Logo - springer
Slogan - springer

Mathematics - Applications | Applied Mathematics and Mechanics (Editorial Board)

Applied Mathematics and Mechanics

Applied Mathematics and Mechanics

English Edition

Editor-in-Chief: Xingming Guo
Deputy Editor-in-Chief: P. Zhang; C.-Q. Ru; J.-z. Lin; L. Chen
Editorial Director: Haili Xu

ISSN: 0253-4827 (print version)
ISSN: 1573-2754 (electronic version)

Journal no. 10483

Advisory Board

Yushu CHEN, Department of Mechanics, Tianjin University, Tianjin, China

Gengdong CHENG, State Key Laboratory of Structural Analysis of Industrial Equipment, Dalian University of Technology, Dalian, China

Y. K. CHEUNG, Department of Civil Engineering, The University of Hongkong, Hongkong, China

K. P. CHONG, Department of Mechanical and Aerospace Engineering, The George Washington University, Washington, DC 20052, U.S.A.

Boling GUO, Institue of Applied Physics and Computational Mathematics, China Academy of Engineering Physics, Beijing, China

A.N.GUZ (A.H.Γyзъ), Institute of Mechanics, Academy of Sciences of Ukraine, Kiev, Ukraine

Yousheng HE, Department of Engineering Mechanics,Shanghai Jiao Tong University,Shanghai, China

R. K. T. HSIEH, Department of Mechanics, Royal Institute of Technology, S100 44 Stockholm, Sweden

Chiehsu HSU, University of California, Berkeley, CA, U.S.A

Wenrui HU, Institute of Mechanics, Chinese Academy of Sciences, Beijing, China

Jiachun LI, Department of Engineering Sciences, Institute of Mechanics, Chinese Academy of Sciences, Beijing, China

Renhuai LIU, Institute of Applied Mechanics, Jinan University, Guangzhou, China

Yuqiu LONG, Department of Civil Engineering, Tsinghua University, Beijing, China

Changyu SHEN, President office of Zhengzhou University, Zhengzhou, China

Theodore. Yaotsu WU, Engineering Science Department, California Institute of Technology Pasadena, California, U.S.A.

Hanxin ZHANG, China Aerodynamic Research & Development Center, Mianyang, Sichuan, China

Wanxie ZHONG, State Key Laboratory of Structural Analysis of Industrial Equipment, Dalian University of Technology, Dalian, China

Heng ZHOU, Department of Mechanics, Tianjin University, Tianjin, China

Zhewei ZHOU, Shanghai Institute of Applied Mathematics and Mechanics, Shanghai University, Shanghai, China

Honorary EditorinChief

Weizang CHIEN , Shanghai Institute of Applied Mathematics and Mechanics, Shanghai University, Shanghai, China

EditorinChief

Xingming GUO, Shanghai Institute of Applied Mathematics and Mechanics, Shanghai University, Shanghai, China

Vice EditorinChief

Pingwen ZHANG, School of Mathematical Sciences, Peking University, Beijing, China

C. Q. RU, Department of Mechanical Engineering, University of Alberta, Edmonton, Canada

Jianzhong LIN, Department of Mechanics, Zhejiang University, and Jiliang University, Hangzhou, China

Liqun CHEN, Shanghai Institute of Applied Mathematics and Mechanics, Shanghai University, Shanghai, China

 

 Editorial Board

W. Z. BAO, Department of Mathematics,National University of Singapore, Singapore

Weiqiu CHEN, Department of Engineering Mechanics, Zhejiang University, Hangzhou, China

Huiling DUAN, College of Engineering, Peking University, Beijing, China

Jing FAN, Institute of Mechanics, Chinese Academy of Sciences, Beijing, China

T. G. FANG, Department of Mechanical and Aerospace Engineering, North Carolina State University, U.S.A

Xiqiao FENG, School of aerospace,Tsinghua University, Beijing, China

Song FU, School of Aerospace, Tsinghua University, Beijing, China

Guowei HE, The State Key Laboratory of Nonlinear Mechanics, Chinese Academy of Sciences, Beijing, China

Linghui HE, Department of Modern Mechanics, University of Science and Technology of China, Hefei, China

