Overview
- Covers the full range of high speed catamarans and multihull vehicles
- Includes theoretical and empirical analysis and calculations for sea-keeping quality of multihull craft
- Discusses the importance of design using a case study of the high speed catamaran as a case in point
- Previews experimental future vehicles including waterplane twin hull vessels, wave piercing catamarans, planing Catamarans, tunnel planing catamarans and other multihull vessels
Access this book
Tax calculation will be finalised at checkout
Other ways to access
Table of contents (14 chapters)
-
Front Matter
-
Back Matter
Keywords
About this book
Authors and Affiliations
About the authors
Liang Yun
Professor Yun has more than 40 years’ experience at the Marine Design & Research Institute of China, Shanghai (MARIC). He graduated from the Shipbuilding Engineering Faculty of Da-Lian Polytechnic University in 1953 and completed a postgraduate diploma at the Military Engineering Academy of China in 1955. He has been involved in ACV development in China since the very first prototypes were constructed in Harbin in the late 1950’s, has been involved in design and prototype construction of WIG craft in the 1990’s, and development of both high speed catamarans and air cavity vessels through the millennium.He was director of HPMV division, MARIC from 1983 to 1987 and Deputy Chief Naval Architect of MARIC from 1980 to 1997. He has been a Guest Professor supporting HPMV post graduate students in Harbin Engineering University, and Wu Han Water Transportation University in the early 1990’s.
Prof Yun has been Chairman of HPMV Design subcommittee of the China Society of Naval Architecture and Marine engineering, CSNAME over the last 20 years, as well as a vice chairman of the organizing committee of the annual International HPMV Conference, Shanghai, China since 1996.
He continues to play an active role in promotion and development of HPMV technology in China through his association with the industry and Chinese Universities.
Professor Yun has partnered with Alan Bliault on three textbooks covering ACV, WIG, and HPMV technology prior to the current volume on multihull vessels.
Alan Bliault​
A Naval Architect and Offshore Engineer, Alan is a Fellow of the Royal Institution of Naval Architects and graduated from the University of Newcastle upon Tyne. His initial career was at Vosper Thornycroft working with design and operation of hovercraft and air cushion platforms. Subsequently he worked in the offshore industry developing new offshore loading systems. He was responsible for hydrodynamic design for Conoco Hutton field Tension Leg Platform in the UK and subsequently at Norske Shell for Draugen Platform substructure mechanical outfitting, hydrodynamics, tow-out and installation in Haltenbanken.In the mid 1990’s he led development of new API and ISO standards for subsea flexible flowlines and risers based in Holland. Through the millennium he led Shell International’s development of the Floating LNG production system for remote gas fields. Since that time he has held various project management, construction, and R&D roles. He has worked as a senior auditor in Shell’s central Internal Audit group evaluating risk and management controls at major projects and operating companies worldwide from 2013 to 2016.
He has maintained a close interest in high speed marine craft throughout his career and this led to his partnership with Liang Yun on engineering text books including the present volume on Multihull Vessels.
Huan-Zong Rong
Huan-Zong also has over 40 years’ experience at the Marine Design & Research Institute of China, Shanghai (MARIC). He graduated from Department of Mathematics, Fudan University, majoring in Mechanics in 1967. As an engineer in the Ship Hydrodynamic Laboratory, MARIC, he worked on calculation of wave resistance and ship form improvement by using wave-making theory and wave pattern analysis.
In 1982 he received a postgraduate Diploma at China Ship Research and Development Academy, based on his work in marine hydrodynamics, and received an M.Sc. degree from Shanghai Jiao Tong University in 1983
He became Senior Engineer, Head of CAD, computer division, MARIC, working on Uniform B-spline curve fitting with an area constraint, non-uniform B-spline mesh fairing, and hull form generation system using non-uniform B-spline technique between 1088 and 1996.
Huan-Zong became Professor, Principal Engineer, and Consultant at the ship design technology national engineering centre, MARIC from 1997 to 2012 working on a computer based hull form generation and hull form design system using NURBS technique, a ship power estimation system, and a ship damage stability calculation system, all based on Windows.
Bibliographic Information
Book Title: High Speed Catamarans and Multihulls
Book Subtitle: Technology, Performance, and Applications
Authors: Liang Yun, Alan Bliault, Huan Zong Rong
DOI: https://doi.org/10.1007/978-1-4939-7891-5
Publisher: Springer New York, NY
eBook Packages: Engineering, Engineering (R0)
Copyright Information: Springer Science+Business Media, LLC, part of Springer Nature 2019
Hardcover ISBN: 978-1-4939-7889-2
Softcover ISBN: 978-1-4939-9316-1
eBook ISBN: 978-1-4939-7891-5
Edition Number: 1
Number of Pages: XLVII, 746
Number of Illustrations: 232 b/w illustrations, 163 illustrations in colour
Topics: Engineering Fluid Dynamics, Engineering Design, Thermodynamics