tejchman

      Pages 178-193

   8. Experimental Investigation on Plastic Deformation of Stainless Steel at Low Temperature

      • K. Ikegami, Y. Niitsu

      Pages 194-201

   9. Upper Bound Approach for Prediction of Occurence of Ductile Fracture in Metal Forming

      • S. Shima, M. Oka

      Pages 202-212

4. Critical States, Failure and Fracture

   1. Front Matter

      Pages 213-213

      PDF

Recognized authors contributed to this collection of original papers from all fields of research in continuum mechanics. Special emphasis is given to time dependent and independent permanent deformations, damage and fracture. Part of the contributions is dedicated to current efforts in describing material behavior with regard to, e.g., anisotropy, thermal effects, softening, ductile and brittle fracture, porosity and granular structure. Another part deals with numerical aspects arising from the implementation of material laws in the calculations of forming processes, soil mechanics and structural mechanics. Applications of theory and numerical methods belong to the following areas: Comparison with experimental results from material testing, metal forming under thermal and dynamic conditions, failure by damage, fracture and localized deformation modes. The variety of treated topics provides a survery of the actual research in these fields; therefore, the book is addressed to those interested in special problems of continuum mechanics as well as to those interested in a general knowledge.

• Elastizität
• Festigkeit
• Kontinuumsmechanik
• Technische Mechanik
• damage
• fracture
• materials
• mechanics
• metal
• plasticity
• porous media
• stability
• stress
• structural mechanics
• thermomechanics

• Lehrstuhl A für Mechanik, Technische Universität München, München 2, Germany

  Otto S. Brüller, Volker Mannl, Jerzy Najar

Policies and ethics