1. Development and Evaluation of Dissimilar Gas Tungsten Arc-Welded Joint of P92 Steel/Inconel 617 Alloy for Advanced Ultra-Supercritical Boiler Applications (this opens in a new tab) Kumar, A.; Pandey, C.
2. On the Influence of Alloy Composition on the Additive Manufacturability of Ni-Based Superalloys (this opens in a new tab) Ghoussoub, Joseph N.; Tang, Yuanbo T.; Dick-Cleland, William J. B.; Nemeth, Andre A. N.; Gong, Yilun; McCartney, D. Graham; Cocks, Alan C. F.; Reed, Roger C.
3. Controlled Valence Electron Concentration Approach to Tailor the Microstructure and Phase Stability of an Entropy-Enhanced AlCoCrFeNi Alloy (this opens in a new tab) Oh, Min Chul; Lee, Hansung; Sharma, Ashutosh; Ahn, Byungmin
4. An Updated Index Including Toughness for Hot-Cracking Susceptibility (this opens in a new tab) Tang, Guannan; Gould, Benjamin J.; Ngowe, Abigail; Rollett, Anthony D.
5. A New Recycled Al-Si-Mg Alloy for Sustainable Structural Die Casting Applications (this opens in a new tab) Cinkilic, E. M. R. E.; Moodispaw, M. I. C. H. A. E. L.; Zhang, J. I. A. N. Y. U. E.; Miao, J. I. A. S. H. I.; Luo, A. L. A. N. A.
6. The Effect of Zinc Coating Type on the Morphology, Joint Geometry, and Mechanical Properties of Weld-Brazed Thin-Gauge Automotive Steel (this opens in a new tab) Khan, M. Shehryar; Cho, Y-H; Zhang, S.; Goodwin, F.; Biro, E.; Zhou, Y. N.
7. Novel Surface Topography and Microhardness Characterization of Laser Clad Layer on TC4 Titanium Alloy Using Laser-Induced Breakdown Spectroscopy and Machine Learning (this opens in a new tab) Al-Sayed, Samar Reda; Samad, Fatma Abdel; Mohamed, Tarek; Youssef, Doaa
8. Computational Design of Novel Ni Superalloys with Low Crack Susceptibility for Additive Manufacturing (this opens in a new tab) Yu, Hao; Liang, Jingjing; Bi, Zhongnan; Li, Jinguo; Xu, Wei
9. Tuning Physical Properties of NiFe2O4 and NiFe2O4@SiO2 Nanoferrites by Thermal Treatment (this opens in a new tab) Bajorek, A.; Berger, C.; Dulski, M.; Zubko, M.; Lewinska, S.; Prusik, K.; Slawska-Waniewska, A.; Grasset, F.; Randrianantoandro, N.
10. Study on Microstructure-Property Relationship of Inconel 617 Alloy/304L SS Steel Dissimilar Welds Joint (this opens in a new tab) Kumar, Amit; Guguloth, Krishna; Pandey, Shailesh. M. M.; Fydrych, Dariusz; Sirohi, Sachin; Pandey, Chandan
11. Revealing Microstructural, Textural, and Hardness Evolution of Ti-6Al-4V Sheet Cooled From Sub β -Transus Temperature at Different Rates (this opens in a new tab) Chai, Linjiang; Xia, Jiying; Murty, Korukonda L.; Gu, Xinfu; Fan, Jiangkun; Yao, Zhongwen
12. Factors Distinguishing Hydrogen-Assisted Intergranular and Intergranular-Like Fractures in a Tempered Lath Martensitic Steel (this opens in a new tab) Chen, Tingshu; Chiba, Takahiro; Koyama, Motomichi; Akiyama, Eiji; Takai, Kenichi
13. Relationship Between Work Hardening Capacity and Compressive Creep Behavior in a Hot-Extruded Mg-6Al-1Zn Alloy Rod (this opens in a new tab) Zhang, Yuxiu; Chen, Tao; Kuang, Jie; Huo, Qinghuan
14. Effect of Wear Debris Entrapment on the Tribological Performance of AlCoCrFeNi Produced by Selective Laser Melting or Spark Plasma Sintering (this opens in a new tab) Karimi, J.; Antonov, M.; Prashanth, K. G.
15. Microstructure Evolution and Tensile Properties of a Selectively Laser Melted CoNi-Base Superalloy (this opens in a new tab) Murray, Sean P.; Raeker, Evan B.; Pusch, Kira M.; Frey, Carolina; Torbet, Chris J.; Zhou, Ning; Forsik, Stephane A. J.; Dicus, Austin D.; Colombo, Gian A.; Kirka, Michael M.; Pollock, Tresa M.
16. Tensile Deformation Behavior of a Heterogeneous Structural Dual-Phase Metastable β Titanium Alloy (this opens in a new tab) Chen, Zhuo; Yang, Liang; Ma, Xinkai; Sun, Qi; Li, Fuguo; Fang, Xiaotian
17. Quantitative Microstructural Characterization of Precipitates and Oxide Inclusions in Inconel 625 Superalloy Additively Manufactured by L-PBF Method (this opens in a new tab) Staron, S.; Dubiel, B.; Gola, K.; Kalemba-Rec, I; Gajewska, M.; Pasiowiec, H.; Wrobel, R.; Leinenbach, Ch
18. Effects of Ultrasonic Vibration on Material Flow and Thermal Cycles in Friction Stir Welding of Dissimilar Al/Mg Alloys (this opens in a new tab) Lv, Xueqi; Wu, ChuanSong; Sun, Zhen
19. Hydrogen Isotopes Permeation in Clean or Unoxidized FeCrAl Alloys: A Review (this opens in a new tab) Garud, Yogendra S.; Hoffman, Andrew K.; Rebak, Raul B.
20. Low-Temperature Superplastic Deformation of Cold-Rolled Fe-5.6Mn-1.1Al-0.2C Steel (this opens in a new tab) Zhang, Hongtao; Cai, Minghui; Zhu, Wanjun; Sun, Shenghui; Yan, Haile; Yao, Shengjie; Luan, Yikun; Tang, Shuai; Hodgson, P. D.
21. Strong Impact of Minor Elements on the Microstructural Evolution of an Additively Manufactured Inconel 625 Alloy (this opens in a new tab) He, Mo-Rigen; Banerjee, Arunima; Marvel, Christopher J.; Price, Sam; McCue, Ian; Schwalbach, Edwin J.; Hemker, Kevin J.
22. High Strength and Thermal Stability of Multilayered Cu/Al Composites Fabricated Through Accumulative Roll Bonding and Cryorolling (this opens in a new tab) Gao, Haitao; Li, Jing; Lei, Gang; Song, Lingling; Kong, Charlie; Yu, Hailiang
23. Interfacial Characteristics and Enhanced Mechanical Properties of Al0.5CoCrFeNi High-Entropy Alloy Particles Reinforced Al Matrix Composites (this opens in a new tab) Zhang, Yun; Luo, Kaiguang; Lei, Gang; Yu, Hailiang
24. High-Temperature Annealing Significantly Enhances Intrinsic Hot Workability of the As-cast High-Nitrogen M42 High-Speed Steel (this opens in a new tab) Jiao, Wei-Chao; Li, Hua-Bing; Feng, Hao; Wang, Hai-Jian; Jiang, Zhou-Hua; Wu, Wei
25. Production and Characterization of a Modified Hot Work Tool Steel by Laser Powder Bed Fusion (this opens in a new tab) Deirmina, Faraz; Davies, Paul A.; Dixit, Nikhil; Siriki, Raveendra; Pellizzari, Massimo
