1. Lithium: Sources, Production, Uses, and Recovery Outlook (this opens in a new tab) | Laura Talens Peiró, Gara Villalba Méndez, Robert U. Ayres |
2. Overview of Materials Qualification Needs for Metal Additive Manufacturing (this opens in a new tab) | Mohsen Seifi, Ayman Salem, Jack Beuth, Ola Harrysson, John J. Lewandowski |
3. Current and Prospective Li-Ion Battery Recycling and Recovery Processes (this opens in a new tab) | Joseph Heelan et al. |
4. The History and Future Challenges of Calcined Petroleum Coke Production and Use in Aluminum Smelting (this opens in a new tab) | Les Edwards |
5. Review of the Methods for Production of Spherical Ti and Ti Alloy Powder (this opens in a new tab) | Pei Sun, Zhigang Zak Fang, Ying Zhang, Yang Xia |
6. Toward Low-Cost, High-Energy Density, and High-Power Density Lithium-Ion Batteries (this opens in a new tab) | Jianlin Li et al. |
7. Corrosion in the Oil and Gas Industry: An Increasing Challenge for Materials (this opens in a new tab) | Teresa E. Perez |
8. Additive Manufacturing: Making Imagination the Major Limitation (this opens in a new tab) | Yuwei Zhai, Diana A. Lados, Jane L. LaGoy |
9. Materials Design and Discovery with High-Throughput Density Functional Theory: The Open Quantum Materials Database (OQMD) (this opens in a new tab) | James E. Saal, Scott Kirklin, Muratahan Aykol, Bryce Meredig, C. Wolverton |
10. Alloy Design Strategies and Future Trends in High-Entropy Alloys (this opens in a new tab) | Jien-Wei Yeh |
11. Mechanical Properties and Stacking Fault Energies of NiFeCrCoMn High-Entropy Alloy (this opens in a new tab) | A. J. Zaddach, C. Niu, C. C. Koch, D. L. Irving |
12. Reducing Vehicle Weight and Improving U.S. Energy Efficiency Using Integrated Computational Materials Engineering (this opens in a new tab) | William J. Joost |
13. Materials Selection in Gas Turbine Engine Design and the Role of Low Thermal Expansion Materials (this opens in a new tab) | Benjamin W. Lagow |
14. Material and Energy Requirement for Rare Earth Production (this opens in a new tab) | Laura Talens Peiró, Gara Villalba Méndez |
15. Characterization of Nanomaterials (this opens in a new tab) | Shadia J. Ikhmayies |
16. State of the Art in Beta Titanium Alloys for Airframe Applications (this opens in a new tab) | James D. Cotton et al. |
17. Natural-fiber-reinforced polymer composites in automotive applications (this opens in a new tab) | James Holbery, Dan Houston |
18. Machine Learning in Additive Manufacturing: A Review (this opens in a new tab) | Lingbin Meng et al. |
19. Artificial Meat Industry: Production Methodology, Challenges, and Future (this opens in a new tab) | Tarun Mateti, Anindita Laha, Pushpalatha Shenoy |
20. Manufacturing Processes for Permanent Magnets: Part I—Sintering and Casting (this opens in a new tab) | Jun Cui et al. |
21. Ferroelectric Hf0.5Zr0.5O2 Thin Films: A Review of Recent Advances (this opens in a new tab) | Si Joon Kim, Jaidah Mohan, Scott R. Summerfelt, Jiyoung Kim |
22. Advances in Gammalloy Materials–Processes–Application Technology: Successes, Dilemmas, and Future (this opens in a new tab) | Young-Won Kim, Sang-Lan Kim |
23. Alloy Design and Properties Optimization of High-Entropy Alloys (this opens in a new tab) | Y. Zhang, X. Yang, P. K. Liaw |
24. The processing, properties, and structure of carbon fibers (this opens in a new tab) | Marilyn MInus, Satish Kumar |
25. Revealing the Effects of Powder Reuse for Selective Laser Melting by Powder Characterization (this opens in a new tab) | Laura Cordova, Mónica Campos, Tiedo Tinga |
26. Low-Density Steels (this opens in a new tab) | Radhakanta Rana |