Q. C. HE, Laboratoire de Modélisation et Simulation Multi Echelle (MSME),

Université ParisEst, France

Youshi HONG, State Key Laboratory of Nonlinear Mechanics, Institute of Mechanics, Chinese Academy of Sciences, Beijing, China

Gengkai HU, Department of Applied Mechanics, Beijing Institute of Technology, Beijing, China

Guohui HU, Shanghai Institute of Applied Mathematics and Mechanics, Shanghai University, Shanghai, China

Yongzhong HUO, Department of Mechanics and Engineering Science, Fudan University, Shanghai, China

G. E. KARNIADAKIS, Division of Applied Mathematics, Brown University, U.S.A.

Cunbiao LI, College of Engineering, Peking University, Beijing, China

F. Y. Li, Department of Mathematical Sciences, Rensselaer Polytechnic Institute, New York, U.S.A.

L. Y. LI, Department of Civil Engineering, University of Birmingham, Birmingham, UK

Yulu LIU, Shanghai Institute of Applied Mathematics and Mechanics, Shanghai University, Shanghai, China

Jisheng LUO, Department of Mechanics, Tianjin University, Tianjin, China

Qingguo MENG, Department of Mathematical and Physical Sciences, National Nature Science Foundation of China, Beijing, China

Huishen SHEN, Department of Engineering Mechanics,Shanghai Jiao Tong University, Shanghai

Wenchang TAN, Department of Mechanics and Aerospace Engineering, College of Engineering, Peking University

Biao WANG, School of Physics and Engineering, Sun YatSen University, Guangzhou, China

Q. Wang, Department of Mechanical and Manufacturing Engineering, University of Manitoba, Winnipeg, Canada

Tiejun WANG, Department of Engineering Mechanics, MOE Key Laboratory for Strength and Vibration, Xi’an Jiaotong University, Xi’an, China

Yuesheng WANG, School of Civil Engineering, Beijing Jiaotong University, Beijing, China

X. S. WU, School of Mechanical Engineering, Tianjin University, Tianjin, China,

                  Department of Mathematics, Imperial College of Science, Technology & Medicine, UK 

Heng XIAO, Shanghai Institute of Applied Mathematics and Mechanics, Shanghai University, Shanghai, China

Heping XIE, Institute of Engineering Science and Hazard Mechanics, Sichuan University, Chengdu, China

Hongwu ZHANG, Department of Engineering Mechanics, Dalian University of Technology, Dalian, China

Yapu ZHAO, State Key Laboratory of Nonlinear Mechanics, Institute of Mechanics, Chinese Academy of Sciences, Beijing, China

Quanshui ZHENG, School of Aerospace, Tsinghua University, Beijing, China

Xiaojing ZHENG, School of Civil Engineering and Mechanics, Lanzhou University, Lanzhou, China

Zheng ZHONG, School of Aerospace Engineering and Applied Mechanics, Tongji University, Shanghai, China

Youhe ZHOU, School of Civil Engineering and Mechanics, Lanzhou University, Lanzhou, China

J. W. ZU, Department of Mechanical & Industrial Engineering, University of Toronto, Toronto, ON, Canada

 

 

Articles

For authors and editors


  • Journal Citation Reports®, Thomson Reuters
    2013 Impact Factor
  • 0.802
  • Aims and Scope

    Aims and Scope

    Close

    Applied Mathematics and Mechanics is the English version of a journal on applied mathematics and mechanics published in the People's Republic of China. Our Editorial Committee, headed by Professor Chien Weizang, Ph.D., President of Shanghai University, consists of scientists in the fields of applied mathematics and mechanics from all over China.

    Founded by Professor Chien Weizang in 1980, Applied Mathematics and Mechanics became a bimonthly in 1981 and then a monthly in 1985. It is a comprehensive journal carrying original research papers on mechanics, mathematical methods in mechanics as well as applied mathematics relevant to neoteric mechanics.

