Skip to main content
Log in
Experimental Mechanics

An International Journal Integrating Experimental Methods with the Mechanical Behavior of Materials and Structures

Publishing model:

Experimental Mechanics - Top Downloaded Articles of 2023

Ncorr: Open-Source 2D Digital Image Correlation Matlab Software (this opens in a new tab)

J. Blaber, B. Adair, A. Antoniou

Structural Analysis of a Dragonfly Wing (this opens in a new tab)

S. R. Jongerius, D. Lentink

Determination of the Modulus of Elasticity by Bending Tests of Specimens with Nonuniform Cross Section (this opens in a new tab)

M. Gebhardt, H. Steinke, V. Slowik

A Review of Speckle Pattern Fabrication and Assessment for Digital Image Correlation (this opens in a new tab)

Y.L. Dong, B. Pan

Why Is It So Challenging to Measure Residual Stresses ? (this opens in a new tab)

G. S. Schajer, M. B. Prime, P. J. Withers

Meshfree Digital Image Correlation Using Element Free Galerkin Method: Theory, Algorithm and Validation (this opens in a new tab)

B. Chen, S. Coppieters

Determining Dynamic Properties of Elastomer-Dampers by Means of Impact Testing (this opens in a new tab)

T. Rapp, G. Jacobs, J. Berroth, J. Guenther

A Study on the Bending of Laminated Glass Under Blast Loading (this opens in a new tab)

M.A. Samieian et al.

Measuring Residual Strain and Stress in Thermal Spray Coatings Using Neutron Diffractometers (this opens in a new tab)

N. H. Faisal, R. Ahmed, A. K. Prathuru, A. Paradowska, T. L. Lee

Temperature Gradient Determination with Thermography and Image Correlation in Curved Surfaces with Application to Additively Manufactured Components (this opens in a new tab)

S. Hartmann, L. Müller-Lohse, J.-A. Tröger

The Estimation of Taylor-Quinney Coefficients Using Small Ring Specimens (this opens in a new tab)

W.J. Lavie, J.P. Rouse, C.J. Hyde

Ill-Posedness and the Bias-Variance Tradeoff in Residual Stress Measurement Inverse Solutions (this opens in a new tab)

M. Beghini, T. Grossi, M.B. Prime, C. Santus

Direct Measurement of the Transverse Modulus of Carbon Fibres (this opens in a new tab)

S. Wong, A. P. Pierlot, A. M. Abbott, J. A. Schutz

Optimal Design, Development and Experimental Analysis of a Tension–Torsion Hopkinson Bar for the Understanding of Complex Impact Loading Scenarios (this opens in a new tab)

Y. Xu, J. Zhou, L. Farbaniec, A. Pellegrino

Hoop Strain Measurement During a SiC/SiC Ceramic Composite Tube Burst Test by Digital Volume Correlation of X-Ray Computed Tomographs (this opens in a new tab)

S. Zhao, Y. Chen, L. Saucedo-Mora, T. Connolley, T. J. Marrow

Mechanical Characterisation and Simulation of the Tensile Behaviour of Polymeric Additively Manufactured Lattice Structures (this opens in a new tab)

D. Bruson, M. Galati, F. Calignano, L. Iuliano

Recent Progress in Digital Image Correlation (this opens in a new tab)

B. Pan

Influence of the Experimental Setup on the Damping Properties of SLM Lattice Structures (this opens in a new tab)

F. Scalzo, G. Totis, M. Sortino

Experimental Characterization and Numerical Modelling of the Impact Behavior of PVC Foams (this opens in a new tab)

M. Sasso, F. Sarasini, E. Mancini, A. Lattanzi, J. Tirillò, C. Sergi

Experimental and Analytical Study of Free-Fall Drop Impact Testing of Portable Products (this opens in a new tab)

E. Tempelman, M. M. S. Dwaikat, C. Spitás

Navigation