Logo - springer
Slogan - springer

Earth Sciences & Geography - Environmental Science & Engineering | Earthquake Engineering and Engineering Vibration (Editorial Board)

Earthquake Engineering and Engineering Vibration

Earthquake Engineering and Engineering Vibration

Editors-in-Chief: X.Z. Qi; G.C. Lee

ISSN: 1671-3664 (print version)
ISSN: 1993-503X (electronic version)

Journal no. 11803

Chairman:

Prof. XIE Lili, Institute of Engineering Mechanics (IEM), China Earthquake Administration (CEA), China.

Editor-in-Chief (Harbin, China) :

Prof. QI Xiaozhai, Institute of Engineering Mechanics (IEM), China Earthquake Administration (CEA), 9 Xuefu Road, Harbin 150080, China 

Editor-in-Chief (Buffalo, USA) :

Prof. George C. LEE, MCEER, Department of Civil Structural and Environmental Engineering, University at Buffalo, State University of New York, Buffalo, NY 14261, USA

Members:

Roger BORCHERDT, U.S. Geological Survey, USA

Fabio CASCIATI, Department of Structural Mechanics, University of Pavia, Italy

Kuo-Chun CHANG, Center for Research on Earthquake Engineering, Chinese Taipei

CHEN Houqun, Research Institute of Earthquake Resistance, Research Academy of Hydraulic Engineering, China

S. CHERRY, Department of Civil Engi ering, Univer sity of British Columbia, Canada

Gian Paolo CIMELLARO,Department of Structural, Geotechnical & Building Engineering (DISEG), 

Politecnico di Torino, Italy

Weimin DONG, Risk Management Solutions, Inc., USA

DU Xiuli, Beijing University of Technology, China

Peter FAJFAR, Department of Civil Engineering, University of Ljubljana, Slovenia

FAN Lichu, Department of Bridge Engineering, Tongji University, China

Andre FILIATRAULT, MCEER, Department of Civil, Structural and Environmental Engineering, State University of New York, USA

George GAZETAS, 36 Asimakopoulou Str., Ag. Paraskevi 15342, Athens, Greece

P. GULKANMiddle East Technical University, Ankara, Turkey

HU Yuxian, Institute of Engineering Mechanics, China Earthquake Adminstration, China

W. D. IWAN, California Institute of Technology, USA

Sudhir JAIN, Department of Civil Engineering, Indian Institute of Technology, India

Jae Kwan KIM, Korea Earthquake Engineering Research Center, Seoul National University, Korea

George C. LEE, MCEER, Department of Civil Structural and Environmental Engineering, University at Buffalo, State University of New York, USA

LI Hongnan, Dalian University of Technology, China

LI Jie, Institute of Architectural Engineering, Tongji University, China

LIAO Zhenpeng, Institute of Engineering Mechanics, China Earthquake Administration, China

LIN Gao, Department of Civil Engineering, Dalian University of Technology, China

Shih-Chi LIU, National Science Foundation, Arlington, Virginia, USA

LU Xilin, School of Civil Engineering, Tongji University, China

Stephen MAHIN, Pacific Earthquake Engineering Research Center, University of California, Berkeley, USA

Carlos Sousa OLIVEIRA, Instituto Superior Tecnico, Portugal

OU Jinping, Dalian University of Technology, China

QI Xiaozhai, Institute of Engineering Mechanics, China Earthquake Administration, China

QIAN Jiaru, Department of Civil Engineering, Tsing- hua University, China

M. Saiid SAIIDI, Department of Civil Engineering, University of Nevada-Reno, USA

P. SPANOS, Department of Civil Engineering, Rice University, USA

B. F. SPENCER, Department of Civil Engineering, University of Illinois at Urbana-Champaign, USA

SUN Baitao, Institute of Engineering Mechanics, China Earthquake Administration, China

TAO Xiaxin, School of Civil Engineering, Harbin Institute of Technology, China

Robert TREMBLAY, Department of Civil Engineering, Ecole Polytechnique, Montreal, Canada

A. WADA, Tokyo Institute of Technology, Kanagawa, Japan

WANG Yayong, Institute of Earthquake Engineering, China Academy of Building Research, China

XIE Lili, Institute of Engineering Mechanics, China Earthquake Administration, China

XU Youlin, Department of Civil and Structural Engineering, Hong Kong Polytechnic University, Hong Kong, China

Manabu YOSHIMURA, Tokyo Metropolitan University, Japan

YUAN Xiaoming, Institute of Engineering Mechanics, China Earthquake Administration, China

ZHANG Chuhan, Department of Hydraulic Engineering, Tsinghua University, China

ZHANG Minzheng, Institute of Engineering Mechanics, China Earthquake Administration, China

ZHOU Fulin, Department of Civil Engineering, Guangzhou University, China

Managing Editor: XIONG Jianguo (for current issue)

Professor, Institute of Engineering Mechanics, CEA, 9 Xuefu Road, Harbin 150080, China

 

Articles

For authors and editors


  • Journal Citation Reports®, Thomson Reuters
    2013 Impact Factor
  • 0.475
  • Aims and Scope

    Aims and Scope

    Close

    Founded in 2002 and publishing quarterly as of 2007, Earthquake Engineering and Engineering Vibration is an international journal sponsored by the Institute of Engineering Mechanics (IEM), China Earthquake Administration, co-sponsored by Huixian Earthquake Engineering Foundation (China) and United States-China Earthquake Engineering Foundation (USA). It promotes scientific exchange between Chinese and foreign scientists and engineers, to improve the theory and practice of earthquake hazards mitigation, preparedness, and recovery.