27. Prospects for Non-Rare Earth Permanent Magnets for Traction Motors and Generators (this opens in a new tab) | M. J. Kramer, R. W. McCallum, I. A. Anderson, S. Constantinides |
28. Additive Manufacturing of High-Entropy Alloys by Laser Processing (this opens in a new tab) | V. Ocelík, N. Janssen, S. N. Smith, J. Th. M. Hosson |
29. Damascus Steel Revisited (this opens in a new tab) | J. D. Verhoeven, A. H. Pendray, W. E. Dauksch, S. R. Wagstaff |
30. Manufacturing and Security Challenges in 3D Printing (this opens in a new tab) | Steven Eric Zeltmann et al. |
31. Computer Vision and Machine Learning for Autonomous Characterization of AM Powder Feedstocks (this opens in a new tab) | Brian L. DeCost, Harshvardhan Jain, Anthony D. Rollett, Elizabeth A. Holm |
32. Changes in Quartz During Heating and the Possible Effects on Si Production (this opens in a new tab) | Eli Ringdalen |
33. A Review of Secondary Aluminum Production and Its Byproducts (this opens in a new tab) | Sai Krishna Padamata, Andrey Yasinskiy, Peter Polyakov |
34. Strong and Ductile Non-equiatomic High-Entropy Alloys: Design, Processing, Microstructure, and Mechanical Properties (this opens in a new tab) | Zhiming Li, Dierk Raabe |
35. Corrosion of Structural Alloys in High-Temperature Molten Fluoride Salts for Applications in Molten Salt Reactors (this opens in a new tab) | Guiqiu Zheng, Kumar Sridharan |
36. Aluminium Primary Production Off-Gas Composition and Emissions: An Overview (this opens in a new tab) | Thor Anders Aarhaug, Arne Petter Ratvik |
37. Effect of Powder Reuse Times on Additive Manufacturing of Ti-6Al-4V by Selective Electron Beam Melting (this opens in a new tab) | H. P. Tang, M. Qian, N. Liu, X. Z. Zhang, G. Y. Yang, J. Wang |
38. Graphene Properties, Synthesis and Applications: A Review (this opens in a new tab) | Akanksha R. Urade, Indranil Lahiri, K. S. Suresh |
39. Producing bulk ultrafine-grained materials by severe plastic deformation (this opens in a new tab) | Ruslan Z. Valiev et al. |
40. Processing, Microstructure and Mechanical Properties of the CrMnFeCoNi High-Entropy Alloy (this opens in a new tab) | Bernd Gludovatz, Easo P. George, Robert O. Ritchie |
41. Metrology Needs for Metal Additive Manufacturing Powders (this opens in a new tab) | John A. Slotwinski, Edward J. Garboczi |
42. Producing Bulk Ultrafine-Grained Materials by Severe Plastic Deformation: Ten Years Later (this opens in a new tab) | Ruslan Z. Valiev et al. |
43. Processing of Complex Materials in the Copper Industry: Challenges and Opportunities Ahead (this opens in a new tab) | Gerardo Alvear Flores, Carlos Risopatron, Joe Pease |
44. Additive Manufacturing of 17-4 PH Stainless Steel: Post-processing Heat Treatment to Achieve Uniform Reproducible Microstructure (this opens in a new tab) | Sudha Cheruvathur, Eric A. Lass, Carelyn E. Campbell |
45. Disassembly Automation for Recycling End-of-Life Lithium-Ion Pouch Cells (this opens in a new tab) | Liurui Li et al. |
46. Characterization and Control of Powder Properties for Additive Manufacturing (this opens in a new tab) | A. Strondl, O. Lyckfeldt, H. Brodin, U. Ackelid |
47. High-Entropy Metallic Glasses (this opens in a new tab) | W. H. Wang |
48. Metal- and Polymer-Matrix Composites: Functional Lightweight Materials for High-Performance Structures (this opens in a new tab) | Nikhil Gupta, Muralidharan Paramsothy |
49. Precipitation Reactions in Age-Hardenable Alloys During Laser Additive Manufacturing (this opens in a new tab) | Eric A. Jägle et al. |