     

    For manuscript submission:

    Editorial office of Applied Mathematics and Mechanics, 99 Shangda Road, Shanghai 200444, P.R. China, http://www.shangdapress.com

    e-mail:  amm@department.shu.edu.cn

     

     

  • Submit Online
  • Instructions for Authors (pdf, 44 kB)
  • Copyright Transfer Statement (pdf, 33 kB...
  • English Language Editing

    English Language Editing

    Close

  • Author Academy: Training for Authors
  • Copyright information

    Copyright information

    Close

    Copyright Information

    For Authors

    Submission of a manuscript implies: that the work described has not been published before (except in form of an abstract or as part of a published lecture, review or thesis); that it is not under consideration for publication elsewhere; that its publication has been approved by all co-authors, if any, as well as – tacitly or explicitly – by the responsible authorities at the institution where the work was carried out.

    Author warrants (i) that he/she is the sole owner or has been authorized by any additional copyright owner to assign the right, (ii) that the article does not infringe any third party rights and no license from or payments to a third party is required to publish the article and (iii) that the article has not been previously published or licensed. The author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. Transfer of copyright to Springer (respective to owner if other than Springer) becomes effective if and when a Copyright Transfer Statement is signed or transferred electronically by the corresponding author. After submission of the Copyright Transfer Statement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted by Springer.

    The copyright to this article, including any graphic elements therein (e.g. illustrations, charts, moving images), is assigned for good and valuable consideration to Springer effective if and when the article is accepted for publication and to the extent assignable if assignability is restricted for by applicable law or regulations (e.g. for U.S. government or crown employees).

    The copyright assignment includes without limitation the exclusive, assignable and sublicensable right, unlimited in time and territory, to reproduce, publish, distribute, transmit, make available and store the article, including abstracts thereof, in all forms of media of expression now known or developed in the future, including pre- and reprints, translations, photographic reproductions and microform. Springer may use the article in whole or in part in electronic form, such as use in databases or data networks for display, print or download to stationary or portable devices. This includes interactive and multimedia use and the right to alter the article to the extent necessary for such use.

    Authors may self-archive the Author's accepted manuscript of their articles on their own websites. Authors may also deposit this version of the article in any repository, provided it is only made publicly available 12 months after official publication or later. He/she may not use the publisher's version (the final article), which is posted on SpringerLink and other Springer websites, for the purpose of self-archiving or deposit. Furthermore, the Author may only post his/her version provided acknowledgement is given to the original source of publication and a link is inserted to the published article on Springer's website. The link must be accompanied by the following text: "The final publication is available at link.springer.com".

    Prior versions of the article published on non-commercial pre-print servers like arXiv.org can remain on these servers and/or can be updated with Author's accepted version. The final published version (in pdf or html/xml format) cannot be used for this purpose. Acknowledgement needs to be given to the final publication and a link must be inserted to the published article on Springer's website, accompanied by the text "The final publication is available at link.springer.com". Author retains the right to use his/her article for his/her further scientific career by including the final published journal article in other publications such as dissertations and postdoctoral qualifications provided acknowledgement is given to the original source of publication.

    Author is requested to use the appropriate DOI for the article. Articles disseminated via link.springer.com are indexed, abstracted and referenced by many abstracting and information services, bibliographic networks, subscription agencies, library networks, and consortia.

    For Readers

    While the advice and information in this journal is believed to be true and accurate at the date of its publication, neither the authors, the editors, nor the publisher can accept any legal responsibility for any errors or omissions that may have been made. The publisher makes no warranty, express or implied, with respect to the material contained herein.

    All articles published in this journal are protected by copyright, which covers the exclusive rights to reproduce and distribute the article (e.g., as offprints), as well as all translation rights. No material published in this journal may be reproduced photographically or stored on microfilm, in electronic data bases, video disks, etc., without first obtaining written permission from the publisher (respective the copyright owner if other than Springer). The use of general descriptive names, trade names, trademarks, etc., in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.

    Springer has partnered with Copyright Clearance Center's RightsLink service to offer a variety of options for reusing Springer content. For permission to reuse our content please locate the material that you wish to use on link.springer.com or on springerimages.com and click on the permissions link or go to copyright.com, then enter the title of the publication that you wish to use. For assistance in placing a permission request, Copyright Clearance Center can be connected directly via phone: +1-855-239-3415, fax: +1-978-646-8600, or e-mail: info@copyright.com.


    © Shanghai University and Springer-Verlag Berlin Heidelberg

Alerts for this journal

 

Get the table of contents of every new issue published in Applied Mathematics and Mechanics.


Additional information