    To accomplish this purpose, the journal aims to attract a balance of Chinese and international authors by publishing original and invited papers addressing the latest theories and applications of interest to earthquake engineering communities, both in China and other countries. The journal has a special interest in encouraging joint authorship between Chinese and foreign contributors such as that resulting from the PRC - US cooperative research projects.

    The following is a list of some subject areas describing the scope of the journal:

    • Evaluation of damage to structures and engineering systems resulting from recent earthquakes
    • New observations of strong motion characteristics and data processing techniques
    • Seismic risk and hazard analysis of civil infrastructure systems
    • Site effects on structures and geotechnical earthquake engineering
    • Seismic behavior and design criteria for buildings and lifeline systems
    • Advances in structural dynamics relevant to earthquake engineering
    • Theory and practice of health monitoring for structures under extreme loading.
    • Seismic retrofit strategies for existing infrastructure systems
    • Structural response modification using emerging control technologies and high performance materials
    • Engineering structural vibration under wind, wave and other dynamic loading
  • Submit Online
  • Instructions for Authors (pdf, 18 kB)
  • English Language Editing

    English Language Editing

    Close

  • Copyright Transfer Statement (pdf, 33 kB...
  • Author Academy: Training for Authors
  • Copyright information

    Copyright information

    Close

    Copyright Information

    For Authors

    Submission of a manuscript implies: that the work described has not been published before (except in form of an abstract or as part of a published lecture, review or thesis); that it is not under consideration for publication elsewhere; that its publication has been approved by all co-authors, if any, as well as – tacitly or explicitly – by the responsible authorities at the institution where the work was carried out.

    Author warrants (i) that he/she is the sole owner or has been authorized by any additional copyright owner to assign the right, (ii) that the article does not infringe any third party rights and no license from or payments to a third party is required to publish the article and (iii) that the article has not been previously published or licensed. The author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. Transfer of copyright to Springer (respective to owner if other than Springer) becomes effective if and when a Copyright Transfer Statement is signed or transferred electronically by the corresponding author. After submission of the Copyright Transfer Statement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted by Springer.

    The copyright to this article, including any graphic elements therein (e.g. illustrations, charts, moving images), is assigned for good and valuable consideration to Springer effective if and when the article is accepted for publication and to the extent assignable if assignability is restricted for by applicable law or regulations (e.g. for U.S. government or crown employees).

    The copyright assignment includes without limitation the exclusive, assignable and sublicensable right, unlimited in time and territory, to reproduce, publish, distribute, transmit, make available and store the article, including abstracts thereof, in all forms of media of expression now known or developed in the future, including pre- and reprints, translations, photographic reproductions and microform. Springer may use the article in whole or in part in electronic form, such as use in databases or data networks for display, print or download to stationary or portable devices. This includes interactive and multimedia use and the right to alter the article to the extent necessary for such use.

    Authors may self-archive the Author's accepted manuscript of their articles on their own websites. Authors may also deposit this version of the article in any repository, provided it is only made publicly available 12 months after official publication or later. He/she may not use the publisher's version (the final article), which is posted on SpringerLink and other Springer websites, for the purpose of self-archiving or deposit. Furthermore, the Author may only post his/her version provided acknowledgement is given to the original source of publication and a link is inserted to the published article on Springer's website. The link must be accompanied by the following text: "The final publication is available at link.springer.com".

    Prior versions of the article published on non-commercial pre-print servers like arXiv.org can remain on these servers and/or can be updated with Author's accepted version. The final published version (in pdf or html/xml format) cannot be used for this purpose. Acknowledgement needs to be given to the final publication and a link must be inserted to the published article on Springer's website, accompanied by the text "The final publication is available at link.springer.com". Author retains the right to use his/her article for his/her further scientific career by including the final published journal article in other publications such as dissertations and postdoctoral qualifications provided acknowledgement is given to the original source of publication.

    Author is requested to use the appropriate DOI for the article. Articles disseminated via link.springer.com are indexed, abstracted and referenced by many abstracting and information services, bibliographic networks, subscription agencies, library networks, and consortia.

    For Readers

    While the advice and information in this journal is believed to be true and accurate at the date of its publication, neither the authors, the editors, nor the publisher can accept any legal responsibility for any errors or omissions that may have been made. The publisher makes no warranty, express or implied, with respect to the material contained herein.

    All articles published in this journal are protected by copyright, which covers the exclusive rights to reproduce and distribute the article (e.g., as offprints), as well as all translation rights. No material published in this journal may be reproduced photographically or stored on microfilm, in electronic data bases, video disks, etc., without first obtaining written permission from the publisher (respective the copyright owner if other than Springer). The use of general descriptive names, trade names, trademarks, etc., in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.

    Springer has partnered with Copyright Clearance Center's RightsLink service to offer a variety of options for reusing Springer content. For permission to reuse our content please locate the material that you wish to use on link.springer.com or on springerimages.com and click on the permissions link or go to copyright.com, then enter the title of the publication that you wish to use. For assistance in placing a permission request, Copyright Clearance Center can be connected directly via phone: +1-855-239-3415, fax: +1-978-646-8600, or e-mail: info@copyright.com.


    © Institute of Engineering Mechanics, China Earthquake Administration and Springer-Verlag Berlin Heidelberg

Alerts for this journal

 

Get the table of contents of every new issue published in Earthquake Engineering and Engineering Vibration.