Logo - springer
Slogan - springer

Engineering - Mechanical Engineering | Frontiers of Mechanical Engineering (Editorial Board)

Frontiers of Mechanical Engineering

Frontiers of Mechanical Engineering

Editor-in-Chief: Shuzi Yang

ISSN: 2095-0233 (print version)
ISSN: 2095-0241 (electronic version)

Journal no. 11465

Editor-in-Chief

Shuzi YANG, Huazhong University of Science and Technology, China

Executive Editor-in-Chief

Peihua GU, Shantou University, China

Deputy Editors-in-Chief

I-Ming CHEN, Nanyang Technological University, Singapore

Renyuan FEI, Beijing University of Technology, China

Tielin SHI, Huazhong University of Science and Technology, China

Editorial Advisory Board

Dongming GUO, Dalian University of Technology, China

Peigen LI, Huazhong University of Science and Technology, China

Baicheng LIU, Tsinghua University, China

Bingheng LU, Xi'an Jiaotong University, China

Jianrong TAN, Zhejiang University, China

Bangchun WEN, Northeast University, China

Chunsheng ZHAO, Nanjing University of Aeronautics and Astronautics, China

Members of Editorial Board

Marco Ceccarelli, University of Cassino, Italy

Darong CHEN, Tsinghua University, China

Xuefeng CHEN, Xi'an Jiao Tong University, China

Fulei CHU, Tsinghua University, China

Jian S DAI, University of London, UK

Dapeng FAN, National University of Defense Technology, China

Zailin GUAN, Huazhong University of Science and Technology, China

Tian HUANG, Tianjin University, China

Lan JIANG, Beijing Institute of Technology, China

Dichen LI, Xi'an Jiao Tong University, China

Weihua LI, University of Wollongong, Australia

Jianzhong LIN, Zhejiang University, China

Yuyi LIN, University of Missouri, USA

Guixiong LIU, South China University of Technology, China

Xinjun LIU, Tsinghua University, China

Ruxin NING, Beijing Institute of Technology, China

Zhike PENG, Shanghai Jiao Tong University, China

Linmao QIAN, Southwest Jiao Tong University, China

Jinhao QIU, Nanjing University of Aeronautics and Astronautics, China

Hong-Bo SUN, Jilin University, China

Shan-Tung TU, East China University of Science and Technology, China

Hai-Dou WANG, Academy of Armed Forces Engineering, China

Jun WANG, The University of New South Wales, Australia

Michael Yu WANG, The Chinese University of Hong Kong, China

Shuxin WANG, Tianjin University, China

Xiankui WANG, Tsinghua University, China

Cunxi XIE, South China University of Technology, China

Xiaoli XU, Beijing Information Science and Technology University, China

Hong Sen YAN, Cheng Kung University, China

Huayong YANG, Zhejiang University, China

Yan-An YAO, Beijing Jiao Tong University, China

Zhouping YIN, Huazhong University of Science and Technology, China

Dejie YU, Hunan University, China

Jingjun YU, Beihang University, China

Yueqing YU, Beijing University of Technology, China

Guisheng ZHAI, Shibaura Institute of Technology, Japan

Wanming ZHAI, Southwest Jiao Tong University, China

Haixia ZHANG, Peking University, China

Jianhui ZHANG, Nanjing University of Aeronautics and Astronautics,China

Nong ZHANG, University of Technology, Sydney, Australia

Xiancheng ZHANG, East China University of Science and Technology, China

Xianmin ZHANG, South China University of Technology, China

Lidong ZHAO, RWTH Aachen University, Germany

Wansheng ZHAO, Shanghai Jiao Tong University, China

Minhao ZHU, Southwest Jiao Tong University, China

Teresa Zielinska, Warsaw University of Technology, Poland

Huijun ZOU, Shanghai Jiao Tong University, China

Managing Editors

Tingting GUO, Higher Education Press, China

Xixi CHEN, Huazhong University of Science and Technology, China

 

Articles

For authors and editors

  • Aims and Scope

    Aims and Scope

    Close

    Frontiers of Mechanical Engineering is an international peer-reviewed academic journal sponsored by the Ministry of Education of China. The journal seeks to provide a forum for a broad blend of high-quality academic papers in order to promote rapid communication and exchange between researchers, scientists, and engineers in the field of mechanical engineering. The journal publishes original research articles, review articles and feature articles. 

