Logo - springer
Slogan - springer

Engineering - Civil Engineering | Journal of Material Cycles and Waste Management – incl. option to publish open access (Editorial Board)

Journal of Material Cycles and Waste Management

Journal of Material Cycles and Waste Management

Official Journal of the Japan Society of Material Cycles and Waste Management (JSMCWM) and the Korea Society of Waste Management (KSWM)

Editors-in-Chief: S.-i. Sakai; T. Yoshioka; Y.-C. Seo

ISSN: 1438-4957 (print version)
ISSN: 1611-8227 (electronic version)

Journal no. 10163

Chief Editors

Shin-ichi Sakai, Kyoto University, Japan
Toshiaki Yoshioka, Tohoku University, Japan
Yong-Chil Seo, Yonsei University, Korea


Editorial Board

Sung-Keun Bae, Changwon National University, Korea
Thallada Bhaskar, Indian Institute of Petroleum (IIP), India
Helge Brattebø, Norwegian University of Science and Technology (NTNU), Norway
Paul H. Brunner, Vienna University of Technology, Austria
Alfons Buekens, Free University of Brussels, Belgium
Tien Chin Chang, National Taipei University of Technology, Taiwan R.O.C.
Thomas H. Christensen, Technical University of Denmark, Denmark
Moonkyung Chung, Korea Institute of Construction Technology, Korea
Luis F. Diaz, CalRecovery Inc., USA
Jong-In Dong, The University of Seoul, Korea
Heidelore Fiedler, United Nations Environment Programme-Chemicals, Switzerland
Koichi Fujie, Yokohama National University, Japan
Pin-Jing He, Tongji University, China
Stefanie Hellweg, Swiss Federal Institute of Technology; ETH Zurich, Switzerland
Yasuhiro Hirai, Kyoto University, Japan
Makoto Hisada, Tohoku University, Japan
William Hogland, Linnaeus University, Sweden
Eiji Hosoda, Keio University, Japan
Yasuhiko Hotta, Institute for Global Environmental Strategies
(IGES), Japan
Gjalt Huppes, Leiden University, The Netherlands
Jae-Hyuk Hyun, Chungnam National University, Korea
Hideaki Ito, Nagoya University, Japan
Yong-Chul Jang, Chungnam National University, Korea
Myung Chae Jung, Sejong University, Korea
Masashi Kamon, Takamatsu National College of Technology, Japan
Hidehiro Kaneko, University of Yamanashi, Japan
Takeshi Katsumi, Kyoto University, Japan
Akiko Kida, Ehime University, Japan
Jae Young Kim, Seoul National University, Korea
René Kleijn, Leiden University, The Netherlands
Yasushi Kondo, Waseda University, Japan
Jai-Young Lee, University of Seoul, Korea
Jinhui Li, Tsinghua University, China
Thomas Lindhqvist, Lund University, Sweden
Hsiao-Kang Ma, National Taiwan University, Taiwan
Yasushi Matsufuji, Fukuoka University, Japan
Toshihiko Matsuto, Hokkaido University, Japan
Dal-Ki Min, Gachon University, Korea
Stephen Moore, The University of New South Wales, Australia
Yuichi Moriguchi, The University of Tokyo, Japan
Velayutham Murugesan, Anna University, India
Olandele A. Ogunseitan, University of California, Irvine, USA
Gil-Jong Oh, National Institute of Environmental Research, Korea
Jan A. Oleszkiewicz, University of Manitoba, Canada
Tadashi Otsuka, Waseda University, Japan
Agamuthu Pariatamby, University of Malaya, Malaysia
Jin-Won Park, Yonsei University, Korea
Chae-Gun Phae, Seoul National University of Technology, Korea
Chavalit Ratanatamskul, Chulalongkorn University, Thailand
Barbara Reck, Yale University, USA
Kang-In Rhee, Korea Institute of Geoscience and Material Resources, Korea
Seung-Whee Rhee, Kyonggi University, Korea
Vera Susanne Rotter, Technische Universität Berlin, Germany
Heinz Schandl, Commonwealth Scientifi c and Industrial Research Organisation (CSIRO); Sustainable Ecosystems, Australia
Takayuki Shimaoka, Kyushu University, Japan
Orawan Siriratpiriya, Chulalongkorn University, Thailand
John H. Skinner, Solid Waste Association of North America (SWANA), USA
Kazuhiro Takamizawa, Gifu University, Japan
Masaki Takaoka, Kyoto University, Japan
Masaru Tanaka, Tottori University of Environmental Studies, Japan
Tomohiro Tasaki, National Institute for Environmental Studies, Japan
Kazuhiro Ueta, Kyoto University, Japan
Carlo Vandecasteele, Leuven University, Belgium
Jürgen Vehlow, Karlsruhe Institute Technology (KIT), Germany
Wei Wang, Tsinghua University, China
Hong Yao, Huazhong University of Science and Technology (HUST), China

 

Articles

Read this Journal on Springerlink

For authors and editors


  • Journal Citation Reports®, Thomson Reuters
    2013 Impact Factor
  • 0.831
  • Aims and Scope

    Aims and Scope

    Close

    The aim of the Journal of Material Cycles and Waste Management is to develop solutions and prescriptions for material cycles. The focus of the journal is twofold: research in technical, political, and environmental problems of material cycles and waste management; and information that contributes to the development of an interdisciplinary science of material cycles and waste management.

