Logo - springer
Slogan - springer

Engineering - Electronics & Electrical Engineering | Design Automation for Embedded Systems - incl. option to publish open access (Editorial Board)

Design Automation for Embedded Systems

Design Automation for Embedded Systems

An International Journal

Editors-in-Chief: R.A. Bergamaschi; W. Rosenstiel

ISSN: 0929-5585 (print version)
ISSN: 1572-8080 (electronic version)

Journal no. 10617

$99.00 Personal Rate e-only for the Americas
Get Subscription

Online subscription, valid from January through December of current calendar year

Immediate access to this year's issues via SpringerLink

1 Volume(-s) with 4 issue(-s) per annual subscription

Automatic annual renewal

More information: >> FAQs // >> Policy

Editors-in-Chief:

Reinaldo A. Bergamaschi
Odysci, Inc., Campinas, Brazil

Wolfgang Rosenstiel
Universität Tübingen, Germany

Associate Editor Board:

Rodolfo Jardim de Azevedo, University of Campinas, Brazil
Davide Bertozzi, University of Ferrara, Italy
Luiz C. V. Santos, Federal University of Santa Catarina, Brazil
Samarjit Chakraborty, TU Munich, Germanuy
Jian-Jia Chen, TU Dortmund, Germany
Kiyoung Choi, Seoul National University, Republic of Korea
Pai H. Chou, UC Irvine,  USA
Erika Fernandes Cota, Federal University of Rio Grande do Sul, Brazil 
Gero Dittmann, IBM Research Zurich, Switzerland
Rolf Drechsler, University of Bremen, Germany
Franco Fummi, University of Verona, Italy
Catherine Gebotys, University of Waterloo, Canada
Kees Goossens, Eindhoven university of Technology, The Netherlands
Andreas Herkersdorf, TU Munich, Germany 
Masaharu Imai, Osaka University, Japan
Reiley Jeyapaul, ARM Ltd Cambridge,  United Kingdom
Fadi Kurdahi, UC Irvine, USA
Peter Marwedel, TU Dortmund, Germany
Cecilia Metra, University of Bologna, Italy
Gabriela Nicolescu, Polytechnique Montreal, Canada
Hiren Patel, University of Waterloo, Canada
Marco Platzner, Paderborn University, Germany
Martin Radetzki, Stuttgart University, Germany
Donatella Sciuto, Politecnico di Milano, Italy
Aviral Shrivastava, Arizona State University, USA
Hiroyuki Tomiyama, Ritsumeikan University, Japan
Kazutoshi Wakabayashi, NEC Corp., Kawasaki, JAPAN
Norbert When, TU Kaiserslautern, Germany
Markus Winterholer, Cadence Design Systems, Switzerland
Haibo Zeng, Virginia Tech, USA
Zhiru Zhang, Cornell University, USA
Mark Zwolinski, Southampton University, United Kingdom

Read this Journal on Springerlink

For authors and editors


  • Journal Citation Reports®
    2016 Impact Factor
  • 0.516
  • Aims and Scope

    Aims and Scope

    Close

    Embedded (electronic) systems have become the electronic engines of modern consumer and industrial devices, from automobiles to satellites, from washing machines to high-definition TVs, and from cellular phones to complete base stations. These embedded systems encompass a variety of hardware and software components which implement a wide range of functions including digital, analog and RF parts.

    Although embedded systems have been designed for decades, the systematic design of such systems with well defined methodologies, automation tools and technologies has gained attention primarily in the last decade. Advances in silicon technology and increasingly demanding applications have significantly expanded the scope and complexity of embedded systems. These systems are only now becoming possible due to advances in methodologies, tools, architectures and design techniques.

    Design Automation for Embedded Systems is a multidisciplinary journal which addresses the systematic design of embedded systems, focusing primarily on tools, methodologies and architectures for embedded systems, including HW/SW co-design, simulation and modeling approaches, synthesis techniques, architectures and design exploration, among others.

    Design Automation for Embedded Systems offers a forum for scientist and engineers to report on their latest works on algorithms, tools, architectures, case studies and real design examples related to embedded systems hardware and software.

    Design Automation for Embedded Systems is an innovative journal which distinguishes itself by welcoming high-quality papers on the methodology, tools, architectures and design of electronic embedded systems, leading to a true multidisciplinary system design journal.