    The journal covers all major branches of mechanical engineering including (not limited to): machines and mechanisms, gears and transmissions, mechanical system dynamics, mechanical structures and stress analysis, tribology and surface technology, mechanical design and bionics, machining processes and technologies, manufacturing automation, precision engineering, mechatronics and embedded systems, micro/nano manufacturing and systems, robotics, sensing, MEMS, and green manufacturing. 

  • Submit Online
  • Instructions for Authors (pdf, 112 kB)
  • Manuscript Template (pdf, 176 kB)
  • English Language Editing

    English Language Editing

    Close

  • Author Academy: Training for Authors
  • Copyright information

    Copyright information

    Close

    Copyright Information

    For Authors

    Submission of a manuscript implies: that the work described has not been published before (except in form of an abstract or as part of a published lecture, review or thesis); that it is not under consideration for publication elsewhere; that its publication has been approved by all co-authors, if any, as well as – tacitly or explicitly – by the responsible authorities at the institution where the work was carried out.

    Author warrants (i) that he/she is the sole owner or has been authorized by any additional copyright owner to assign the right, (ii) that the article does not infringe any third party rights and no license from or payments to a third party is required to publish the article and (iii) that the article has not been previously published or licensed. The author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. Transfer of copyright to Springer (respective to owner if other than Springer) becomes effective if and when a Copyright Transfer Statement is signed or transferred electronically by the corresponding author. After submission of the Copyright Transfer Statement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted by Springer.

    The copyright to this article, including any graphic elements therein (e.g. illustrations, charts, moving images), is assigned for good and valuable consideration to Springer effective if and when the article is accepted for publication and to the extent assignable if assignability is restricted for by applicable law or regulations (e.g. for U.S. government or crown employees).

    The copyright assignment includes without limitation the exclusive, assignable and sublicensable right, unlimited in time and territory, to reproduce, publish, distribute, transmit, make available and store the article, including abstracts thereof, in all forms of media of expression now known or developed in the future, including pre- and reprints, translations, photographic reproductions and microform. Springer may use the article in whole or in part in electronic form, such as use in databases or data networks for display, print or download to stationary or portable devices. This includes interactive and multimedia use and the right to alter the article to the extent necessary for such use.

    Authors may self-archive the Author's accepted manuscript of their articles on their own websites. Authors may also deposit this version of the article in any repository, provided it is only made publicly available 12 months after official publication or later. He/she may not use the publisher's version (the final article), which is posted on SpringerLink and other Springer websites, for the purpose of self-archiving or deposit. Furthermore, the Author may only post his/her version provided acknowledgement is given to the original source of publication and a link is inserted to the published article on Springer's website. The link must be accompanied by the following text: "The final publication is available at link.springer.com".

    Prior versions of the article published on non-commercial pre-print servers like arXiv.org can remain on these servers and/or can be updated with Author's accepted version. The final published version (in pdf or html/xml format) cannot be used for this purpose. Acknowledgement needs to be given to the final publication and a link must be inserted to the published article on Springer's website, accompanied by the text "The final publication is available at link.springer.com". Author retains the right to use his/her article for his/her further scientific career by including the final published journal article in other publications such as dissertations and postdoctoral qualifications provided acknowledgement is given to the original source of publication.

    Author is requested to use the appropriate DOI for the article. Articles disseminated via link.springer.com are indexed, abstracted and referenced by many abstracting and information services, bibliographic networks, subscription agencies, library networks, and consortia.

    For Readers

    While the advice and information in this journal is believed to be true and accurate at the date of its publication, neither the authors, the editors, nor the publisher can accept any legal responsibility for any errors or omissions that may have been made. The publisher makes no warranty, express or implied, with respect to the material contained herein.

    All articles published in this journal are protected by copyright, which covers the exclusive rights to reproduce and distribute the article (e.g., as offprints), as well as all translation rights. No material published in this journal may be reproduced photographically or stored on microfilm, in electronic data bases, video disks, etc., without first obtaining written permission from the publisher (respective the copyright owner if other than Springer). The use of general descriptive names, trade names, trademarks, etc., in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.

    Springer has partnered with Copyright Clearance Center's RightsLink service to offer a variety of options for reusing Springer content. For permission to reuse our content please locate the material that you wish to use on link.springer.com or on springerimages.com and click on the permissions link or go to copyright.com, then enter the title of the publication that you wish to use. For assistance in placing a permission request, Copyright Clearance Center can be connected directly via phone: +1-855-239-3415, fax: +1-978-646-8600, or e-mail: info@copyright.com.


    © Higher Education Press and Springer-Verlag Berlin Heidelberg

Alerts for this journal

 

Get the table of contents of every new issue published in Frontiers of Mechanical Engineering.