    The journal publishes original articles, reviews, and invited papers from a wide range of disciplines related to material cycles and waste management. Experts on material cycles and waste management from all parts of the world are encouraged to submit their work for publication, and Asia-related research and other information is especially welcome. For details of format and length of articles, please consult the "Instructions to Authors" published in the journal.

     

  • Submit Online
  • Open Choice - Your Way to Open Access
  • Announcement

    Announcement

    Close

  • Instructions for Authors

    Instructions for Authors

    Close

  • Certification Form (pdf, 16 kB)
  • English Language Editing

    English Language Editing

    Close

  • Author Academy: Training for Authors
  • Copyright information

    Copyright information

    Close

    Copyright Information

    For Authors

    Submission of a manuscript implies: that the work described has not been published before (except in form of an abstract or as part of a published lecture, review or thesis); that it is not under consideration for publication elsewhere; that its publication has been approved by all co-authors, if any, as well as – tacitly or explicitly – by the responsible authorities at the institution where the work was carried out.

    Author warrants (i) that he/she is the sole owner or has been authorized by any additional copyright owner to assign the right, (ii) that the article does not infringe any third party rights and no license from or payments to a third party is required to publish the article and (iii) that the article has not been previously published or licensed. The author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. Transfer of copyright to Springer (respective to owner if other than Springer) becomes effective if and when a Copyright Transfer Statement is signed or transferred electronically by the corresponding author. After submission of the Copyright Transfer Statement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted by Springer.

    The copyright to this article, including any graphic elements therein (e.g. illustrations, charts, moving images), is assigned for good and valuable consideration to Springer effective if and when the article is accepted for publication and to the extent assignable if assignability is restricted for by applicable law or regulations (e.g. for U.S. government or crown employees).

    The copyright assignment includes without limitation the exclusive, assignable and sublicensable right, unlimited in time and territory, to reproduce, publish, distribute, transmit, make available and store the article, including abstracts thereof, in all forms of media of expression now known or developed in the future, including pre- and reprints, translations, photographic reproductions and microform. Springer may use the article in whole or in part in electronic form, such as use in databases or data networks for display, print or download to stationary or portable devices. This includes interactive and multimedia use and the right to alter the article to the extent necessary for such use.

    Authors may self-archive the Author's accepted manuscript of their articles on their own websites. Authors may also deposit this version of the article in any repository, provided it is only made publicly available 12 months after official publication or later. He/she may not use the publisher's version (the final article), which is posted on SpringerLink and other Springer websites, for the purpose of self-archiving or deposit. Furthermore, the Author may only post his/her version provided acknowledgement is given to the original source of publication and a link is inserted to the published article on Springer's website. The link must be accompanied by the following text: "The final publication is available at link.springer.com".

    Prior versions of the article published on non-commercial pre-print servers like arXiv.org can remain on these servers and/or can be updated with Author's accepted version. The final published version (in pdf or html/xml format) cannot be used for this purpose. Acknowledgement needs to be given to the final publication and a link must be inserted to the published article on Springer's website, accompanied by the text "The final publication is available at link.springer.com". Author retains the right to use his/her article for his/her further scientific career by including the final published journal article in other publications such as dissertations and postdoctoral qualifications provided acknowledgement is given to the original source of publication.

    Author is requested to use the appropriate DOI for the article. Articles disseminated via link.springer.com are indexed, abstracted and referenced by many abstracting and information services, bibliographic networks, subscription agencies, library networks, and consortia.

    For Readers

    While the advice and information in this journal is believed to be true and accurate at the date of its publication, neither the authors, the editors, nor the publisher can accept any legal responsibility for any errors or omissions that may have been made. The publisher makes no warranty, express or implied, with respect to the material contained herein.

    All articles published in this journal are protected by copyright, which covers the exclusive rights to reproduce and distribute the article (e.g., as offprints), as well as all translation rights. No material published in this journal may be reproduced photographically or stored on microfilm, in electronic data bases, video disks, etc., without first obtaining written permission from the publisher (respective the copyright owner if other than Springer). The use of general descriptive names, trade names, trademarks, etc., in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.

    Springer has partnered with Copyright Clearance Center's RightsLink service to offer a variety of options for reusing Springer content. For permission to reuse our content please locate the material that you wish to use on link.springer.com or on springerimages.com and click on the permissions link or go to copyright.com, then enter the title of the publication that you wish to use. For assistance in placing a permission request, Copyright Clearance Center can be connected directly via phone: +1-855-239-3415, fax: +1-978-646-8600, or e-mail: info@copyright.com.


    © Springer Japan

Alerts for this journal

 

Get the table of contents of every new issue published in Journal of Material Cycles and Waste Management.