  • Submit Online
  • Open Choice - Your Way to Open Access
  • Instructions for Authors

    Instructions for Authors

    Close

  • CfP: Languages, Models and Model Based D...
  • CfP: Self-Adaptive Networked Embedded Sy...
  • Author Academy: Training for Authors
  • English Language Editing

    English Language Editing

    Close

  • Copyright Information

    Copyright Information

    Close

    Copyright Information

    For Authors

    Submission of a manuscript implies: that the work described has not been published before (except in form of an abstract or as part of a published lecture, review or thesis); that it is not under consideration for publication elsewhere; that its publication has been approved by all co-authors, if any, as well as – tacitly or explicitly – by the responsible authorities at the institution where the work was carried out.

    Author warrants (i) that he/she is the sole owner or has been authorized by any additional copyright owner to assign the right, (ii) that the article does not infringe any third party rights and no license from or payments to a third party is required to publish the article and (iii) that the article has not been previously published or licensed. The author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. Transfer of copyright to Springer (respective to owner if other than Springer) becomes effective if and when a Copyright Transfer Statement is signed or transferred electronically by the corresponding author. After submission of the Copyright Transfer Statement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted by Springer.

    The copyright to this article, including any graphic elements therein (e.g. illustrations, charts, moving images), is assigned for good and valuable consideration to Springer effective if and when the article is accepted for publication and to the extent assignable if assignability is restricted for by applicable law or regulations (e.g. for U.S. government or crown employees).

    The copyright assignment includes without limitation the exclusive, assignable and sublicensable right, unlimited in time and territory, to reproduce, publish, distribute, transmit, make available and store the article, including abstracts thereof, in all forms of media of expression now known or developed in the future, including pre- and reprints, translations, photographic reproductions and microform. Springer may use the article in whole or in part in electronic form, such as use in databases or data networks for display, print or download to stationary or portable devices. This includes interactive and multimedia use and the right to alter the article to the extent necessary for such use.

    Authors may self-archive the Author's accepted manuscript of their articles on their own websites. Authors may also deposit this version of the article in any repository, provided it is only made publicly available 12 months after official publication or later. He/she may not use the publisher's version (the final article), which is posted on SpringerLink and other Springer websites, for the purpose of self-archiving or deposit. Furthermore, the Author may only post his/her version provided acknowledgement is given to the original source of publication and a link is inserted to the published article on Springer's website. The link must be accompanied by the following text: "The final publication is available at link.springer.com".

    Prior versions of the article published on non-commercial pre-print servers like arXiv.org can remain on these servers and/or can be updated with Author's accepted version. The final published version (in pdf or html/xml format) cannot be used for this purpose. Acknowledgement needs to be given to the final publication and a link must be inserted to the published article on Springer's website, accompanied by the text "The final publication is available at link.springer.com". Author retains the right to use his/her article for his/her further scientific career by including the final published journal article in other publications such as dissertations and postdoctoral qualifications provided acknowledgement is given to the original source of publication.

    Author is requested to use the appropriate DOI for the article. Articles disseminated via link.springer.com are indexed, abstracted and referenced by many abstracting and information services, bibliographic networks, subscription agencies, library networks, and consortia.

    For Readers

    While the advice and information in this journal is believed to be true and accurate at the date of its publication, neither the authors, the editors, nor the publisher can accept any legal responsibility for any errors or omissions that may have been made. The publisher makes no warranty, express or implied, with respect to the material contained herein.

    All articles published in this journal are protected by copyright, which covers the exclusive rights to reproduce and distribute the article (e.g., as offprints), as well as all translation rights. No material published in this journal may be reproduced photographically or stored on microfilm, in electronic data bases, video disks, etc., without first obtaining written permission from the publisher (respective the copyright owner if other than Springer). The use of general descriptive names, trade names, trademarks, etc., in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.

    Springer has partnered with Copyright Clearance Center's RightsLink service to offer a variety of options for reusing Springer content. For permission to reuse our content please locate the material that you wish to use on link.springer.com or on springerimages.com and click on the permissions link or go to copyright.com, then enter the title of the publication that you wish to use. For assistance in placing a permission request, Copyright Clearance Center can be connected directly via phone: +1-855-239-3415, fax: +1-978-646-8600, or e-mail: info@copyright.com.


    © Springer Science+Business Media New York

Alerts for this journal

 

Get the table of contents of every new issue published in Design Automation for Embedded Systems.