50. A Review on Additive Manufacturing of Titanium Alloys for Aerospace Applications: Directed Energy Deposition and Beyond Ti-6Al-4V (this opens in a new tab) | Zhiying Liu, Bei He, Tianyi Lyu, Yu Zou |
51. Microstructure and Properties of Aluminum-Containing Refractory High-Entropy Alloys (this opens in a new tab) | O. N. Senkov, C. Woodward, D. B. Miracle |
52. Revisiting (Some of) the Lasting Impacts of the Liberty Ships via a Metallurgical Analysis of Rivets from the SS “John W. Brown” (this opens in a new tab) | M. D. Harris et al. |
53. Methods for Calculating Energy Requirements for Processes in Which a Reactant Is Also a Fuel: Need for Standardization (this opens in a new tab) | H. Y. Sohn, Miguel Olivas-Martinez |
54. Strategy for Texture Management in Metals Additive Manufacturing (this opens in a new tab) | M. M. Kirka et al. |
55. Sintering Trajectories: Description on How Density, Surface Area, and Grain Size Change (this opens in a new tab) | Randall M. German |
56. Review of Mechanical Properties of Ti-6Al-4V Made by Laser-Based Additive Manufacturing Using Powder Feedstock (this opens in a new tab) | Allison M. Beese, Beth E. Carroll |
57. Synthesis of Fe3O4 Nanoparticles with Different Shapes Through a Co-Precipitation Method and Their Application (this opens in a new tab) | Muneer M. Ba-Abbad et al. |
58. Airborne Emissions from Si/FeSi Production (this opens in a new tab) | Ida Kero, Svend Grådahl, Gabriella Tranell |
59. Minimization of Copper Losses in Copper Smelting Slag During Electric Furnace Treatment (this opens in a new tab) | Pascal Coursol et al. |
60. “Bulk” Nanocrystalline Metals: Review of the Current State of the Art and Future Opportunities for Copper and Copper Alloys (this opens in a new tab) | M. A. Tschopp, H. A. Murdoch, L. J. Kecskes, K. A. Darling |
61. Progress in Additive Manufacturing (this opens in a new tab) | Edward D. Herderick |
62. Very High Purity Aluminum: An Historical Perspective (this opens in a new tab) | Stephen J. Lindsay |
63. Graphene: The Thinnest Known Coating for Corrosion Protection (this opens in a new tab) | R. K. Singh Raman, Abhishek Tiwari |
64. Metal Powder for Additive Manufacturing (this opens in a new tab) | M. Qian |
65. Self-Healing Metals and Metal Matrix Composites (this opens in a new tab) | J. B. Ferguson, Benjamin F. Schultz, Pradeep K. Rohatgi |
66. The Structure, Functions, and Mechanical Properties of Keratin (this opens in a new tab) | J. McKittrick et al. |
67. Design of Refractory High-Entropy Alloys (this opens in a new tab) | M. C. Gao et al. |
68. Say what?: The importance of effective communication in engineering (this opens in a new tab) | Marybeth Miceli |
69. High-Entropy Alloys: A Current Evaluation of Founding Ideas and Core Effects and Exploring “Nonlinear Alloys” (this opens in a new tab) | Daniel B. Miracle |
70. Advanced Nanoindentation Testing for Studying Strain-Rate Sensitivity and Activation Volume (this opens in a new tab) | Verena Maier-Kiener, Karsten Durst |
71. Progress Towards Metal Additive Manufacturing Standardization to Support Qualification and Certification (this opens in a new tab) | Mohsen Seifi et al. |
72. Development of the Fray-Farthing-Chen Cambridge Process: Towards the Sustainable Production of Titanium and Its Alloys (this opens in a new tab) | Di Hu et al. |
73. Physical Metallurgy of High-Entropy Alloys (this opens in a new tab) | Jien-Wei Yeh |
74. Additive Manufacturing of NiTi Shape Memory Alloy for Biomedical Applications: Review of the LPBF Process Ecosystem (this opens in a new tab) | Keyvan Safaei et al. |
75. Laser Surface Engineering of Magnesium Alloys: A Review (this opens in a new tab) | Ashish Singh, Sandip P. Harimkar |