1. Current Challenges and Opportunities in Microstructure-Related Properties of Advanced High-Strength Steels (this opens in a new tab) | Dierk Raabe et al. |
2. Precipitation and Hardening in Magnesium Alloys (this opens in a new tab) | Jian-Feng Nie |
3. Experimental Description of the Al-Cu Binary Phase Diagram (this opens in a new tab) | Ondrej Zobac, Ales Kroupa, Adela Zemanova, Klaus W. Richter |
4. Hydrogen Embrittlement Understood (this opens in a new tab) | Ian M. Robertson et al. |
5. Overview: Computer Vision and Machine Learning for Microstructural Characterization and Analysis (this opens in a new tab) | Elizabeth A. Holm et al. |
6. Thermophysical Properties of Liquid Aluminum (this opens in a new tab) | Matthias Leitner et al. |
7. Electron Beam Based Additive Manufacturing of Alloy 247 for Turbine Engine Application: From Research towards Industrialization (this opens in a new tab) | Markus Ramsperger, Simon Eichler |
8. An Overview of the Thermomechanical Processing of α/β Titanium Alloys: Current Status and Future Research Opportunities (this opens in a new tab) | S. L. Semiatin |
9. Grain Refinement of Alloys in Fusion-Based Additive Manufacturing Processes (this opens in a new tab) | Duyao Zhang et al. |
10. Microstructure and Mechanical Properties of CMSX-4 Single Crystals Prepared by Additive Manufacturing (this opens in a new tab) | C. Körner et al. |
11. The Evolution of Al-Li Base Products for Aerospace and Space Applications (this opens in a new tab) | Roberto J. Rioja, John Liu |
12. Vacuum Evaporation of Pure Metals (this opens in a new tab) | Jafar Safarian, Thorvald A. Engh |
13. Modeling and Simulation of Microstructure Evolution for Additive Manufacturing of Metals: A Critical Review (this opens in a new tab) | Carolin Körner, Matthias Markl, Johannes A. Koepf |
14. As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting (this opens in a new tab) | T. Vilaro, C. Colin, J. D. Bartout |
15. Microstructure, Deformation, and Property of Wrought Magnesium Alloys (this opens in a new tab) | J. F. Nie, K. S. Shin, Z. R. Zeng |
16. Solving Recent Challenges for Wrought Ni-Base Superalloys (this opens in a new tab) | M. C. Hardy et al. |
17. Deformation Mechanisms Rationalisation to Design for Creep Resistance in Polycrystalline Ni-Based Superalloys (this opens in a new tab) | D. Barba et al. |
18. Quantifying Equiaxed vs Epitaxial Solidification in Laser Melting of CMSX-4 Single Crystal Superalloy (this opens in a new tab) | Runbo Jiang et al. |
19. Phase-Field Study of the History-Effect of Remelted Microstructures on Nucleation During Additive Manufacturing of Ni-Based Superalloys (this opens in a new tab) | Murali Uddagiri et al. |
20. Tuning Physical Properties of NiFe2O4 and NiFe2O4@SiO2 Nanoferrites by Thermal Treatment (this opens in a new tab) | A. Bajorek et al. |
21. Hydrogen Diffusion and Trapping in Low-Alloy Tempered Martensitic Steels (this opens in a new tab) | L. Cupertino-Malheiros, A. Oudriss, F. Thébault, M. Piette, X. Feaugas |
22. Effect of Part Thickness and Build Angle on the Microstructure, Surface Roughness, and Mechanical Properties of Additively Manufactured IN-939 (this opens in a new tab) | A. Fardan, U. Klement, H. Brodin, E. Hryha |
23. Magnetic Transformations and Phase Diagrams (this opens in a new tab) | David E. Laughlin |
24. Precipitation Kinetics During Post-heat Treatment of an Additively Manufactured Ferritic Stainless Steel (this opens in a new tab) | Chia-Ying Chou et al. |
25. Perspectives on Quenching and Tempering 4340 Steel (this opens in a new tab) | A. J. Clarke et al. |